Find answers, ask questions and become part of the Loxone Community.
I’m using the Presence module connected to the P input on my Lighting block rather than using the Mv input. Presence has been active since 08:35 this morning and now that it’s getting dark, the light won’t come on. It all works fine when I test it in the simulation though.
Cheers,
Ewan
To add to the above, the lights came on with the lux level dropped to 2.1.
When the room is empty and dark, the lights come on when I enter the room.
Thanks,
Ewan
Same problem in the family room. Presence active since 12:17, lux fluctuating below the target value for over an hour and the lights haven’t come on yet. Manually adjusted the lux level in Live Preview right down to 0 and the lights still didn’t come on.
There is nothing connected to Mv, with the Presence function block being activated by the Presence Detector and QPr connected to P in the Lighting Controller.
Thanks,
Ewan
This evening, Presence active in the Family Room from 15:58 and the light came on when the lux level dropped around an hour later.