The Switch function block is used to toggle a digital output.
It can be controlled by a pushbutton or other logic, and via the user interface.
Table of Contents
Inputs↑
Abbreviation | Summary | Description | Value Range |
---|---|---|---|
Tg | Toggle | Switches output (O) on / off. | 0/1 |
Off | Off | Pulse: Outputs are reset / switched off. On: Block is locked. Dominating input. The name of the connected sensor is used in the user interface. |
0/1 |
On | Switches output (O) on. | 0/1 | |
DisPc | Disable periphery control | Disables all inputs when On. (e.g Child lock, cleaning) Control via user interface is still possible. |
0/1 |
Outputs↑
Abbreviation | Summary | Description | Value Range |
---|---|---|---|
O | Output | 0/1 | |
Off | Pulse when output (O) is switched off. | 0/1 | |
On | Pulse when output (O) is switched on. | 0/1 | |
AC | API Connector | Intelligent API based connector. API Commands |
- |
Parameters↑
Abbreviation | Summary | Description | Value Range | Default Value |
---|---|---|---|---|
Rem | Remanence input | Remanence input: If active, the function block retains its previous state after a Miniserver reboot. The state of the function block is saved: – When saving to the Miniserver – At a planned reboot – Before a backup – Once per hour The data is saved on the SD card. |
0/1 | 0 |
Timing Diagram↑
Presence Simulation↑
This function block has a presence simulation.
Activate and define the presence simulation in the properties window: