Fixed

General

• Database Connector – multiple references on client miniserver do not work
• BG-I33144: Disable cyclic sending of Database Connector on clients
• Update of client fails due to too big update file
  • Due to the larger update sizes for Miniserver Compacts, you may need to retry the update. Once updated, the system will handle large update files more efficiently.

Lighting

• BG-I32839: Configuration data corrupted for the DALI Extension

Audio

• Radio Stations not working in some cases
• Audio Jitter after about 1h of playback on some systems
• BG-I33178: Radio 88.6 not always starting
• BG-I32606 SPDIF start volume
• Backup of Audioserver did not work
• BG-I33330 Crash on initialization

Stability

• BG-I33317: Config crash when changing intercommunication password

Devices

• Touch Pure Flex:
  • Adjusted maximum display brightness to better fit with backlight

Energy

• Wallbox Session started/ended pulse not created in certain situations
• BG-I33172: Consumption today output wasn´t calculated

Fixed

General

• Database Connector – multiple references on client miniserver do not work
• BG-I33144: Disable cyclic sending of Database Connector on clients
• Update of client fails due to too big update file
  • Due to the larger update sizes for Miniserver Compacts, you may need to retry the update. Once updated, the system will handle large update files more efficiently.

Lighting

• BG-I32839: Configuration data corrupted for the DALI Extension

Audio

• Radio Stations not working in some cases
• Audio Jitter after about 1h of playback on some systems
• BG-I33178: Radio 88.6 not always starting
• BG-I32606 SPDIF start volume
• Backup of Audioserver did not work
• BG-I33330 Crash on initialization

Stability

• BG-I33317: Config crash when changing intercommunication password

Devices

• Touch Pure Flex:
  • Adjusted maximum display brightness to better fit with backlight

Energy

• Wallbox Session started/ended pulse not created in certain situations
• BG-I33172: Consumption today output wasn´t calculated

Fixed

General

• Database Connector – multiple references on client miniserver do not work
• BG-I33144: Disable cyclic sending of Database Connector on clients
• Update of client fails due to too big update file
  • Due to the larger update sizes for Miniserver Compacts, you may need to retry the update. Once updated, the system will handle large update files more efficiently.

Lighting

• BG-I32839: Configuration data corrupted for the DALI Extension

Audio

• Radio Stations not working in some cases
• Audio Jitter after about 1h of playback on some systems
• BG-I33178: Radio 88.6 not always starting
• BG-I32606 SPDIF start volume
• Backup of Audioserver did not work
• BG-I33330 Crash on initialization

Stability

• BG-I33317: Config crash when changing intercommunication password

Devices

• Touch Pure Flex:
  • Adjusted maximum display brightness to better fit with backlight

Energy

• Wallbox Session started/ended pulse not created in certain situations
• BG-I33172: Consumption today output wasn´t calculated

Fixed

General

• Database Connector – multiple references on client miniserver do not work
• BG-I33144: Disable cyclic sending of Database Connector on clients
• Update of client fails due to too big update file
  • Due to the larger update sizes for Miniserver Compacts, you may need to retry the update. Once updated, the system will handle large update files more efficiently.

Lighting

• BG-I32839: Configuration data corrupted for the DALI Extension

Audio

• Radio Stations not working in some cases
• Audio Jitter after about 1h of playback on some systems
• BG-I33178: Radio 88.6 not always starting
• BG-I32606 SPDIF start volume
• Backup of Audioserver did not work
• BG-I33330 Crash on initialization

Stability

• BG-I33317: Config crash when changing intercommunication password

Devices

• Touch Pure Flex:
  • Adjusted maximum display brightness to better fit with backlight

Energy

• Wallbox Session started/ended pulse not created in certain situations
• BG-I33172: Consumption today output wasn´t calculated

New 

• Exosphere: Session & Event Database Connector
  • write custom data to a database table defined in Exosphere
  • Configure table in Exosphere and add a Table object under Exosphere plugin in Loxone Config
  • Configure the data you want to write
  • Can be used for Billing, Logging, Monitoring, …
• Added MQTT client integration
  • insert MQTT integration under network periphery
  • one single connection to the same broker per Miniserver
  • max. 16 subscription inputs, max. 16 publish outputs
  • No real time communication
• Honeywell Plugin
  • seamlessly integrate Honeywell MB-Secure and MB-Secure Pro security systems with the Miniserver
  • support for arming and disarming, Detector groups, Macros, Doors, …
• Gardena Smart System integration
  • Receive states and control your Gardena smart devices (SILENO mowers, irrigation control, sensors, …)
• R20-T372 Dali Broadcast Mode for Dali Extension
• BG-T3514: M-Bus enable Primary Address Search
• A3D9-T1434: When switching through settings with tab, combo box drop-downs are now opened
  • A3D9-T1402: Load Manager Improvements
  • New “Peak Load Manager & Overload Protection” which combines peak load management with overload protection
  • New Load Shedding Delay Setting
  • General Improvements
• Logger: Send daily/weekly/monthly logs per email
  • File size is limited to 1 MB
• A3D9-T1410: Added columns for room and installation location to device status dialog
  • Installation location column is hidden per default
  • Added table settings button to show/hide columns
• A3D9-T1408: Grid preselection in project planning now allows to use 1-Phase Meter Tree
• A3D9-T1386: The advanced miniserver search now allows to use CIDR representation for ip ranges
• A3D9-T1433: New Output “Rest” in Energy Flow Manager
  • Shows rest power of the top group
• A3D9-T1348 Communication Monitor for AC Control
• Removed gentle mode from Valve Actuator Tree
• Added support for wave packet control to Dimmer Extension
• A3D9-T1391 Improved Auto Configuration
  • Presence Simulation is an option you can choose
  • Throughfares can have a presence block
  • Improved descriptions for options
  • Light moods ‘Relaxed Bright’ and ‘Creative’ no longer created
  • Button 6 on Touch Nightlight toggles Night Mode and LED Status represents if Night mode active
  • Water alarm does not call Fire Brigade
  • Panic Alarm has Touches of Sleeping Room connected
  • Air Devices used in Emergency Alarm automatically set to On/Off button behaviour
  • Power Supply & Backup function block created even when not yet fully configured
  • Adapted default values for Presence Sensors (volume (250 / 1000) and Presence Duration without movement (1800s))
  • Air Devices which get connected to Long Click function block are automatically set to On/Off button behaviour
  • Automatic Shades which don’t have yet a proper Dir parameter does not lock the app and can be still controlled
  • Audio Master/Client get a configuration dialog when inserted
• A3D9-T1403 Meters Calculate Power from Meter Reading when no power is connected
• Touch Pure Flex Gen.2
• Valve Actuator Gen.2
• AC for LG
• NFC Code Touch: added support for variable length tags with OCPP
• A3D9-T1491: Cloud Services now get Miniserver serial, version and update-level when Miniserver requests data, for better staging/production possibilities
  

  Fixed

  General

• BG-I32214 configure device button in network device learning dialog was in wrong state initially
• BG-I32308 HTTP body gets truncated when https request has no content length (virtual outputs, virtual http inputs)
• BG-I32302 Media Controller didn’t switch to a mode on power-on when there was never a mode set before (first use)
• BG-I29112 NFC Authentication auth via App not working with Two-Factor
• BG-I32232 Text Generator Connecting Uid outputs of Wallbox and NFC Authentication did not automatically connect to Uid input
• LiveView activates when Miniserver state changes
• BG-I32067 Custom Object-Permissions get lost when copy/pasting controls
• BG-I32296 Connecting multiple actors at once does not work via Connection-Window
• BG-I32411 Display Echo command on light controller is not as long active as before which breaks custom logic
• Hoermann Air commands not sent to device
• Some Air-Devices can’t be added
• Some diagnosis inputs are visible per default when learning the device via app
• BG-I32108 Internal Api commands visible in Flex Api Generator Dialog
• BG-I29892 NFC Authentication Value not verified in Config for parameter “Bbr”
• BG-I31907 NFC Authentication Wrong tooltip shown for inputs
• BG-I32200 NFC Authentication Connecting input via (+) does not always connect it to a correct input
• BG-I32189 NFC Authentication Dialog wrong output prefix ‘Q’ when output connected to outputs O1-O6
• BG-I31943 Status Monitor no check for invalid characters which could break structure file of app
• No info in caption bar when client Miniservers are not yet ready
• BG-I32101 Sequence Controller spaces get lost when concatenating text elements
• BG-I32012 App-Device-Search Tree of Intercom not shown
• BG-I31917 App-Device-Search missing switchboard-options for extension-search results
• BG-I31918 App-Device-Search Link Devices not replaceable
• BG-I3215 Multiple connections between same connectors possible
• BG-I31980 Presence Control delay activation via Touch Flex to avoid concurrent commands
• BG-I31830 Miniserver Gen.1 does not get an IP address from DHCP when it takes too long to answer (Increased timeouts)
• BG-I32053 Home Button not translatable
• Connection reference can be moved by selecting other objects
• BG-I31930 Insert of Audio devices not always enabled
• BG-I31148 HealthCheck got stuck in endless loop when executing diagnosis on Miniserver Compact with no stereo extensions connected
• BG-I32094 main menu in Project Management view is cutoff on small screen resolutions
• BG-I31910 when loading a project directly from Exosphere cancel didn’t always work as expected
• BG-I31174 reapply active filters when DeviceStatus data is updated
• BG-I32158 improved scrolling in MyProjects view
• Removed info message box when creating a trust
• Remanence of Analog memory not active per default
• No changes warning when trying to save to Miniserver and there are changes for a Trust
• BG-I31938 Statistics sent to app contain a duplicate entry on month change
• Text Inputs can’t be set via post webservice
• Touch Pure Flex LiveView cannot properly display ° sign
• BG-I31936 Config Tooltip shows device as offline when it just has come back online
• BG-I31982 T5 causes a new edge when closing view after controlling it via LiveView
• BG-I31979 State Text condition not working when a text is set
• BG-I31852 Renaming Intercom Gen.1 with a number does not work
• Spread up send of statistics mail among Miniservers so that not all send at the same time
• BG-I31957 Connecting with dns.loxonecloud.com/{serial} as address throws an error
• BG-I20837 Internorm analogue sensor shown as if correction is active in LiveView
• BG-I31936 Config Tooltip shows device as offline when it just has come back online
• BG-I32342: Home Connect added logging for rate limiting errors
• Fire- / Wateralarm has statistics setting
• BG-I32414: Device Status set default focus to search bar
• Door and Window Monitor invalid text at output Txu
• Logging properties not shown when control has a referenced device
• BG-I32084: Windows & Status Monitor Wrong states when references from client were used
• BG-I32484: Touch Pure Flex brightness is disabled as soon as actor is used in visualization
• Presence detection tracker entry not clear enough when started by app
• Missing texts for new inputs of Window and Window Central
• HTTP Query parameters do not work over WebSocket, causing logout of app
• BG-I32840: Project Validation Statistic entries not used in calculation when connected to Gen.2 Miniservers
• BG-I32735 prevent insertion of TAB characters in System Scheme
• BG-I32991: slow config performance when rebuilding connection flags
• BG-I32805: Password quality check in Loxone Config shows green if the username appears in password
• BG-I32455: Wallbox Manager no target power on Wallbox, if Wallbox and Wallbox Manager on different clients
• Valve Tree does not update its hardware version when it’s learned in by entering the serial manually
• FTP server fails to start on Miniserver Gen.2 when certificate setting is invalid
• BG-I32875: Device status shows new icon for old valve actuator
• Exo Database Connector: Allow Api-Actor on client Miniservers
• BG-I32959: Air Sensors maximum button press duration has no effect
• Tree tooltip shows device as offline even when being online
• BG-I32711: Device Status invalid last receive time of air devices when refreshing status
• Device Status Dialog showed devices without online state as online
• BG-I32611: Hunter Douglas Gen.3 not working with alpha
• BG-I32426: Reference name not updated when function block name changed via App
• BG-I32540: Search for Config ID is now possible
• Fixed login for Admin-Interface
• Minutes Impulse not always triggered
• BG-I32651: Analog sensor completely yellow and no selection visible
• BG-I32331: Permissions of app connections get change when editing control in expert mode
• Device status: wrong icon from M-Bus Extension
• Schedule not immediately recalculated when operating mode changes
• BG-I31910: ESC key didn’t cancel loading of project from Exosphere properly
• BG-I28956: BACnet input reference can’t be copied

Lighting

• BG-I32299 Smart TW Dali actor shows not-supported fade rate in settings
• BG-I31870 Daylight Responsive Lighting step size can be larger than defined maximum steps
• BG-I31976 Light-Circuits configured as Switch are handled as analogue for connected Trackers, Loggers, …
• BG-I32485: Invalid description for XAL Luminaire head caption
• BG-I32922: XAL Light Air Invalid IO’s after converting document
• BG-I32411: Lighting Controller add scene name to RINFO-Command
• BG-I32548: Light Controller output 2C not working if Tdc = Mmd
• BG-I30183: DALI single actuator (not group) min dim level does not work as described

Climate

• BG-I32217 AC does not use adapted target temperature when Eh/Ec is active
• Intelligent Room controller doesn’t validate mode set by app based on capabilities
• BG-I32103 Heating and cooling control Calculation of visualization is not correct
• BG-I31770 Blocked Room controllers are not visible in Heating and Cooling Controller after reboot
• BG-I31959 Mode “Fixed Setpoint” reset after saving into Miniserver
• BG-I32073 Heating and Cooling Controller set to Auto via app does not adapt parameter-value
• BG-I31770 Blocked Room controllers are not visible in Heating and Cooling Controller after reboot
• BG-I32103 Heating and cooling control Calculation or visualization is not correct

Shading

• Automatic Shading new parameter ‘Rdd’ to enable reference drive for Complete Up ad Complete Down
  • Activate this parameter if you have special shades which need a reference drive down to fully close, often the case when the shades have different physical dead times for up and down
• Auto jalousie: change of sunshine state recognized with a delay
• BG-I32076: Automatic Shading goes back to shading position
• BG-I32394: Automatic Shading Motor lock duration (Mld) affects the same direction using Po/Pc

Devices

• Wallbox Tree/Air:
  • try using the workaround solution to wake up vehicles that have fallen asleep.
  • (Air): Wallbox Air not responding when not charging
• Touch Air
  • Sometimes not sending temperature/humidity
• Dimmer Extension
  • BG-I32029 Dimmer Extension restarts when there are unconfigured outputs
• RGBW Dimmer Air / Tree
  • Adapted dimming curve to old behaviour
• Touch Pure Air V3
  • improved sensitivity (BG-I30552, BG-I29663)
• Valve Actuator Gen.2 Air & Tree:
  • improved reference drive
  • fixed status led patterns
  • fixed input button handling on battery powered valve air
• AC Control Air
  • BG-I31531 & BG-I31561: Toshiba stuck in initialization sequence
• M-Bus Extension
  • BG-I30294: M-Bus device can’t be found
  • BG-I29380: M-Bus extension can’t find specific device
• Valve Actuator Air
  • BG-I32439, BG-I32313, BG-I31981: Poor air communication performance

Audio

• BG-I32277 Audio channels visible when using stereo group
• Off does not lock TTS
• BG-I32035 Forward Lock-State to app
• BG-I32341 Music Player shows Airplay/Spotifiy settings in Expert Mode when managed by Playergroup
• BG-I32340 Send Room Favourite Priority as individual command when changed via Expert Mode
• BG-I32162 Audioservers which will not allow pairing shown in search-dialog
• BG-I32036: Player Group Fix Setting for handling service by group not disabled when using master-client players
• Off Input of player was not correctly handled
• Event Playback was truncated in certain configurations
• Spotify gets distorted after approx. 4h playback
• LineIn gets out of sync over time
• Playback after Event was not correct, could show playing but was muted
• Migrated to newest library for playback & sync audio
• Soundsuit files are not deleted correctly from RAM disk leading to an out-of-memory condition
• Radio stations not correctly playing again after paused (SRF-3, maybe others too)
• LineIn stop when transit to Bluetooth
• Possible Remote Code Execution Vulnerability in the Communication between Miniserver & Audioserver
• Handle permanent Input on ‘Off’ for Audio Player, Audio Central, Audio Group fixed
  • When On, Playback and events were stopped
  • Services like Spotify connect, Airplay and Bluetooth are actively disconnected and disabled

Multiplicator

• BG-I32087 Trust IOs created in inheriting project inserted on wrong parent
• BG-I32086 Can’t permit users to Trust IOs

Diagnostics

• BG-I28670 Internorm Monitor does not display anything when button is pressed
• BG-I31864 Device information contains duplicate data

Gateway

• BG-I31560 Fetch of def.log from client via device status does not always work

Energy

• Spot Price Optimizer may use intervals further in the future instead of earlier ones when the price is the same
• BG-I32278 Wallbox Enable state and target power not correctly sent when managed by Wallbox Manager
• BG-I31135 Wallbox Meter reading input reset when receiving data from device
• BG-I30324 Default name for Total Meter of Power Supply & does not fit Control-name
• BG-I32480: Energy Flow Monitor Config dialog shows invalid items in rare cases

Auto Configuration

• BG-I32204 Humidity and CO2 does not get connected to IRC
• BG-I32381: Table lamp in Shading blocks
• BG-I32380: House in Deep Sleep and Party not creating mode

Trust

• App has no information when user was disabled by Trust source

Security

• Path Traversal in WebSocket allows access for authenticated users to system files

Stability

• BG-I32365 Config crash when searching for AC
• BG-I32041 Miniserver starts emergency program after a freshly formatted SD card
• BG-I32150 Miniserver has a watchdog reboot when flushing statistics (e.g. at midnight)
• BG-I32168 Config crash when creating Undo
• BG-I32173 Config crash after changing room
• Config crash when setting a serial which is already used
• BG-I31939 Config crash when window control is connected to IRC
• Config crash when setting a serial which is already used
• BG-I31939 Config crash when window control is connected to IRC
• BG-I32154 Config crash when changing IRC template
• BG-I32445: Safety reboot when Hint-Text contains %-characters
• BG-I32193: Miniserver watchdog reboot while statistics are fetched
• BG-I32733 fixed possible crash when opening System Schematic dialog
• BG-I32634: Config crash when starting update
• Send of statistics mail is now further spread to improve stability of send
  • Mail will be sent between 00:00 and 03:00 depending on Miniserver serial number
• BG-I32704: Miniserver reboot when alarm clock gets unlocked
• BG-I32549: crash when received data of HTTP input too large

New 

• Exosphere: Session & Event Database Connector 

• write custom data to a database table defined in Exosphere 

•  Configure table in Exosphere and add a Table object under Exosphere plugin in Loxone Config 

• Configure the data you want to write 

• Can be used for Billing, Logging, Monitoring,… 

• NFC Code Touch: added support for variable length tags with OCPP 

• A3D9-T1491: Cloud Services now get Miniserver serial, version and update-level when Miniserver requests data, for better staging/production possibilities 

• Added MQTT client integration 

• insert MQTT integration under network periphery 

• one single connection to the same broker per Miniserver 

• max. 16 subscription inputs, max. 16 publish outputs 

• No real time communication 

• R20-T372 Dali Broadcast Mode for Dali Extension 

• Honeywell Plugin 

• seamlessly integrate Honeywell MB-Secure and MB-Secure Pro security systems with the Miniserver 

• support for arming and disarming, Detector groups, Macros, Doors, … 

• BG-T3514: M-Bus enable Primary Address Search 

• A3D9-T1434: When switching through settings with tab, combo box drop-downs are now opened 

• A3D9-T1402: Load Manager Improvements 

• New “Peak Load Manager & Overload Protection” which combines peak load management with overload protection 

• New Load Shedding Delay Setting 

• General Improvements 

• Logger: Send daily/weekly/monthly logs per email 

• File size is limited to 1 MB 

• A3D9-T1410: Added columns for room and installation location to device status dialog 

• Installation location column is hidden per default 

• Added table settings button to show/hide columns 

• A3D9-T1408: Grid preselection in project planning now allows to use 1-Phase Meter Tree 

• A3D9-T1386: The advanced miniserver search now allows to use CIDR representation for ip ranges 

• A3D9-T1433: New Output “Rest” in Energy Flow Manager 

• Shows rest power of the top group 

 

Fixed 

General 

• HTTP Query parameters do not work over WebSocket, causing logout of app 

• BG-I32840: Project Validation Statistic entries not used in calculation when connected to Gen.2 Miniservers 

• BG-I32735 prevent insertion of TAB characters in System Scheme 

• BG-I32991: slow config performance when rebuilding connection flags 

• BG-I32805: Password quality check in Loxone Config shows green if the username appears in password 

• BG-I32455: Wallbox Manager no target power on Wallbox, if Wallbox and Wallbox Manager on different clients 

• Valve Tree does not update its hardware version when its learned in by entering the serial manually 

• FTP server fails to start on Miniserver Gen.2 when certificate setting is invalid 

• BG-I32875: Device status shows new icon for old valve actuator 

• Exo Database Connector: Allow Api-Actor on client miniservers 

• BG-I32959: Air Sensors maximum button press duration has no effect 

• Tree tooltip shows device as offline even when being online 

• BG-I32711: Device Status invalid last receive time of air devices when refreshing status 

• Device Status Dialog showed devices without online state as online 

• BG-I32611: Hunter Douglas Gen.3 not working with alpha 

• BG-I32426: Reference name not updated when function block name changed via App 

• BG-I32540: Search for Config ID is now possible 

• Fixed login for Admin-Interface 

• Minutes Impulse not always triggered 

• BG-I32651: Analog sensor completely yellow and no selection visible 

• BG-I32331: Permissions of app connections get change when editing control in expert mode 

• Device status: wrong icon from M-Bus Extension 

• Schedule not immediately recalculated when operating mode changes 

• BG-I31910: ESC key didn’t cancel loading of project from Exosphere properly 

• BG-I28956: BacNet input reference can’t be copied 

Audio 

• BG-I32036: Player Group Fix Setting for handling service by group not disabled when using master-client players 

Lighting 

• BG-I32922: XAL Light Air Invalid IO’s after converting document 

• BG-I32411: Lighting Controller add scene name to RINFO-Command 

• BG-I32548: Light Controller output 2C not working if Tdc = Mmd 

• BG-I30183: DALI single actuator (not group) min dim level does not work as described 

Shading 

• Automatic Shading new parameter ‘Rdd’ to enable reference drive for Complete Up ad Complete Down. 

• Auto jalousie: change of sunshine state recognized with a delay 

• BG-I32076: Automatic Shading goes back to shading position 

• BG-I32394: Automatic Shading Motor lock duration (Mld) affects the same direction using Po/Pc 

Stability 

• BG-I32733 fixed possible crash when opening System Schematic dialog 

• BG-I32634: Config crash when starting update 

• Send of statistics mail is now further spread to improve stability of send 

• Mail will be sent between 00:00 and 03:00 depending on Miniserver serial number 

• BG-I32704: Miniserver reboot when alarm clock gets unlocked 

• BG-I32549: crash when received data of HTTP input too large 

Security 

• Path Traversal in WebSocket 

Devices 

• Valve Actuator Gen2 Air & Tree: 

• • improved reference drive 

• • fixed status led patterns 

• • fixed input button handling on battery powered valve air 

• AC Control Air 

• • BG-I31531 & BG-I31561: Toshiba stuck in initialization sequence 
• M-Bus Extension 

• • BG-I30294: M-Bus device can’t be found 

• • BG-I29380: M-Bus extension can’t find specific device 

• • BG-I28704: M-Bus values are jumping 

• Valve Actuator Air 

• • BG-I32439, BG-I32313, BG-I31981: Poor air communication performance 

• NFC Code Touch Tree 

• • BG-I27686 learn monitor interactions not working 

• NFC Code Touch Air 

• • BG-I26785 sometimes not showing status led feedback in battery mode 

• Nano IO Air 

• • BG-I26173 devices go offline until power reset 

Climate 

• BG-I32720: HVAC USA minimum temperature for cooling can be set below protection temperature 

• BG-I32579: AC Unit controller has 2 timers active at once 

• BG-I32583: Room ventilation controller: Input Sat not as other outdoor temp. Inputs 

• BG-I32670: Intelligent Room Controller: mode set via touch flex gets reverted 

• Pause time of AC control does not reactivate at the end of pause 

• BG-I32511: Intelligent Room Controller multiple air condition links in visualization 

• BG-I32779: Heating and Cooling Controller shows invalid demand 

• Intelligent Room Controller Excess Energy not applied for timers started via app 

• BG-I32479: Intelligent Room Controller excess heating not applied when comfort/eco was started via inputs 

• BG-I32597: Intelligent Room Controller toggles between heating & cooling (using single comfort temperature, Fahrenheit) 

• BG-I32759: HVAC Controller Emergency Heating webservice not working 

Energy 

• BG-I32794: Wallbox: Automatically disable relative metering when connecting Energy Meter Tree 

Project Planning 

• BG-I32680: New valve actuator is not available as a global preselection 

• BG-I32855: Dali devices not properly named 

Auto Configuration 

• BG-I32726: Mistake in House in Deep Sleep and Party tooltip string 

• BG-I32617: Panic block not renamed 

• BG-I32551: Presence simulation false description 

New 

• Touch Pure Flex Gen.2 

• Valve Actuator Gen.2 

• AC for LG 

Fixed 

General 

• BG-I32342: Home Connect added logging for rate limiting errors 

• Fire- / Wateraalarm has statistics setting 

• BG-I32414: Device Status set default focus to search bar 

• Door and Window Monitor invalid text at output Txu 

• Logging properties not shown when control has a referenced device 

• BG-I32084: Windows & Status Monitor Wrong states when references from client were used 

• BG-I32484: Touch Pure Flex brightness is disabled as soon as actor is used in visualization 

• Presence detection tracker entry not clear enough when started by app 

• Missing texts for new inputs of Window and Window Central 

Lighting 

• BG-I32485: Invalid description for XAL Luminaire head caption 

Stability 

• BG-I32445: Safety reboot when Hint-Text contains %-characters 

• BG-I32193: Miniserver watchdog reboot while statistics are fetched 

Devices 

• Touch Pure Air V3 

• • improved sensitivity (BG-I30552, BG-I29663) 

Energy 

• BG-I32480: Energy Flow Monitor Config dialog shows invalid items in rare cases 

Auto Configuration 

• BG-I32381: Table lamp in Shading blocks 

• BG-I32380: House in Deep Sleep and Party not creating mode 

New 

• Gardena Smart System integration 

• • read states and control your Gardena smart devices (SILENO mowers, irrigation control, sensors, … 

• A3D9-T1348 Communication Monitor for AC Control 

• • Removed gentle mode from Valve Actuator Tree 

• • Added support for wave packet control to Dimmer Extension 

• • A3D9-T1391 Improved Auto Configuration 

• • Presence Simulation is an option you can choose 

• • Throughfares can have a presence block 

• • Improved descriptions for options 

• • Light moods ‘Relaxed Bright’ and ‘Creative’ no longer created 

• • Button 6 on Touch Nightlight toggles Night Mode and LED Status represents if Night mode active 

• • Water alarm does not call Fire Brigade 

• • Panic Alarm has Touches of Sleeping Room connected 

• • Air Devices used in Emergency Alarm automatically set to On/Off button behaviour 

• • Power Supply & Backup function block created even when not yet fully configured 

• • Adapted default values for Presence Sensors (volume (250 / 1000) and Presence Duration without movement (1800s)) 

• • Air Devices which get connected to Long Click function block are automatically set to On/Off button behaviour 

• • Automatic Shades which don’t have yet a proper Dir parameter does not lock the app and can be still controlled 

• • Audio Master/Client get a configuration dialog when inserted 

• A3D9-T1403 Meters Calculate Power from Meter Reading when no power is connected 

Fixed 

General 

• BG-I32214 configure device button in network device learning dialog was in wrong state initially 

• BG-I32308 HTTP body gets truncated when https request has no content length (virtual outputs, virtual http inputs) 

• BG-I32302 Media Controller didn’t switch to a mode on power-on when there was never a mode set before (first use) 

• BG-I29112 NFC Authentication auth via App not working with Two-Factor 

• BG-I32232 Text Generator Connecting Uid outputs of Wallbox and NFC Authentication did not automatically connect to Uid input 

• LiveView activates when Miniserver state changes 

• BG-I32067 Custom Object-Permissions get lost when copy/pasting controls 

• BG-I32296 Connecting multiple actors at once does not work via Connection-Window 

• BG-I32411 Display Echo command on light controller is not as long active as before which breaks custom logic 

• Hoermann Air commands not sent to device 

• Some Air-Devices can’t be added 

• Some diagnosis inputs are visible per default when learning the device via app 

• BG-I32108 Internal Api commands visible in Flex Api Generator Dialog 

• BG-I29892 NFC Authentication Value not verified in Config for parameter “Bbr” 

• BG-I31907 NFC Authentication Wrong tooltip shown for inputs 

• BG-I32200 NFC Authentication Connecting input via (+) does not always connect it to a correct input 

• BG-I32189 NFC Authentication Dialog wrong output prefix ‘Q’ when output connected to outputs O1-O6 

• BG-I31943 Status Monitor no check for invalid characters which could break structure file of app 

• No info in caption bar when client Miniservers are not yet ready 

• BG-I32101 Sequence Controller spaces get lost when concatenating text elements 

• BG-I32012 App-Device-Search Tree of Intercom not shown 

• BG-I31917 App-Device-Search missing switchboard-options for extension-search results 

• BG-I31918 App-Device-Search Link Devices not replaceable 

• BG-I3215 Multiple connections between same connectors possible 

• BG-I31980 Presence Control delay activation via Touch Flex to avoid concurrent commands 

• BG-I31830 Miniserver Gen.1 does not get an IP address from DHCP when it takes too long to answer (Increased timeouts) 

• BG-I32053 Home Button not translatable 

• Connection reference can be moved by selecting other objects 

• BG-I31930 Insert of Audio devices not always enabled 

• BG-I31148 HealthCheck got stuck in endless loop when executing diagnosis on Miniserver Compact with no stereo extensions connected 

• BG-I32094 main menu in Project Management view is cutoff on small screen resolutions 

• BG-I31910 when loading a project directly from Exosphere cancel didn’t always work as expected 

• BG-I31174 reapply active filters when DeviceStatus data is updated 

• BG-I32158 improved scrolling in MyProjects view 

• Removed info message box when creating a trust 

• Remanence of Analog memory not active per default 

• No changes warning when trying to save to Miniserver and there are changes for a Trust 

• BG-I31938 Statistics sent to app contain a duplicate entry on month change 

• Text Inputs can’t be set via post webservice 

• Touch Pure Flex LiveView cannot properly display ° sign 

• BG-I31936 Config Tooltip shows device as offline when it just has come back online 

• BG-I31982 T5 causes a new edge when closing view after controlling it via LiveView 

• BG-I31979 State Text condition not working when a text is set 

• BG-I31852 Renaming Intercom Gen.1 with a number does not work 

• Spread up send of statistics mail among Miniservers so that not all send at the same time 

• BG-I31957 Connecting with dns.loxonecloud.com/{serial} as address throws an error 

• BG-I20837 Internorm analogue sensor shown as if correction is active in LiveView 

• BG-I31936 Config Tooltip shows device as offline when it just has come back online 

Lighting 

• BG-I32299 Smart TW Dali actor shows not-supported fade rate in settings 

• BG-I31870 Daylight Responsive Lighting step size can be larger than defined maximum steps 

• BG-I31976 Light-Circuits configured as Switch are handled as analogue for connected Trackers, Loggers,… 

Stability 

• BG-I32365 Config crash when searching for AC 

• BG-I32041 Miniserver starts emergency program after a freshly formatted SD card 

• BG-I32150 Miniserver has a watchdog reboot when flushing statistics (e.g. at midnight) 

• BG-I32168 Config crash when creating Undo 

• BG-I32173 Config crash after changing room 

• Config crash when setting a serial which is already used 

• BG-I31939 Config crash when window control is connected to IRC 

• Config crash when setting a serial which is already used 

• BG-I31939 Config crash when window control is connected to IRC 

• BG-I32154 Config crash when changing IRC template 

Climate 

• BG-I32217 AC does not use adapted target temperature when Eh/Ec is active 

• Intelligent Room controller doesn’t validate mode set by app based on capabilities 

• BG-I32103 Heating and cooling control Calculation of visualization is not correct 

• BG-I31770 Blocked Room controllers are not visible in Heating and Cooling Controller after reboot 

• BG-I31959 Mode “Fixed Setpoint” reset after saving into miniserver 

• BG-I32073 Heating and Cooling Controller set to Auto via app does not adapt parameter-value 

• BG-I31770 Blocked Room controllers are not visible in Heating and Cooling Controller after reboot 

• BG-I31959 Mode “Fixed Setpoint” reset after saving into miniserver 

• BG-I32103 Heating and cooling control Calculation or visualization is not correct 

Shading 

Devices 

• Wallbox Tree/Air: 

• • try using the workaround solution to wake up vehicles that have fallen asleep. 

• • (Air): Wallbox Air not responding when not charging 

• Touch Air 

• • Sometimes not sending temperature/humidity 

• Dimmer Extension 

• • BG-I32029 Dimmer Extension restarts when there are unconfigured outputs 

• RGBW Dimmer Air / Tree 

• • Adapted dimming curve to old behaviour 

Audio 

• BG-I32277 Audio channels visible when using stereo group 

• Off does not lock TTS 

• BG-I32035 Forward Lock-State to app 

• BG-I32341 Music Player shows Airplay/Spotifiy settings in Expert Mode when managed by Playergroup 

• BG-I32340 Send Room Favorite Priority as individual command when changed via Expert Mode 

• BG-I32162 Audioservers which will not allow pairing shown in search-dialog 

Multiplicator 

• BG-I32087 Trust IOs created in inheriting project inserted on wrong parent 

• BG-I32086 Can’t permit users to Trust IOs 

Diagnostics 

• BG-I28670 Internorm Monitor does not display anything when button is pressed 

• BG-I31864 Device information contains duplicate data 

Gateway 

• BG-I31560 Fetch of def.log from client via device status does not always work 

Energy 

• Spot Price Optimizer may use intervals further in the future instead of earlier ones when the price is the same 

• BG-I32278 Wallbox Enable state and target power not correctly sent when managed by Wallbox Manager 

• BG-I31135 Wallbox Meter reading input reset when receiving data from device 

• BG-I30324 Default name for Total Meter of Power Supply & does not fit Control-name 

Auto Configuration 

• BG-I32204 Humidity and CO2 does not get connected to IRC 

Trust 

• App has no information when user was disabled by Trust source 

Fixed 

General 

• Config crash when setting a serial which is already used 

• BG-I31936: Config Tooltip shows device as offline when it just has come back online 

• BG-I31939: Config crash when window control is connected to IRC 

• BG-I31770: Blocked Room controllers are not visible in Heating and Cooling Controller after reboot 

• BG-I31959: Mode “Fixed Setpoint” reset after saving into miniserver 

• BG-I32029: Dimmer Extension restarts when there are unconfigured outputs 

• BG-I32103: Heating and cooling control – Calculation or visualization is not correct 

• Adapted dimming curve of RGBW Dimmer Air & Tree to old behaviour 

• BG-I32154: Config crash when changing IRC template 

New 

• A3D9-T1330 Hunter Douglas Power View 3 Support 

• • Supports Hunter Douglas Gen. 2 and Gen. 3 

• • New Analog Output TPos (0..100) for Shading Block 

• A3D9-T1347: Ac Unit Controller: Added History 

• DALI Extension: DALI2 support for DALI Extension with HW Id 4 

• OCPP 

• • A3D9-T1344: Support for Sending Error Codes to Backend 

• • A3D9-T1339: Support for Reporting Wallbox Model properly 

• • A3D9-T1338: Support for Reporting Serial number and Firmware Version 

• • A3D9-T1337: Support for Remote Start/Stop Transactions 

• A3D9-T1320: Exo plugin v1.1.0 

• • Send control statistics to Exosphere 

• • “onboarding” from Config using provisioning code 

• A3D9-T1371 Setting icon for objects in periphery tree is now displayed instead of normal icon for better accessibility 

• Added Wever & Ducré Light Tree 

• A3D9-T1388: Audio Volume Fading 

• A3D9-T1250: Garage/Gate Central: Added “Partially Open” Input 

• A3D9-T1336: Audioplayer: Added Bluetooth pairing output 

• A3D9-T1335: Parameters can now be added as a Combo Box 

• A3D9-T1335: Changed Parameters to Combo boxes in some blocks 

• Gate controller Severity of system messages set to important so that a push will be sent 

• Valve Actuator Tree: new default operation mode: “gentle mode” 

• • If activated, the valve actuator moves to 5% instead of 0% to reduce wear, with every 20th command it will still move to 0% to prevent drift. 

• • Disabling this mode reverts the actuator to its original behaviour, where 0% commands result in 0% movement. 

• BG-I30796 NFC Code Touch Block: Deleting all entries is now possible 

• BG-I30795 NFC Code Touch Block: CSV Template now uses the time formats of system locale 

• Planning: 

• • Added new NFC Smart Cards 

• Added context menu to Health Check to select items in periphery tree 

• Auto Configuration 

• • Support for Hunter Douglas 

• A3D9-T1393: Message Center: showing recent messages with thumbnails and added possibility to delete messages 

• A3D9-I10: Audio Diagnosis performs basic network checks and serial verification for offline Audioservers 

Fixed 

General 

• Cloud Services are reported as inactive when request fails 

• Auto connect to Miniserver does not use addresses from project 

• BG-I31336 Virtual HTTP input can’t be fetched in config when using only a username and no password 

• Settings of Alarm Siren Tamper input not correctly set for new devices 

• Import of User can’t parse NFC tag when it contains quotes 

• Connection to Miniserver fails and no message is generated 

• Analog Sensor not directly displayed as offline anymore after a Miniserver restart 

• RC Key view dialog setting suggests editing 

• Miele token timeouts resulting in a re-login 

• NFC Codes stop working when updating from an older version 

• BG-I31023 OCPP Wrong formatting in Description of server address setting 

• BG-I30924: Fixed Config crash when creating Belimo Devices 

• BG-I25014: Missing/invalid entries in Belimo Monitor 

• BG-I31367 Gusts of weather service not working on client/gateway 

• BG-I31350 Add of Miniserver to a Gateway does not preselect an external address 

• BG-I27375 RS485 call command 

• BG-I25234 RS485 does not receive more than 512 characters 

• Row in Generic View (e.g. Miniserver search) shown as selected but not actually selected 

• BG-I31297 Periphery tree jumps when editing an item 

• BG-I31339 All Plugin actors (e.g. Home Connect) are set on a reboot instead of only the used ones 

• BG-I30868: Expert Mode: Users with direct access to control can’t select all available rooms 

• BG-I31149: Permission Dialog shows wrong data after changing room of control 

• BG-I30896: Automatic-Designer conditions for NFC-text outputs only triggered once 

• BG-I30928: Energy Meter Tree: Add sensor-information to tree monitor 

• BG-I31025 Virtual Input stayed red after changing Min/Max 

• BG-I31142 Central Controls: ‘Off’ in combination with DisPc permanently blocks configured controls 

• BG-I31196 Invalid or missing options for AC Unit Controller in automatic designer 

• BG-I31144 Equal block ON because of rounding error 

• BG-I30969 Too long control commands to a client may file (e.g. editing schedule block which is on a client) 

• Older version can’t be installed over newer version of Loxone Config 

• BG-I20283 Online status not monitored system message gets shown 

• BG-I30784 Monoflop getting stuck on On 

• BG-I30815 New documents don’t have country set, resulting in wrong preselected air channels 

• BG-I31100 Selection gets lost, when pasting multiple controls 

• BG-I31036 fixed slightly mismatching font-size between App and Config in system schematic 

• BG-I30976 ensuring that HTML entities are encoded to Unicode for display in MessageCenter 

• BG-I31037 System Schematics: fixed handling for moving of items and scrolling of view by keyboard 

• BG-I30382 Login with Loxone account in Config wasn’t possible if username/password contained ‘+’ sign 

• A3D9-T1331 Improved some bugs with the auto positioning 

• BG-I30786 Window Block not closing if Weather Protection input is on and miniserver restarts 

• BG-I30854 Fetch of backup file list from devices fails occasionally 

• Connection to Miniserver cant be established sometimes when connecting out of keychain 

• Invalid Jsons when values are invalid 

• Cloud Mailer continues to send emails despite quota already reached 

• OCPP 

• • Plugin has high memory usage 

• • NCF Authentication: new authorization request sent when another authentication is in progress 

• • Wallbox: not all states sent to Plugin after reboot 

• BG-I26940: Detailed Device Information for some AIR devices is not working 

• CloudDNS request is now done with HTTPS and in a more general manner 

• BG-I31630: Gate Controller has wrong options for type 

• BG-I31631: IRC is shown as unconfigured in project analysis when only AC Controllers are connected 

• BG-I31632: AC Central Controller is shown as an error in project analysis 

• BG-I31586: Automatic Designer: missing translations for Heating and Cooling Controller 

• BG-I31471: App Search tree: keep search results after automatic end of search 

• Miniserver configuration dialog shows wrong current address, when connected externally 

• BG-I31345: Certain values can’t be set via expert mode on some settings 

• BG-I31507: IR sensors can’t be controlled via LiveView 

• BG-I31346: System schematic has a visualization password setting 

• BG-I31523: NFC Tag not exporting when exporting users (only first tag will be exported) 

• Single click on text ‘Edit…’ in property window does not open the edit dialog 

• BG-I31399: Hörmann Air: Invalid visibility of travel duration parameters 

• BG-I31595: Config locks up when dragging a constant to a parameter 

• BG-I31599: Connecting from Miniserver Keychain does not use project data when internal and external address is empty 

• BG-I31375: Message Center view was incorrectly hiding some messages in some situations 

• Certificate fetch on Miniserver Gen.1 not retried fast enough 

• BG-I31658: Update of internal Audioserver on Miniserver Compact fails 

• BG-I31400: Normal Config search can’t find objects with diacritics 

• BG-I31667: ‘Delay after start’ setting is not used on Burglar alarm, when before the reboot a sensor was active 

• BG-I31757: Io names not displayed depending if the category or room is set 

• BG-I31761: Miniserver Replace does not properly create a backup anymore 

• BG-I25252: New-Device-Bubble in Gateway documents shows wrong or no data 

• User management dialog does not have a proper title 

• Tooltip in Tree does not always show a text when colour of item is not green 

• Selection in User management dialog jumps when a Username gets edited 

• Users and Groups in User management dialog not properly sorted 

• Dialog does not open centred on the screen 

• Connection reference shown as active, when connected to API output 

• Error message when saving to Miniserver 

• BG-I31707: MIN/MAX Commands not handled in Sequence Controller 

• BG-I31460: Miniserver search dialog showed encrypted Exo credentials, instead of asking user for master password for decryption 

• BG-I31483: items in system scheme view couldn’t be aligned properly after changing the scale of the image 

• Fixed data loss in interprocessor communication for Miniserver Go Gen2, Miniserver Compact, Miniserver Gen2 

• BG-I31615: Intercommunication learn dialog didn’t update count column on package reception 

Lighting 

• BG-I30183: DALI single actuator (not group) min dim level does not work as described 

• BG-I29018: DALI 8 fade rate jump not working with daylight control 

• BG-I28842: Dali lamp -> Online in the periphery tree Offline in the device status 

• BG-I28606: Device Status Dali Devices shown as offline 

• BG-I27520: Periphery Tree Dali Device shown with red dot 

• BG-I25345: Human Centric Lighting Dali DT8 parameter Ft causes last manual change to get stuck 

• BG-I25237: Dali offline device replace function 

• BG-I30304: DALI groups not working on firmware 15.0.3.25 

• BG-I29042: Dali Air does not send all commands 

• BG-I31569: Light controller displays no states after disconnecting output 

• Fixed Miniserver crash when DALI Broadcast Actor is used 

• Fixed DALI Min/Max brightness settings for Smart Actuators 

Planning 

• BG-I31275 Wrong Master/Client count calculated 

• BG-I31055 Energy Meter type for Wallbox Meter incorrect 

• BG-I31191 Power usage of extensions does not match datasheets 

• BG-I31251 Stereo Extension has a colour setting 

Stability 

• BG-I31377 Auto Save of project may interrupt opened dialogs 

• BG-I31477 Config crash when opening Backup/Update dialog 

• BG-I31391 Config crash 

• Config crash when loading Touch Pure Flex configuration 

• BG-I31360 Config crash when opening project 

• Config crash when connecting to Miniserver via search 

• Config crash when loading from Multiplicator Miniserver 

• BG-I31099 Miniserver reboot when Dali group actor changes 

• BG-I31099 Miniserver reboot when Dali group actor changes 

• BG-I31056 Config crash when opening Multiplicator file with a deleted climate block 

• BG-I29486: Increased stability of Loxone Config when saving large project files 

• BG-I31626: Config crash when opening project 

• BG-I31705: Miniserver reboot when receiving text memory changes from another Miniserver 

• BG-I31228: Watchdog Reset while creating Backup via /dev/sys/createbackup 

Climate 

• AC Unit Controller Silent Mode overrides manual timer 

• AC Unit Controller timer not properly remanent 

• BG-I31459 Weatherserver does not have data anymore of previous hours (needed for weather data with absolute hour set) 

• Learning per default disabled on IRC but room presets overwrite that preset 

• BG-I31019 Flow Temperature Calculator not having a hysteresis for calculation with buffer temperature 

• BG-I31223 Ac Control: do not cancel timers when ending silent mode 

• BG-I31057 Fixed race condition in copying IRC data 

• BG-I31198 Intelligent Room controller: allowed Range for Input ϑExc not documented 

• BG-I31170 Mixing Valve Controller: improved description of Error-Output 

• AC Unit controller now has a settings-state for the app, which enables the app to faster display the settings page 

• AC Unit Controller: Silent Mode not working when set to Off and AC is controlled by IRC 

• Text in IRC dialog cut off 

• IRC is blinking when dragging an AC Control Air onto the page 

• BG-I31312: Remove cyclic mode message to device 

• BG-I31266: AC Control does not update IRC-Data after lock 

• BG-I31369: Hvac controller triggers prepare phase without excess heating/cooling 

• Intelligent Room controller: invalid target temperature when using excess heating/cooling in eco mode + Fahrenheit 

• Intelligent Room controller: Single comfort temperature not always converted to Fahrenheit 

• BG-I31581: Shown weather in the app starts at the start of the day instead of current time 

• BG-I31398: Fixed incorrect translation in Mode-dropdowns for Heating/Cooling Controller and AC Central 

• BG-I31686: Old weather entry is shown in the app 

• BG-I31381: Invalid Device type for AC Control Toshiba in device information response 

• BG-I31751: Heating & Cooling Controller / HVAC controller does not calculate average temperature when locked 

• BG-I31771: Intelligent Room Controller: expensive source used even if prioritized less 

• BG-I31628: AC Central Controller is wrongfully shown as cause in AC/IRC History 

• BG-I31719: AC Unit Controller: change on parameter not immediately applied 

Shading 

• BG-I30203: Invalid calculated position when using Nano2Relay 

• BG-I31123: Automatic Shading: Missing history-elements when calculating shading period 

• BG-I31378: Parameters don’t disappear anymore when shading type is changed 

Devices 

• Gentle Mode for Valve Tree only active if user hasn’t manually increased force 

• R20-T287 Dimmer Extension: Refactoring for better ZX Detection and more stable with ripple control signals 

• Relaxed Extension update error system message 

• Dimmer Extension adapted dim curve to older version 

Audio 

• Miniserver Compact Audio is shown as offline after a reboot 

• Compact Audio not shown as rebooting directly after a restart 

• BG-I31060 Setting “Automatic highpass-filter” not shown on Audioplayer when connecting Audioserver-Stereo-Output 

• BG-I31101 Wrong resolved address of Audioserver sent to the App resulting in slow connection process 

• BG-I31587: Permanent OFF of Audio Central not properly forwarded to Music Player 

• Music Player Group + Central Music: Volume command sent when saving into Miniserver 

Diagnostics 

• Modbus Monitor shows device ID 0 when server is offline 

• Select per default the Tree view in the Health Check 

• BG-I31048: No proper error message when air route could not be queried from Miniserver 

Gateway 

• Client shown as offline even if its back online again 

• BG-I31610: Can’t add client to gateway, when https is not working or disabled 

• BG-I31560: File fetch (e.g. def.log) from a client is rather slow 

Energy 

• BG-I31007 Spot Price Optimizer Cv Output is now rounded at 3 decimal places 

• The buffer target temperature offset ‘B’ now will be used as hysteresis 

• If the actual buffer temperature rises above the buffer target temperature (AQf + B) the pump (Qp) will be activated 

• If it falls below the target flow temperature (AQf) the pump will be deactivated again 

• BG-I30937 Wallbox2 Mr output not incremented after Energy Meter Tree wasn’t used anymore and only Cp Input is connected 

• BG-I30929 Energy Manager Output not being correctly displayed as Analog/Digital if Priorities are changed 

• BG-I30989 Load Manager Settings are not updated when operating mode is changed 

• BG-I31394: Wallbox Off input does not reset Cac output 

• BG-I31652: Wallbox2 standby consumption included in next charge 

OCPP 

• BG-I31193: OCPP Charging Session not resumed when charging allowed output of Wallbox was off 

• BG-I31473: OCPP EV Connection Timeout did not disable charging allowed on Wallbox 

• BG-I31472: OCPP local billing would get lost after “remote stop” was used 

• BG-I31197: OCPP Rejected authorization from OCPP when starting charging via App displayed wrong, local billing lost 

• OCPP connection to unsecure OCPP backend via ws:// not possible 

• OCPP Charging point would not connect if Wallbox function block had no Tree devices connected 

• OCPP Charging point would not pass Selfcheck in some cases 

• OCPP Suspended EV/EVSE not sent 

• OCPP Authentication after Miniserver reboot caused multiple authentication requests 

• OCPP Charging Point not displayed as dummy device in some cases 

• BG-I31535: OCPP Chargepoint API Connector does not automatically connect to Wallbox and Authentication NFC Code Touch function block 

• OCPP Meter values: Timestamp of meter value was sent instead of current timestamp which caused problems on OCPP backend 

• OCPP Reset: Charging station model and serial number not properly sent after soft and hard reset 

• OCPP Changing TxUpdateInterval not possible and changes not persistent 

• OCPP Transactions not restarted after power outage in rare cases 

Multiplicator 

• Client Miniserver can be added 

• BG-I31039 Trust search does not work externally 

• BG-I31745: Config crash when editing intercommunication setting 

Trust 

• BG-I31752: When trying to takeover users from Trust Manager, always Manager takeover is preselected 

BACnet 

• BG-I31382: Miniserver does not respond to requests on the devices BACnet port 

Auto Configuration 

• Undo not properly saved before doing Auto Configuration 

Home Connect 

• BG-I31527: Oven can’t be added when it does not support the preheating program 

• Slowed down requests when having a lot of devices, to prevent rate limiting by API 

Project Planning 

• BG-I30973 Master/Client not having a need for power 

• Plugin has high memory usage 

• NCF Authentication: new authorization request sent when another authentication is in progress 

• not all states sent to Plugin after reboot 

New 

• A3D9-T1393: Message Center: showing recent messages with thumbnails and added possibility to delete messages

   

• A3D9-T1320: Exo plugin v1.1.0

  • Send control statistics to Exosphere

  • “onboarding” from Config using provisioning code

• Added Wever & Ducré Light Tree

• A3D9-T1388: Audio Volume Fading

General

• BG-I31375: Message Center view was incorrectly hiding some messages in some situations
• Certificate fetch on Miniserver Gen.1 not retried fast enough
• BG-I31658: Update of internal Audioserver on Miniserver Compact fails
• BG-I31400: Normal Config search can’t find objects with diacritics
• BG-I31667: ‘Delay after start’ setting is not used on Burglar alarm, when before the reboot a sensor was active
• BG-I31757: Io names not displayed depending if category or room is set
• BG-I31761: Miniserver Replace does not properly create a backup anymore
• BG-I25252: New-Device-Bubble in Gateway documents shows wrong or no data
• User management dialog does not have a proper title
• Tooltip in Tree does not always show a text when colour of item is not green
• Selection in User management dialog jumps when a Username gets edited
• Users and Groups in User management dialog not properly sorted
• Dialog does not open centred on the screen
• Connection reference shown as active, when connected to API output
• Error message when saving to Miniserver
• BG-I31707: MIN/MAX Commands not handled in Sequence Controller

Fixed 

Devices

• Dimmer Extension adapted dim curve to older version  

Diagnostics

• BG-I31048: No proper error message when air route could not be queried from Miniserver 

Climate

• BG-I31751: Heating & Cooling Controller / HVAC controller does not calculate average temperature when locked 
• BG-I31771: Intelligent Room Controller: expensive source used even if prioritized less 
• BG-I31628: AC Central Controller is wrongfully shown as cause in AC/IRC History 
• BG-I31719: AC Unit Controller: change on parameter not immediately applied 

Energy

• OCPP Meter values: Timestamp of meter value was sent instead of current timestamp which caused problems on OCPP backend
• OCPP Reset: Charging station model and serial number not properly sent after soft and hard reset
• OCPP Changing TxUpdateInterval not possible and changes not persistent
• OCPP Transactions not restarted after power outage in rare cases

Audio

• Music Player Group + Central Music: Volume command sent when saving into Miniserver

Multiplicator

• BG-I31745: Config crash when editing intercommunication setting

Trust

• BG-I31752: When trying to takeover users from Trust Manager, always Manager takeover is preselected

 

New 

• OCPP 

• • A3D9-T1344: Support for Sending Error Codes to Backend 

• • A3D9-T1339: Support for Reporting Wallbox Model properly 

• • A3D9-T1338: Support for Reporting Serial number and Firmware Version 

• AutoConfiguration 

• • Support for Hunter Douglas 

Fixed 

General 

• BG-I26940: Detailed Device Information for some AIR devices is not working 

• CloudDNS request is now done with HTTPS and in a more general manner 

• BG-I31630: Gate Controller has wrong options for type 

• BG-I31631: IRC is shown as unconfigured in project analysis when only AC Controllers are connected 

• BG-I31632: AC Central Controller is shown as an error in project analysis 

• BG-I31586: Automatic Designer: missing translations for Heating and Cooling Controller 

• BG-I31471: App Search tree: keep search results after automatic end of search 

• Miniserver configuration dialog shows wrong current address, when connected externally 

• BG-I31345: Certain values can’t be set via expert mode on some settings 

• BG-I31507: IR sensors can’t be controlled via LiveView 

• BG-I31346: System schematic has a visualization password setting 

• BG-I31523: NFC Tag not exporting when exporting users (only first tag will be exported) 

• Single click on text ‘Edit…’ in property window does not open the edit dialog 

• BG-I31399: Hörmann Air: Invalid visibility of travel duration parameters 

• BG-I31595: Config locks up when dragging a constant to a parameter 

• BG-I31599: Connecting from Miniserver Keychain does not use project data when internal and external address is empty 

Shading 

• BG-I31123: Automatic Shading: Missing history-elements when calculating shading period 

• BG-I31378: Parameters don’t disappear anymore when shading type is changed 

Stability 

• BG-I29486: Increased stability of Loxone Config when saving large project files 

• BG-I31626: Config crash when opening project 

• BG-I31705: Miniserver reboot when receiving text memory changes from another Miniserver 

Lighting 

• BG-I31569: Light controller displays no states after disconnecting output 

• Fixed Miniserver crash when DALI Broadcast Actor is used 

• Fixed DALI Min/Max brightness settings for Smart Actuators 

Climate 

• Intelligent Room controller: Single comfort temperature not always converted to fahrenheit 

• BG-I31581: Shown weather in the app starts at the start of the day instead of current time 

• BG-I31398: Fixed incorrect translation in Mode-dropdowns for Heating/Cooling Controller and AC Central 

• BG-I31686: Old weather entry is shown in the app 

• BG-I31381: Invalid Device type for AC Control Toshiba in device information response 

BACnet 

• BG-I31382: Miniserver does not respond to requests on the devices BACnet port 

Audio 

• BG-I31587: Permanent OFF of Audio Central not properly forwarded to Music Player 

Auto Configuration 

• Undo not properly saved before doing Auto Configuration 

Gateway 

• BG-I31610: Can’t add client to gateway, when https is not working or disabled 

• BG-I31560: File fetch (e.g. def.log) from a Client is rather slow 

OCPP 

• BG-I31193: OCPP Charging Session not resumed when charging allowed output of Wallbox was off 

• BG-I31473: OCPP EV Connection Timeout did not disable charging allowed on Wallbox 

• BG-I31472: OCPP local billing would get lost after “remote stop” was used 

• BG-I31197: OCPP Rejected authorization from OCPP when starting charging via App displayed wrong, local billing lost 

• OCPP connection to unsecure OCPP backend via ws:// not possible 

• OCPP Charging point would not connect if Wallbox function block had no Tree devices connected 

• OCPP Charging point would not pass Selfcheck in some cases 

• OCPP Suspended EV/EVSE not sent 

• OCPP Authentication after Miniserver reboot caused multiple authentication requests 

• OCPP Charging Point not displayed as dummy device in some cases 

• BG-I31535: OCPP Chargepoint API Connector does not automatically connect to Wallbox and Authentication NFC Code Touch function block 

Energy 

• BG-I31394: Wallbox Off input does not reset Cac output 

Home Connect 

• BG-I31527: Oven can’t be added when it does not support the preheating program 

• Slowed down requests when having a lot of devices, to prevent rate limiting by API 

New 

• A3D9-T1330 Hunter Douglas Power View 3 Support 

• • Supports Hunter Douglas Gen. 2 and Gen. 3 

• • New Analog Output TPos (0..100) for Shading Block 

• A3D9-T1347: Ac Unit Controller: Added History 

• DALI Extension: DALI2 support for DALI Extension with HW Id 4 

• A3D9-T1337 OCPP Support for Remote Start/Stop Transactions 

• A3D9-T1371 Setting icon for objects in periphery tree is now displayed instead of normal icon for better accessibility 

• A3D9-T1250: Garage/Gate Central: Added “Partially Open” Input 

• A3D9-T1336: Audioplayer: Added Bluetooth pairing output 

• A3D9-T1335: Parameters can now be added as a Combo Box 

• A3D9-T1335: Changed Parameters to Combo boxes in some blocks 

• Gate controller Severity of system messages set to important so that a push will be sent 

• Valve Actuator Tree: new default operation mode: “gentle mode” 

• • If activated, the valve actuator moves to 5% instead of 0% to reduce wear, with every 20th command it will still move to 0% to prevent drift. 

• • Disabling this mode reverts the actuator to its original behaviour, where 0% commands result in 0% movement. 

• BG-I30796 NFC Code Touch Block: Deleting all entries is now possible 

• BG-I30795 NFC Code Touch Block: CSV Template now uses the time formats of system locale 

• Planning: 

• • Added new NFC Smart Cards 

• Added context menu to Health Check to select items in periphery tree 

 

Fixed 

General 

• Cloud Services are reported as inactive when request fails 

• Auto connect to Miniserver does not use addresses from project 

• BG-I31336 Virtual HTTP input cant be fetched in config when using only a username and no password 

• Settings of Alarm Siren Tamper input not correctly set for new devices 

• Import of User cant parse NFC tag when it contains quotes 

• Connection to Miniserver fails and no message is generated 

• Analog Sensor not directly displayed as offline anymore after a Miniserver restart 

• RC Key view dialog setting suggests editing 

• Miele token timeouts resulting in a re-login 

• NFC Codes stop working when updating from an older version 

• BG-I31023 OCPP Wrong formatting in Description of server address setting 

• BG-I30924: Fixed Config crash when creating Belimo Devices 

• BG-I25014: Missing/invalid entries in Belimo Monitor 

• BG-I31367 Gusts of weather service not working on client/gateway 

• BG-I31350 Add of Miniserver to a Gateway does not preselect an external address 

• BG-I27375 RS485 call command 

• BG-I25234 RS485 does not receive more than 512 characters 

• Row in Generic View (e.g. Miniserver search) shown as selected but not actually selected 

• BG-I31297 Periphery tree jumps when editing an item 

• BG-I31339 All Plugin actors (e.g. HomeConnect) are set on a reboot instead of only the used ones 

• BG-I30868: Expert Mode: Users with direct access to control can’t select all available rooms 

• BG-I31149: Permission Dialog shows wrong data after changing room of control 

• BG-I30896: Automatic-Designer conditions for NFC-text outputs only triggered once 

• BG-I30928: Energy Meter Tree: Add sensor-information to tree monitor 

• BG-I31025 Virtual Input stayed red after changing Min/Max 

• BG-I31142 Central Controls: ‘Off’ in combination with DisPc permanently blocks configured controls 

• BG-I31196 Invalid or missing options for AC Unit Controller in automatic designer 

• BG-I31144 Equal block ON because of rounding error 

• BG-I30969 Too long control commands to a client may file (e.g. editing schedule block which is on a client) 

• Older version cant be installed over newer version of Loxone Config 

• BG-I20283 Online status not monitored system message gets shown 

• BG-I30784 Monoflop getting stuck on On 

• BG-I30815 New documents don’t have country set, resulting in wrong preselected air channels 

• BG-I31100 Selection gets lost, when pasting multiple controls 

• BG-I31036 fixed slightly mismatching font-size between App and Config in system schematic 

• BG-I30976 ensuring that HTML entities are encoded to Unicode for display in MessageCenter 

• BG-I31037 System Schematics: fixed handling for moving of items and scrolling of view by keyboard 

• BG-I30382 Login with Loxone account in Config wasn’t possible if username/password contained ‘+’ sign 

• A3D9-T1331 Improved some bugs with the auto positioning 

• BG-I30786 Window Block not closing if Weather Protection input is on and miniserver restarts 

• BG-I30854 Fetch of backup file list from devices fails occasionally 

• Connection to Miniserver cant be established sometimes when connecting out of keychain 

• Invalid Jsons when values are invalid 

• Cloud Mailer continues to send emails despite quota already reached 

• OCPP 

• • Plugin has high memory usage 

• • NCF Authentication: new authorization request sent when another authentication is in progress 

• • Wallbox: not all states sent to Plugin after reboot 

Lighting 

• BG-I30183: DALI single actuator (not group) min dim level does not work as described 

• BG-I29018: DALI 8 fade rate jump not working with daylight control 

• BG-I28842: Dali lamp -> Online in the periphery tree Offline in the device status 

• BG-I28606: Device Status Dali Devices shown as offline 

• BG-I27520: Periphery Tree Dali Device shown with red dot 

• BG-I25345: Human Centric Lighting Dali DT8 parameter Ft causes last manual change to get stuck 

• BG-I25237: Dali offline device replace function 

• BG-I30304: DALI groups not working on firmware 15.0.3.25 

• BG-I29042: Dali Air does not send all commands 

Planning 

• BG-I31275 Wrong Master/Client count calculated 

• BG-I31055 Energy Meter type for Wallbox Meter incorrect 

• BG-I31191 Power usage of extensions does not match datasheets 

• BG-I31251 Stereo Extension has a colour setting 

Stability 

• BG-I31377 Auto Save of project may interrupt opened dialogs 

• BG-I31477 Config crash when opening Backup/Update dialog 

• BG-I31391 Config crash 

• Config crash when loading Touch Pure Flex configuration 

• BG-I31360 Config crash when opening project 

• Config crash when connecting to Miniserver via search 

• Config crash when loading from Multiplicator Miniserver 

• BG-I31099 Miniserver reboot when Dali group actor changes 

• BG-I31099 Miniserver reboot when Dali group actor changes 

• BG-I31056 Config crash when opening Multiplicator file with a deleted climate block 

Climate 

• AC Unit Controller Silent Mode overrides manual timer 

• AC Unit Controller timer not properly remanent 

• BG-I31459 Weatherserver does not have data anymore of previous hours (needed for weather data with absolute hour set) 

• Learning per default disabled on IRC but room presets overwrite that preset 

• BG-I31019 Flow Temperature Calculator not having a hysteresis for calculation with buffer temperature 

• BG-I31223 Ac Control: do not cancel timers when ending silent mode 

• BG-I31057 Fixed race condition in copying IRC data 

• BG-I31198 Intelligent Room controller: allowed Range for Input ϑExc not documented 

• BG-I31170 Mixing Valve Controller: improved description of Error-Output 

• AC Unit controller now has a settings-state for the app, which enables the app to faster display the settings page 

• AC Unit Controller: Silent Mode not working when set to Off and AC is controlled by IRC 

• Text in IRC dialog cut off 

• IRC is blinking when dragging an AC Control Air onto the page 

• BG-I31312: Remove cyclic mode message to device 

• BG-I31266: AC Control does not update IRC-Data after lock 

• BG-I31369: Hvac controller triggers prepare phase without excess heating/cooling 

• Intelligent Room controller: invalid target temperature when using excess heating/cooling in eco mode + Fahrenheit 

Shading 

• BG-I30203: Invalid calculated position when using Nano2Relay 

Devices 

• Gentle Mode for Valve Tree only active if user hasn’t manually increased force 

• R20-T287 Dimmer Extension: Refactoring for better ZX Detection and more stable with ripple control signals 

• Relaxed Extension update error system message 

Audio 

• Miniserver Compact Audio is shown as offline after a reboot 

• Compact Audio not shown as rebooting directly after a restart 

• BG-I31060 Setting “Automatic highpass-filter” not shown on Audioplayer when connecting Audioserver-Stereo-Output 

• BG-I31101 Wrong resolved address of Audioserver sent to the App resulting in slow connection process 

Diagnostics 

• Modbus Monitor shows device ID 0 when server is offline 

• Select per default the Tree view in the Health Check 

Gateway 

• Client shown as offline even if its back online again 

Energy 

• BG-I31007 Spot Price Optimizer Cv Output is now rounded at 3 decimal places 

• The buffer target temperature offset ‘B’ now will be used as hysteresis 

• If the actual buffer temperature rises above the buffer target temperature (AQf + B) the pump (Qp) will be activated 

• If it falls below the target flow temperature (AQf) the pump will be deactivated again 

• BG-I30937 Wallbox2 Mr output not incremented after Energy Meter Tree wasn’t used anymore and only Cp Input is connected 

• BG-I30929 Energy Manager Output not being correctly displayed as Analog/Digital if Priorities are changed 

• BG-I30989 Load Manager Settings are not updated when operating mode is changed 

Multiplicator 

• Client Miniserver can be added 

• BG-I31039 Trust search does not work externally 

Project Planning 

• BG-I30973 Master/Client not having a need for power 

• Plugin has high memory usage 

• NCF Authentication: new authorization request sent when another authentication is in progress 

• not all states sent to Plugin after reboot 

Fixed 

• BG-I31056 Config crash when opening Multiplicator file with a deleted climate block
• BG-I31099 Miniserver reboot when dali group actor changes
• AC Unit Controller: Silent Mode not working when set to Off and AC is controlled by IRC
• BG-I31101 Wrong resolved address of Audioserver sent to the App resulting in slow connection process
• BG-I31223 Ac Control: do not cancel timers when ending silent mode
• BG-I31057 Racecondition in copying IRC data causing Config crash

New 

• OCCP Server Connector (Beta) 

• Connect your Wallbox to a OCPP Server 

• OCPP 1.6 & 2.0.1 supported 

• A3D9-T1310 Climate Controller new visualization 

• API has been changed to match the API of the HVAC Controller 

• A3D9-T1307 System variable for Expected Average Outdoor Temperature 

• A3D9-T1301 Intelligent Room controller: Adapted handling of excess heating or cooling 

• A3D9-T1302 AC Heating and Cooling Controller 

• A3D9-T1303 AC Control Integration in Intelligent Room Controller 

• Climate Controller: Possibility to use the outdoor temperature forecast instead of the past average 

• HVAC Controller: Use of outdoor temperature can be changed (Average past or future 48h) 

• Permission Selection Dialog: Automatically filter for objects used in visualization 

• A3D9-T1316 Output Txlt of Door and Window Monitor now displays the same text as the visualization 

• A3D9-T511 Added time function which gives the current week of the year 

• A3D9-T1304 Energy Meter Tree is now configured to be a bidirectional meter by default 

• AC Control: Output “Am”: Automatic mode is active 

• A3D9-T1226 added usage references to operation mode tree entries 

• Renaming of some Climate Blocks: 

• Climate Controller -> Heating and Cooling Controller 

• Intelligent Temperature Controller -> Flow Temperature Calculator 

Fixed 

General 

• BG-I30908 User Enabled From/Until timestamp can’t be set to midnight 

• BG-I30729 Printing to A1 paper size not working 

• Updated EEBUS Documentation (2.0.0) 

• System Schematic Dialog: fixed mishandling of visualization item selection 

• Operating mode references in document tree could be edited 

• BG-I30404 LiveView didn’t show corrected values for some analogue-out types 

• BG-I30850 client speaker search dialog didn’t show room and installation place of the searching device 

• BG-I30782 Modbus devices lost room when saving in MS 

• Air router functionality can be switched off for DALI Air devices 

• BG-I30553 Sequential Controller: Variables missing in remanence 

• Value Validator: remanence not restored 

• BG-I30576 Sequence Controller: add support for Automatic Designer 

• BG-I30575 Climate Controller dialog does not have table settings 

• BG-I30686 Air Valve: No proper unit set for output 

• BG-I30779 Intercom Search not possible when link is not used 

• BG-I30693 Modbus TCP analogue actuator now also executes his command on restart when nothing is connected 

• BG-I30717 fixed wrong text for end-search button in Intercommunication learn dialog 

• BG-I30703 prev/next buttons in MessageCenter detail view now follow the same ordering like in the overview table 

• BG-I30808 Opening context menu of multiple controls not working 

• BG-I23395 Modbus Actor gets stuck and does not change anymore 

• BG-I30830 Air device limit not correct when learning via dialog 

• Power Supply & Backup: Online status Monitoring can’t be disabled 

 

Devices & Extensions 

• AC Control 

• BG-I29991 Fixed leaving pairing mode 

• BG-I29465 Removed cyclic Messages “Power: Ein, Fehler: Aus” 

• Dali Air 

• Fading time from the DALI Air Broadcast actor is not working when Standard actor is configured 

 

Audio 

• BG-I30756 Subwoofer not being recognized as master device 

 

Climate 

• BG-I30843 Intelligent Room Controller: changed allowed deviation in single comfort temperature mode to 1.5° 

• Energy Management inputs of climate controllers hidden per default 

 

Multiplicator 

• Connect dialog does not use full remote address 

• BG-I30840 Reset of control does not work when it uses a control preset which is modified 

• Changes are not loaded from Miniserver when its currently not in the reachable state 

• Miniserver dialog now shows the version of the changes 

 

 

Project Planning 

• Childs of object created without a room, resulting in an error message when starting auto configuration 

 

Stability 

• BG-I30739 Config crash when starting Air diagnostics 

• Config crash when trying to learn more than 128 Air devices 

• Config crash when learning air device 

• BG-I30716 Config crash when deleting automatic rule 

• BG-I30826 Config crash after pasting controls 

• BG-I30906 Config crash when creating a connection from the Authentication function block 

• BG-I30897 Config crash when creating HVAC controller 

 

New 

• A3D9-T990 System Schematics: extended functionality 

• Support for text-only objects 

• Possibility of fixed sized objects 

• A3D9-T1282 Climate Controls: draw connection references for used energy sources 

• A3D9-T1269 New Control: Binary Encoder 

• A3D9-T1225 New Control: Dewpoint Calculator 

• A3D9-T1223 New Control: Value Validation 

• Intelligent Roomcontroller: 

• A3D9-T1279 Add IO’s for CO2 & Humidity 

• A3D9-T1280 Add Boost-output 

• A3D9-T1281 New output “Os” for current temperature mode (Comfort, Eco, …) 

• A3D9-T1277 Configurable single target temperature instead of separated heat/cool temperature 

• Spot Price Optimizer: 

• Support for UK 30-minute epex market 

• Minutes since midnight for which the price is calculated now available in formula 

• AC Control 

• A3D9-T1299 Added silent mode input 

• A3D9-T1300 Added options to set power on values for Fan speed, airflow-direction and target temperature which are set when switching off 

• Wallbox: 

• A3D9-T1306 Added output Ssp session started pulse 

• BG-I29188 Touch Pure Flex Air+Tree: Added possibility to disable acoustic feedback 

• A3D9-T1305 Added possibility to easily set log level on plugins 

• Same as for Miniserver: select plugin in document tree and open Debug Monitor Settings dialog from Diagnostics tab 

• Currently only Exosphere Plugin is supported, other Plugins will follow in the future once they are updated 

• A3D9-T1208 Added Min/Max functionality to formula block 

• A3D9-T1270 Added the opportunity to paste lines and/or columns from another spreadsheet into a generic table and to copy a whole line with a context menu in the vertical header 

• BG-I30578 Added gold variants of some products 

• A3D9-T1227 Added Intercommunication Monitor (LAN & Tree intercommunication) 

• Project Planning 

• A3D9-T1268 Added DMX devices 

• A3D9-T1191 Added Option to plan Line Ins 

• A3D9-T1286 Audio Central & Group Fix: Cs input 

• Binary Decoder 

• Values > 255 handled incorrectly (always all outputs enabled instead of relevant bits) 

• Now supports up to 32-bit values 

Fixed 

General 

• BG-I30695 Custom System Message: Email notification is not always sent if severity is important or critical 

• Connect to Miniserver fails when username or password contains special characters 

• BG-I30672 Copying between projects does not recover central references 

• BG-I30571 Function blocks not selected when being right clicking 

• BG-I30558 Room and Category “do not use” set to not assigned when controls are copy pasted 

• BG-I30532 Plugin IOs can’t be used accross Miniservers in a Client/Gateway system 

• BG-I30334 API echo commands don’t work in all cases, depending on SPS order 

• BG-I30664 Miniserver shortcut shown as not fully configured 

• BG-I30605 AC Control has the wrong type set internally 

• BG-I30671 Blinds not closing or opening completely when type is set to roller blinds 

• BG-I30577 Added room and category in tooltip for central controlled blocks 

• BG-I30572 Adjusted the delay when filtering in a generic view table and when a button is clicked the correspondent row is selected 

• fixed incorrect column filter (for encrypted column) in Intercommunication monitor and learn-dialog 

• BG-I27855 Setting a timespan for a user in Loxone Config across a daylight savings change sets wrong time 

• Updated Table Lamp icon 

• BG-I30593 Gateway/Client: Event registrations get lost causing unexpected behaviour in e.g. central blocks 

• EEBUS: 

• Names cannot be discovered on devices with new EEBUS configuration 

• Added system message when EEBUS configuration changes and inputs can’t be subscribed anymore 

• Plugin communication sped up 

• BG-I30546 Fixed processing of text in sequence controller 

• Table Lamp Air: Confusing names for Smart Actuators  

• App Learning: Online status input does not have a name 

• BG-I30254 fixed invalid view state in many Config tableviews when opening ComboBoxes consecutively 

• BG-I24181 Miniserver and Miniserver Compact: Relays switching temporarily off when doing an update in some cases 

• Manual Connect to Miniserver fails when username or password contains special characters 

• BG-I30411 Energy Manager digital outputs can’t be inverted 

• BG-I30352 Lines of connection references show wrong colour 

• Miniserver closes websocket connection not correctly when user is blocked 

• BG-I30406 KNX actors overridden via LiveView not reset when LiveView is stopped 

• A3D9-T1147 Fixed difference of tooltip of connectors(directly on connector vs. in connection window) 

• R20-T293 Ceiling Light Tree: Added interaction counter in learn dialog 

• BG-I30347 Audio Device Search: devices cannot be replaced when maximum number of devices is reached 

• Expert Mode cannot be loaded if user has no permitted rooms 

• Link Diagnosis: no proper uptime directly after learning in device 

 

Devices & Extensions 

• BG-I27154 Tree Extension: LED state of Extension wrong after switching MS Compact Link to Tree 

• BG-I25077 RGBW Dimmer Air 

• Added follow up binary for status LED, fixed turning off/on of LED stripe when saving into MS 

• Table Lamp Air 

• BG-I29919 offline status led color 

• BG-I30620 touch/usb loader communication error 

• BG-I30622 battery status not matching led status ring 

• XAL Light Air 

• Motion detection after power on 

• Nano IO 

• Improved air communication handling (BG-I26173) 

• Touch Air V2 

• Improved communication handling, improved temperature sensor handling (BG-I30642) 

• Touch Pure Flex Air 

• BG-I29641, BG-I28232 improvements to touch in battery mode 

 

Audio 

• BG-I30424 Audioserver: invalid config json when using line-out on Audioplayer-Subwoofer-output 

 

Lighting 

• BG-I30598 Lightcontroller: Off via API command is handled like a command from app and does not trigger reset output 

 

Climate 

• Intelligent Roomcontroller:  

• A3D9-T1295 Reduced movement-time for Valve-standstill (Vs) to 10 seconds 

• A3D9-T1296 Reduced number of valve-adaptions when using climate controller 

• BG-I30325 Building protection switched off after reboot while input is active 

• BG-I30455 Building protection activated in manual heating mode 

• BG-I30378 Ventilation Block: intensity and alert message (reason) don’t match 

• BG-I30418 Solar Controller wrong tank is selected when pump is already running 

 

Shading 

• BG-I30283 Automatic Shading: Sp goes On while the block is locked 

 

Energy 

• BG-I30264 Power Supply & Backup: Outputs go to 0 during device startup 

• BG-I30402 Energy Meter Single phase + N: Name cannot be changed 

• BG-I30288 Energy Flow Monitor: Statistic interval of rest node can not be changed, the interval of the efm will now be used 

• BG-I30395 Wallbox Manager: charging would not start when minimum charging limit was set to 0 on Wallbox 

• BG-I30226 Wallbox devices were missing in Modbus Monitor filter selection 

•  

 

Trust 

 

Multiplicator 

 

Project Planning 

• BG-I28947 Updated tax rate of CHF to 8.1% (new tax rate since 01.01.2024) and fixed display of tax percentage (removed rounding) 

 

Stability 

• Config crash when inserting Smoke Detector Air 

• Config crash when loading defective program from Miniserver 

• BG-I30714 Config crash when restoring control presets of light controller 

• BG-I30670 Config crash while learning IR commands 

 

 

New 

• A3D9-T1275 added system variable for highest active system status severity 
• BG-I27513 Managed Tablets: Disable monitoring of battery level 
• BG-I30332 Project Planning: PWM Channels for different rooms now share channels on RGBW Dimmers when using Tree RGBW Dimmer 

• • When using Compact or Air RGBW dimmers each room will still get an individual dimmer 

• A3D9-T1245 Added support for weather/hazard warnings to weather server data 
• BG-I25077 RGBW Dimmer Air: Allow disable of LED on RGBW Dimmer Air 
• R20-T293 Presence Sensor Tree, Motion Sensor Tree, Room Sensor Tree: new blinking pattern (no blinking when learned in) 
• A3D9-T1174 Full System Backup 

• • System Backup now incorporates backups from all eligible devices 
  • Backup Dialogs in Config will now perform System Backup by default 
  • Exo Backup: will now perform System Backup 

• A3D9-T1253 added Command Recognition dialog (as used for HTTP VirtualIn) to Command Recognition block 
• EEBUS: Support for new Vaillant Firmware versions 

Fixed 

General 

• BG-I30335 M-Bus device primary address not visible 

• BG-I30279 Gate Controller: invalid state after reboot 
• Control History shows room not assigned 
• BG-I29807 Backup Window: Displayed date too short 
• BG-I30265 Status Monitor: Some texts not translatable 
• BG-I30295 System Variable Outside Temperature does not have full unit 
• BG-I29793 Intercom displayed offline when there is a Tree to Air Bridge on the Tree 
• BG-I30266 Missing translations in Monitor windows 
• IN1-I960 Tree device at Intercom Tree shown offline 
• BG-I30299 Tree Extension is not displayed in search result after saving to Miniserver 
• Adapted default polling cycle for 1-Wire and sample time of Mixing Valve Controller 
• Extension Learn Dialog: Always same Air channel is used for extensions 
• BG-I30215 Miniserver shortcut not shown as unconfigured when trust member gets deleted 
• Debug Monitor: Added CPU temperature (Supported for Miniserver Gen.2) 
• Air: Command is sent to wrong device after a device has been unpaired 
• BG-I30236 Learning Dialog: Identify learned device not sent after opening dialog with only one learned device 

• BG-I29918 NFC Learn Dialog: User description was used in combo box selection instead of username 
• BG-I29975 Project Validation: Wrong warning ‘Missing Object Connection’ when Hörmann Air is connected via API Connector 
• BG-I28836 DNS caching of loxonecloud.com addresses 
• Weather data not changed at the full hour 
• Network Device search: Result can’t be added when there is a different device with the same IP 
• BG-I30116 Users representing controls can be selected as user for plugins 
• BG-I29924 Gateway/Client: Actors can’t be switched due to broken programs 
• Disabled TLS renegotiations for TLSv1.2 and earlier 
• BG-I29734 Virtual Output: Test command with redirects not working properly 
• BG-I29867 HealthCheck Miniserver: check reachability of certificate server 
• BG-I30115 Part list shows music extension instead of speakers 
• BG-I30189 Access schedule empty after creating 
• BG-I29896 Fixed replacing Air-Devices via app 
• BG-I29053 Miniserver Compact: Update Samba to version 4.19.5 XSS validation for settings not working when injection is on first letter 
• BG-I29942 SD Format Dialog: Wrong error message when formatting SD card for Miniserver compact and there is a newer firmware available 
• BG-I28123 Home Connect: Slowed down initial requests to prevent rate limiting by API 
• BG-I29913 New Users can’t see any system status messages 

• BG-I29972 NFC Access doesn’t show proper name of Managed Tablet in history 
• BG-I30014 Virtual Input changes to analogue when connected to lighting controller 
• BG-I30037 Object (e.g. Virtual Input) does not get first free name since there is an input reference with the same name 
• Network Device Learning: No port appended, when hostname cannot be resolved, and device is replaced 
• BG-I29057 Window: Protection not executed when using Input TPos 
• BG-I29977 Xal Light Air: incorrect reference name 
• BG-I29745 User Management: Keycodes not applied on gateway-client 
• Updated Matter Plugin (0.4.0) with Matter SDK 1.3 
• BG-I29916 Modbus Monitor: Datatype for analogue sensor/actuator is empty 
• BG-I28312 No data on Modbus counter connected to Wallbox tree 
• BG-I29854 Statistic Dialog: Panning not working properly 
• BG-I29822 Auto Configuration: Audio not available in some cases 
• BG-I29863 Miniserver Gen.2 reuses old DNS resolves in some cases 
• BG-I29573 Auto Update can’t be downloaded 
• NFC does not stop learn mode if no stop command is received from app 

Devices & Extensions 

• Smoke Detector Air 

• • BG-I29917 Missing Alive Packets 
  • BG-I28426 going offline regularly 
  • BG-I24136 Low battery warning too late 

• AC Control Air 

• • AS1-T265 supports new Gree Protocol 
  • BG-I25269 Air/Spi Watchdog Resets fixed 
  • AS1-T310 enable new vane positions 1-5 for Gree 

• Nano Dimmer Air 

• • BG-I8681 implemented check of zero crossing in self-test 
  • Touch module: touch timeout increased to 15 minutes 

• RGBW Dimmer Air  

• • BG-I24397 Calculation of colour temperature and brightness is now linear. Brightness is more consistent 

• Touch Air 

• • Increased touch timeout to 15 minutes 
  • BG-I28671 Increased power consumption because of false wakeups 

• Window Handle Air 

• • BG-I29901 High Standby Current 

• Presence Sensor Tree 

• • BG-I29133 Always reports movement after power on reset

Audio 

• BG-I29893 Music Server: Doorbell event from Door controller not forwarded to Music Zone 
• BG-I29999 Music Server: Audio output disappears after separating the stereo outputs 
• Music Server: Group-Options not sent 
• BG-I29900 Audioserver does not know set unit for temperature 
• BG-I30162 Central Music: History Entries on Player not consistent when using multiple Audioservers 
• A3D9-T1188 Audioserver min version system message was triggered incorrectly for Audioservers on older, yet unsupported versions 
• Audio Player: Don’t trigger play of custom sound when text is empty 

Climate 

• BG-I30004 Intelligent Room controller: Excess Heating from Climate Controller applied in cooling mode 

Shading 

• BG-I29190 Automatic Jalousie: incorrect positions after move commands 

• • Invalid deadtimes used after small adjustments with Up/Dw 
  • Dead times not properly calculated to actual positions 
  • Invalid calculated position when using shade command 

• BG-I29872 Roof Window Shading: Active automatic not ended with window or protection 
• BG-I30293 Shading Block do a full drive with Po or Pc 

Energy 

• BG-I30211 Wallbox: output Cp not set when Energy Meter Tree is connected via API Connector in some cases 
• Energy Manager: Does not show as unconfigured when Grid power is not connected 
• Wallbox Manager: Strand power not correctly reduced when Wallbox is activated 

Trust 

• BG-I30087 Trust User Transfer fails when user has the same name as a user representing a control 
• Trust error message when serial of Miniserver is changed always shows hint for member and for manager 
• Additional descriptions for Trust settings 

Multiplicator 

• Don’t save Multiplicator Password when saving project 
• BG-I30336 Multiplicator: Miniserver version downgrade possible 
• BG-I30234 Multiplicator: Config locks up when resetting object to Multiplicator default 

Project Planning 

• BG-I29881 PWM Spot created as Smart Actuator 
• BG-I29889 Lightgroups not created with proper name 
• BG-I29857 Added AC control Sinclair (100587) 
• BG-I29985 Error message when adding Install Sub 10 Clients 
• BG-I30019 Some countries have wrong audio preselection 
• Weather Station is set as source for sunshine system variable 

Stability 

• Config crash when loading broken file from Miniserver 
• BG-I29440 Random Config crashes due to windows ui automation 
• BG-I29974 Config crash when editing rooms/categories while loading from Miniserver 
• Miniserver reboot when config is disconnected 
• Miniserver reboot when saving remanence of energy meter 
• BG-I30043 Miniserver reboot when having an unreferenced Audio Player with logic connected 
• BG-I30239 Config crash when inserting Belimo device 
• BG-I30276 Config crash when deleting devices while air diagnosis is opened

Fixed

General 

• BG-I29738 HTTP Virtual Input Command Recognition dialog failed when URL contained escaped slashes 
• BG-I29763 Audio Server HealthCheck: improved readability of results 
• BG-I29733 Message center: links in messages couldn’t be opened in all cases 
• Exosphere: workaround for automatic logout from Exosphere (until server issue is fixed) 
• BG-I29761 added word wrap of text labels in Audio Server HealthCheck 
• BG-I29723 Actively communicating Tree-Extension shown as offline 
• BG-I29633 Status: Wrong result when text conditions were used with only analogue input connected 
• BG-I29642 Modbus: Sensor Limit for Modbus Extension not correctly calculated 
• BG-I29639 System Status: Not all system messages hidden when “Hide System status messages” was enabled 
• BG-I29305 Window Monitor: Linked objects with tracker generate tracker entries frequently 
• BG-I29039 Shading: could not be unlocked via App in some instances 
• BG-I28900 EnOcean: Config data not sent to Extension when learned in on Compact internal Link 
• BG-I27244 Showing errors Devices Offline 
• BG-I29798 App Branding can’t be retrieved from the Miniserver without authentication 
• Authentication NFC Code Touch did not display connector texts 
• Installation Place of Extensions not displayed in tree 
• Valve Actuator: Tree does not update when changing switchboard position 

• BG-I19412 SMTP Mailer: invalid order of header-elements when adding attachments 
• BG-I29790 Schedule analogue: Settings only available for schedule digital should be hidden 
• BG-I29671 Operating Time with easter-reference handled incorrectly in simulation 
• App Learning: replaced speaker shown as offline 
• BG-I29821 App Learning: Add Hardware Type to webservices 
• BG-I29824 Parts list: Products with different Variants (AC-Control, Energy-Meter, …) shown as single position 
• BG-I29853 Dali Air: Device not added when group caption is selected 
• BG-I29862 Mounting location sequence Stereo Extension 

Devices & Extensions 

• Air Base Extension 

• • RDC for new Air transceiver 

• Tree to Air Bridge 

• • RDC for new Air transceiver 

• Dali Air  

• • BG-I29042 does not send all commands 

Lighting 

• BG-I29702 Lighting Controller: wrong behaviour when “Met” controlled over a Virtual Input 
• BG-I29698 Lighting Controller: Mood “All On” not properly unmixed after presence  

Audio 

• BG-I29804 Audio Player still showing as unconfigured even when serials to devices have been entered 
• Audio Player: Source Change via T5 not shown in history 

Climate 

• BG-I29648 Intelligent Temperature Controller: Not activated when climate controller is in service mode 
• BG-I29749 Ventilation control cooling support not activated 

Energy 

• BG-I29792 Energy Meter Tree: Show System message if invalid direction is detected (1 Phase Meter) 
• Spot Price Optimizer per default automatically delete statistics 

Stability 

• Fixed Miniserver Gen1 crash when DALI Extension with firmware 15000325 is used 
• BG-I29856 Config crash when receiving Monitor data 
• BG-I29757 Config crash when configuring device 
• Miniserver reboot when reporting tree shortcut 
• Config crash when deleting Music Zone 

Fixed

General 

• BG-I29632 Tree diagnostics skipped when Tree2Air was the only device on the tree branch 
• Virtual Text Input can’t be inserted on another Miniserver 

Devices & Extensions 

• Analog Out Extension:  

• BG-I17291 Sporadic change of output range 

Audio 

• A3D9-T1193: Music Player Group Fix: Add Setting “Radio favorite as default”. Removed setting for grouped Music Players 

Trust 

• Added retry when update of usermanagement data fails 

Stability 

• Config crash during Link Health Check 
• BG-I29645 Config crash when learning tree device 

New 

• Health Check for Audio 
• BG-I13568: RGBW Dimmer Tree is now able to be added to a lightgroup 

Fixed 

General 

• BG-I29619 Connect to new Miniserver preselects wrong address 
• BG-I29308 Miniserver thinks that Air device is asleep after keeping it awake via Device Status in some cases 
• BG-I29117 Config Auto Connect: uses external connection instead of internal in some cases 
• Display of device Tree View in HealthCheck dialog 

Devices & Extensions 

• RGBW Dimmer Tree:  

• BG-I24397 Calculation of colour temperature and brightness values has been changed to a linear approach 
• BG-I18960 Firmware has been adapted, that the initial output state of the LED pins is disabled  

Climate 

• BG-I29557 Locked Intelligent Room controller activates Climate Controller on Startup 
• BG-I29121 Intelligent Room Controller changing to fix target value causes invert of actual mode 

Lighting 

• BG-I28860 Lightcontroller: incomplete history-entries created by central-block

Gateway/Client 

• BG-I28623 Gate Central can’t control gates on a client when it’s also used in door and window monitor

Stability 

• BG-I29604 Miniserver Gen.1 Watchdog reboots when having a lot of systemstatus entries as a client 

New 

• BG-T3288 Autoconfig: Energy Improvements
  • New Comfort Function for Energy Flow Monitor
    • Creates Energy Flow Monitor
  • Meters are added
  • Grid Meter is set to ‘Grid’
  • Wallbox meters are added
  • Power Supply & Backups are added
• Version 15 Splash Screen
• Added button for manual connect to ribbon connect submenu
• Dali Extension DALI2 support 

• • Only for certified Extensions 

• BG-T3186 Audio Player: Control History 
• A3D9-T1193 Audio Player: Setting “Room favourite priority” 

• • If checked the Audio Player always starts with the first favourite 

• Multiplicator: Allow reset changes of a setting on all managed Miniserver with one action within edit dialog in Multiplicator project 
• A3D9-T1110: NFC Code Touch authentication method parameter 

• • The authentication method can be changed through this parameter via logic 

• Ventilation: Use a PI controller for CO2 control 

• • Parameters depending on room size 

Fixed 

General 

• Exosphere
  • plugin can now also be added manually in Config
  • BG-I28300 fixed expiring login in Config (please relogin manually to take effect, if not you will automatically be logged out again after 7 days latest)
  • Not all Events sent
• BG-I29266 AirDiagnostics: fixed wrong webservice call for Tree2Air devices
• BG-I29215 NFC learning dialog: added error dialog if NFC tag couldn’t be be learned encrypted
• BG-I29297 Status Monitor: duplicate Virtual Input in visualization when connected and visualization turned on
• BG-I29243 EnOcean: Extension from Clients not selectable in Learn Dialog
• BG-I29128 Configure Miniserver: Miniserver related tabs excluded from dialog when opened from configuration tree
• BG-I29159 Cover page: Relay extension not displayed correctly
• BG-I29439 Tree Search: Hardware version missing
• Config crash when updating periphery tree when there is a touch & grill
• BG-I29547 User created via App can’t login on a Client
• BG-I29527 Burglar Alarm: Remanence when alarm is triggered by single sensor
• BG-I29434 Lines to nowhere when cutting & pasting control which uses API connector
• BG-I28449 Tesla Powerwall uses imbalanced Meter reading calculation added info to documentation
• BG-I29573 Error message during Auto Update process directly set to historic
• PicoC: Serial stream not created when name is ambiguous
• BG-I29227 Meter for Storage: Storage level missing in automatic designer
• BG-I28702 Sorting: Options of combo box not correctly alphabetically sorted
• BG-I28029 Miniserver Configuration: could be changed remotely when remote configuration was disabled
• BG-I29509 Lumitech Standard actor: invalid value in liveview for certain colour-temperatures
• BG-I29219 Belimo Devices: Merged to Parent if only a single device was used
• BG-I29174 Easter Incorrectly set in PL-Calendar
• Modbus
  • BG-I26875 Modbus sensor unable to be read as digital
  • BG-I27973 Modbus RTU Function 15 not working
  • BG-I28170 Modbus RTU sending, but unable to receive
  • BG-I28695 Modbus Test Command
• BG-I28843 Device Status: Diagnosis button does nothing when there is no item in the tree is selected
• BG-I29241 Automatic Designer: Objects with room/category ‘do not use’ are not shown in dialog
• BG-I22809 Changed ‘Allow password edit’ right of a user via app is not properly loaded from Miniserver
• BG-I29497 Managed Tablet not shown with proper name in control history on gateway client system
• BG-I29507 Learning Dialog shows no columns
• BG-I29311 Dali Fade Rate setting has a misleading description
• BG-I24495 Automatic Designer rule is triggered when saving to Miniserver on a client gateway system
• BG-I29549 Remove Support community button from ribbon since it’s not valid anymore
• BG-I29521 Monoflop: Remanence not working when time parameter is set via logic
• BG-I29554 Connection references in a gateway system result in name in the visualization including the abbreviation
• Removed switch to program tree when searching via F5 
• BG-I29275 System Status: Historic Message is set to unread 
• Loading from Miniserver is slow when having a lot of system schematics 
• BG-I29471 Device Status has a slow performance and expands items which don’t have an error 
• BG-I28836 Push is sent delayed due to failing DNS resolves (Resolved IP is now kept updated) 
• BG-I29289 Alarm Clock: Alarm activates for past entries when operating modes change 
• BG-I29310 Alarm Clock: Tna output shows wrong time when next alarm is after a daylight savings change 
• BG-I29334 Monitors are not properly docked at the bottom of the config 
• BG-I28624: Door & Window Monitor Faulty app status on Client Gateway System when Gate or Window blocks are in use 
• BG-I29135: Intercom Search Dialog Configure device button enabled without search results 
• NFC Learn Dialog NFC Code Touch not preselected in certain cases 
• BG-I25498: NFC Learn: NFC Code Touch Air in battery operation doesn’t get learn mode packets 
• BG-I29346 Integrated shading: output set to 1.1 in config simulation 
• BG-I29285 Expert Mode: changes on input reverted when saving 
• BG-T2728 items are automatically collapsed in Device Status dialog 
• Client/Gateway: User update received via Trust sent via UDP to client resulting in a possible loss of the command 
• BG-I29092 HTTPS-Encryption: Removed unsecure TLS ciphers (TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 & TLS_DHE_RSA_WITH_AES_128_GCM_SHA256) 
• BG-I28803 Webservice fails when it contains certain text parts 
• BG-I29248 Property window scrolls up when saving project 
• BG-I27950 Intercom: Shift auto update time depending on SN when default is used 

Audio 

• BG-I29497 Audio Player History shows room next to Audioserver 
• BG-I29559 Audio Central doesn’t show TTS input when linked to a MuS zone 

Devices & Extensions 

• Touch Tree, Touch Pure Tree and Touch Pure Tree CO2 

• • BG-I29208 Webservice setting error  

• Presence Air 

• • BG-I25344 Sensor not reacting during overrun time leading to sending of inactive even though motion is present 
  • BG-I24985 Device sending move is active while being kept awake 

• Presence Sensor Tree  

• • BG-I28540/BG-I25543 implemented additional brightness value check to prevent excessive sending of brightness values 

Project Planning 

• BG-I29510 Project Planning: PWM channels with different names create additional dimmers 

Energy 

• BG-I29124 Wallbox Manager: Wallbox can no longer be added if previous Wallboxmanager was deleted in some cases 
• BG-I29326 Wallbox Manager: Wrong calculation during phase switch of wallbox 
• BG-I29185 Spot Price Optimizer: Negative values do not work in simulation 

Trust 

• BG-I29165 Trust: Same user multiple times in project 
• Trust added logging to def.log when User management data update was not sent to another member 

Climate 

• BG-I29191 Intelligent Roomcontroller: Outputs shortly set to 100% on startup 
• BG-I29322 Climate Controller: always use current outdoor temperature as “average” in config simulation 
• BG-I29235 Intelligent Room controller: Removed Climate controllers are not unregistered 
• BG-I29360 Climate Controller programmed on Gateway doesn’t see IRC blocks programmed on Client 

Multiplicator 

• BG-I29470 Can’t add more than one API actor reference 
• BG-I29258 Assigning NFC or code to user is not serialized 
• Trust users have duplicates in programs with different permissions 
• BG-I27963 Changes in Logger/Mailer/Tracker settings not serialized 

Audio 

• BG-I29225 Audio Player: Update Player names after Expert Mode / Visu changes 
• BG-I29186 Audio Fixed Group: LineIn not forwarded to players 
• BG-I29083 Audioserver: Miniserver tries to send grouped command while websocket is not connected 

Stability 

• Miniserver reboot when accessing invalid object via serial stream in picoc 
• BG-I29517 Miniserver update fails due to less RAM 
• BG-I29236 Config crash when running for a longer time 

New 

• Dali Extension DALI2 support 

• • Only for certified Extensions 

• BG-T3186 Audio Player: Control History 
• A3D9-T1193 Audio Player: Setting “Room favourite priority” 

• • If checked the Audio Player always starts with the first favourite 

• Multiplicator: Allow reset changes of a setting on all managed Miniserver with one action within edit dialog in Multiplicator project 
• A3D9-T1110: NFC Code Touch authentication method parameter 

• • The authentication method can be changed through this parameter via logic 

• Ventilation: Use a PI controller for CO2 control 

• • Parameters depending on room size 

Fixed 

General 

• Removed switch to program tree when searching via F5 
• BG-I29275 System Status: Historic Message is set to unread 
• Loading from Miniserver is slow when having a lot of system schematics 
• BG-I29471 Device Status has a slow performance and expands items which don’t have an error 
• BG-I28836 Push is sent delayed due to failing DNS resolves (Resolved IP is now kept updated) 
• BG-I29289 Alarm Clock: Alarm activates for past entries when operating modes change 
• BG-I29310 Alarm Clock: Tna output shows wrong time when next alarm is after a daylight savings change 
• BG-I29334 Monitors are not properly docked at the bottom of the config 
• BG-I28624: Door & Window Monitor Faulty app status on Client Gateway System when Gate or Window blocks are in use 
• BG-I29135: Intercom Search Dialog Configure device button enabled without search results 
• NFC Learn Dialog NFC Code Touch not preselected in certain cases 
• BG-I25498: NFC Learn: NFC Code Touch Air in battery operation doesn’t get learn mode packets 
• BG-I29346 Integrated shading: output set to 1.1 in config simulation 
• BG-I29285 Expert Mode: changes on input reverted when saving 
• BG-T2728 items are automatically collapsed in Device Status dialog 
• Client/Gateway: User update received via Trust sent via UDP to client resulting in a possible loss of the command 
• BG-I29092 HTTPS-Encryption: Removed unsecure TLS ciphers (TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 & TLS_DHE_RSA_WITH_AES_128_GCM_SHA256) 
• BG-I28803 Webservice fails when it contains certain text parts 
• BG-I29248 Property window scrolls up when saving project 
• BG-I27950 Intercom: Shift auto update time depending on SN when default is used 

Devices & Extensions 

• Touch Tree, Touch Pure Tree and Touch Pure Tree CO2 

• • BG-I29208 Webservice setting error  

• Presence Air 

• • BG-I25344 Sensor not reacting during overrun time leading to sending of inactive even though motion is present 
  • BG-I24985 Device sending move is active while being kept awake 

• Presence Sensor Tree  

• • BG-I28540/BG-I25543 implemented additional brightness value check to prevent excessive sending of brightness values 

Energy 

• BG-I29326 Wallbox Manager: Wrong calculation during phase switch of wallbox 
• BG-I29185 Spot Price Optimizer: Negative values do not work in simulation 

Trust 

• BG-I29165 Trust: Same user multiple times in project 
• Trust added logging to def.log when User management data update was not sent to another member 

Climate 

• BG-I29235 Intelligent Room controller: Removed Climate controllers are not unregistered 
• BG-I29360 Climate Controller programmed on Gateway doesn’t see IRC blocks programmed on Client 

Multiplicator 

• Trust users have duplicates in programs with different permissions 
• BG-I27963 Changes in Logger/Mailer/Tracker settings not serialized 

Audio 

• BG-I29225 Audio Player: Update Player names after Expert Mode / Visu changes 
• BG-I29186 Audio Fixed Group: LineIn not forwarded to players 
• BG-I29083 Audioserver: Miniserver tries to send grouped command while websocket is not connected 

Stability 

• BG-I29236 Config crash when running for a longer time 

New 

• A3D9-T975 Energy Flow Monitor: Automatic Designer support 

• • supports conditions for grid power, production power, storage power and more. 

• new binary for Nano IO Touch V1: buttons can be pressed longer than 20sec 
• new binary for Ceiling Light Tree: different brightness sensors are supported 
• A3D9-T1156 Wallbox Manager: more intelligent distribution 

• • Energy of not actively charging Wallboxes is allocated to other Wallboxes 

• New binary for Water Sensor Air and Door and Window Contact Air: display system message when button is stuck 
• A3D9-T1164 Wallbox Price Inputs 
• added webservice (/dev/sys/updatetolatestrelease) to update Miniserver to latest release 

• • A3D9-T1046 Window Handle: Tilt Position (Tilt Before Open) 
  • A3D9-T1076 Negation of digital Inputs 

• A3D9-T1155 Admin Password Reset Protection 

• • New Project Setting ‘Disable Password Reset’ that prevents resetting of admin password 

Fixed 

General 

• BG-I28910 corrected misleading appearance of tabs user permissions dialog 
• BG-I28486 incorrect encryption column data and removed misleading error column in NFC monitor 
• BG-I28897 long startup time when Config tries to load backups stored on network drives 

• BG-I28583 possible deadlock in Matter plugin 
• BG-I25884: tree communication fixes when falsely connected 
• BG-I28523: Techreport starts orientation light 
• BG-I15326 Format Dialog close button is named “Cancel” after finishing a format 
• BG-I28963 Switching time can’t be edited with double click 
• BG-I28732 Managed Tablet dialog: Button text not translatable 
• BG-I28995 System messages: Added more info to entries in def.log (serial number, room) 
• Meters: Automatic statistic deletion enabled per default 
• BG-I18120 Copy-Pasting BACnet IO causes duplicate IDs 
• BG-I25288 & BG-I16183: SIA keeps old failed messages across sps restarts and continues to retry them 
• BG-I23285 RS232/RS485 learn dialog also adds checksums (if enabled) to the command recognition 
• BG-I28584 Systemstatus Dialog: read indicator incorrect when reopening dialog 
• BG-I29030 Threshold Switch: undefined behaviour when input value to large 
• BG-I28912 Display Settings: Status-text not shown in certain configurations 
• BG-I29109 Status Monitor: No text generated at output Txlc when logic block was connected 
• BG-I29024 Block History: Lock by user in App does not show the user 
• BG-I26201 “Device assigned” text on blocks with common Api connectors 
• BG-I26720 Operating times with / in name cannot be edited via app 
• BG-I29057 Window: Target position not updated during protection movement 
• BG-I29032 fixed cover page for DI Extension 

• BG-I28968 AC Control Air: Invalid Device Type in App-Search 
• BG-I27934 Print Document: page order of devices now represents order in tree 
• BG-I27085 Emergency/AAL Alarm: device name instead of sensor name used for text output 
• Digital Inputs: Inverted input text not marked red 
• Operating Mode: Default Colour black and colour not saved 
• BG-I28993 Status Monitor: Description text not used for function block history and Txlc output 
• BG-I28808 Status Monitor: App navigation not possible for objects connected to input ‘Stat’ without visualization enabled 
• Restricted Visualization: Attribute was not removed if object didn’t need it anymore  
• Exosphere: corrected mTLS connection handling 
• BG-I22854 Tree Extension: old popup message when activating tree intercommunication on dummy tree extension 
• BG-I28631 Miniserver Keychain: Credentials not saved when connected via Miniserver Search 
• BG-I28466 API/Webservices: /astate returned value from /state 
• BG-I28738 Status Monitor: Tlxc output used name of device instead of input 
• BG-I22492 Property Window: Operating Mode colour could not be changed with multi select 
• fixed crash learning multiple XAL devices 
• BG-I28740 Belimo Datapool device does not have unique connection ID 
• BG-I28749 Virtual input switches between analogue and digital after first connection 
• BG-I28773 DeviceStatus: Duplicate entries for Music Server Zones 
• BG-I27240 Property Window not updated after closing Intelligent Room Controller Dialog 
• BG-I27236 Expert Mode: user can move objects to rooms without permission 

• BG-I28473 Device command context-menu not available for Miniserver-Tree 
• BG-I28549 Sequence Control Dialog: Adapted Tab-size 
• BG-I28650 Cabinet of Tree Turbo cannot be used from Audioserver or Miniserver 
• BG-I28595 Device Status: removed context-menu “diagnosis” for single devices 
• BG-I24011 Text Generator: line breaks not properly set on output 
• BG-I28373 System Message: No message when automatic update fails 
• BG-I28441 Connect Miniserver: Wrong error message displayed because validity of Miniserver serial number not being checked 
• BG-I28571 Property Window: Editing Miniserver serial number of trust manager did not update serial number in trust section 
• BG-I28083 HTTP Monitor: some ok http codes marked red in monitor 
• BG-I28625 Status Monitor: deleting linked status monitor does not unlink from master 
• Status Monitor: unconfigured status not correct in App 
• BG-I28325 Wrong page ordering after importing project 
• Wrong http return value for system status webservice when confirming custom system message 
• BG-I28539 Adding Miniserver as a client preselects an old address 

Devices & Extensions 

• Touch Pure Air 

• • BG-I24686 incorrect temperature/humidity measurement 

• Touch Pure Tree 

• • internal improvements for error handling 

• • BG-I28530: false clicks during tree diagnosis 

• Touch Tree 

• • Buzzer sound reverted to last release version 
  • fix for old touches not reacting anymore 

• Touch Pure Tree CO2 

• • internal improvements for error handling 

• Valve Actuator Air V2 

• • learn button for 15sec active after power reset instead of 5, other various improvements 

• Valve Actuator Tree 

• • BG-I26764 hardware error not shown in system status 

• AC Control Air Firmware: 14.07.02.09 

• • BG-I26759 Mitsubishi Electric supports Aircons with different baud rate 
  • BG-I25684 Daikin P1P2 vane position would affect fan speed when set to 0 
  • Mitsubishi Heavy Industries force temperature range 

• Nano IO Air  

• • BG-I26173 goes offline sporadically 

• Touch Surface Air 

• • BG-I23268 no click sounds on T6 when LEDs aren’t visible 
  • BG-I20671 visual feedback in calibration dialog not working 

• KNX Extension  

• • BG-I27277 it’s possible to add more than 500 actors/sensors by cut/paste 

• XAL Light Air 

• • fix for device feature readout 

• M-Bus 

• • BG-I27408 M-Bus device Techem Type 4.1.1 can’t be learned in 

• Windows Handle Air V1  

• • BG-I25470 Closed position “up” functions the same as “down” 

• Nano DI Tree 

• • general communication improvements 

• Presence Sensor Tree 

• • PIR sensitivity settings improved 

Energy 

• BG-I24212 Energy Manager: not marked unconfigured when no valid load was defined 
• BG-I21676 Energy Manager: Minimum state of charge change in App doesn’t update in Config 
• Wallbox: Remanence not used for target power of manual mode 99 
• BG-I29033 Wallbox Manager has statistics activated by default even if it has none 

Trust 

• BG-I28315 Local admin does not see any objects in visualization 
• BG-I28570 Trust: Custom change after replacing trust manager leads to config crash 
• BG-I28413 Replace Miniserver Dialog: Trust Manager serial number not adapted 

Auto Configuration 

• BG-I28771 Incomplete ToDo for power failure operating mode 
• BG-I29022 Adapted tooltip for Audio-Column 

Project Planning 

• BG-I28908 Added tooltip for installation location describing the creation of lighting groups for light products 
• BG-I28543 Damper has invalid name 

Climate 

• BG-I28615: Intelligent Room controller: valve output reduced when reaching heat protection temperature 

Audio 

• BG-I28407 Audio Player: Music is not stopped after Event when input “Off” is active during Event 
• BG-I28511 Audio Player: invalid “off” command after multiple bell events 
• BG-I28527 Audio Group Fix und Central: V+ output not triggered 
• BG-I28408 Audio Group Fix + Central Music: Added Parameter Double-Click-Time (Tdc) 
• Music Extension: Temperature Shutdown sensor by CPU overtemperature reset by AMP thermal protection 
• Audioserver: “Separate Stereo Output” enabled for Line-In and SPDIF channels 
• BG-I23372 Audioserver Search Dialog Columns order not correct 
• BG-I28745 Audio Central doesn’t forward TTS events to Music Server zones 
• BG-I28724 Audioplayer: TTS not executed when text contains ‘/’ 
• BG-I23450 Audio Player: default room is only respected for first block when inserting multiple outputs unto the page 

• BG-I28780 Double klick on Audio Player Fixed Group’s inputs V+ and V causes pulses on Audio Player’s outputs V+ and V- 
• BG-I28850 Audio Central/Audioplayer group fix: Add property “ignore room off gesture” 
• BG-I28826 Audio Fixed Group input Off does not stop Player after Event 
• BG-I28693 Missing Documentation for Stereo Extension 
• Split Audio Outputs cannot be assigned a speaker type 
• BG-I28994 Stereo Extension: System message does not contain serial number or room 
• BG-I23449 Stereo Extensions not sorted alphabetically 
• BG-I23436 Stereo Extension search: enable continuous search 

Stability 

• BG-I28537 Config Crash when cancelling diagnosis 
• Fixed config crash when saving into gateway-client with trust users 
• BG-I28690 Config Crash: loading from Miniserver while Air diagnosis is running 
• BG-I28858 Config crash when opening a config file via file browser 

New 

• A3D9-T975 Energy Flow Monitor: Automatic Designer support 

• • supports conditions for grid power, production power, storage power and more. 

• new binary for Nano IO Touch V1: buttons can be pressed longer than 20sec 
• new binary for Ceiling Light Tree: different brightness sensors are supported 
• A3D9-T1156 Wallbox Manager: more intelligent distribution 

• • Energy of not actively charging Wallboxes is allocated to other Wallboxes 

• New binary for Water Sensor Air and Door and Window Contact Air: display system message when button is stuck 
• A3D9-T1164 Wallbox Price Inputs 
• added webservice (/dev/sys/updatetolatestrelease) to update Miniserver to latest release 

• • A3D9-T1046 Window Handle: Tilt Position (Tilt Before Open) 
  • A3D9-T1076 Negation of digital Inputs 

• A3D9-T1155 Admin Password Reset Protection 

• • New Project Setting ‘Disable Password Reset’ that prevents resetting of admin password 

Fixed 

General 

• BG-I28910 corrected misleading appearance of tabs user permissions dialog 
• BG-I28486 incorrect encryption column data and removed misleading error column in NFC monitor 
• BG-I28897 long startup time when Config tries to load backups stored on network drives 

• BG-I28583 possible deadlock in Matter plugin 
• BG-I25884: tree communication fixes when falsely connected 
• BG-I28523: Techreport starts orientation light 
• BG-I15326 Format Dialog close button is named “Cancel” after finishing a format 
• BG-I28963 Switching time can’t be edited with double click 
• BG-I28732 Managed Tablet dialog: Button text not translatable 
• BG-I28995 System messages: Added more info to entries in def.log (serial number, room) 
• Meters: Automatic statistic deletion enabled per default 
• BG-I18120 Copy-Pasting BACnet IO causes duplicate IDs 
• BG-I25288 & BG-I16183: SIA keeps old failed messages across sps restarts and continues to retry them 
• BG-I23285 RS232/RS485 learn dialog also adds checksums (if enabled) to the command recognition 
• BG-I28584 Systemstatus Dialog: read indicator incorrect when reopening dialog 
• BG-I29030 Threshold Switch: undefined behaviour when input value to large 
• BG-I28912 Display Settings: Status-text not shown in certain configurations 
• BG-I29109 Status Monitor: No text generated at output Txlc when logic block was connected 
• BG-I29024 Block History: Lock by user in App does not show the user 
• BG-I26201 “Device assigned” text on blocks with common Api connectors 
• BG-I26720 Operating times with / in name cannot be edited via app 
• BG-I29057 Window: Target position not updated during protection movement 
• BG-I29032 fixed cover page for DI Extension 

• BG-I28968 AC Control Air: Invalid Device Type in App-Search 
• BG-I27934 Print Document: page order of devices now represents order in tree 
• BG-I27085 Emergency/AAL Alarm: device name instead of sensor name used for text output 
• Digital Inputs: Inverted input text not marked red 
• Operating Mode: Default Colour black and colour not saved 
• BG-I28993 Status Monitor: Description text not used for function block history and Txlc output 
• BG-I28808 Status Monitor: App navigation not possible for objects connected to input ‘Stat’ without visualization enabled 
• Restricted Visualization: Attribute was not removed if object didn’t need it anymore  
• Exosphere: corrected mTLS connection handling 
• BG-I22854 Tree Extension: old popup message when activating tree intercommunication on dummy tree extension 
• BG-I28631 Miniserver Keychain: Credentials not saved when connected via Miniserver Search 
• BG-I28466 API/Webservices: /astate returned value from /state 
• BG-I28738 Status Monitor: Tlxc output used name of device instead of input 
• BG-I22492 Property Window: Operating Mode colour could not be changed with multi select 
• fixed crash learning multiple XAL devices 
• BG-I28740 Belimo Datapool device does not have unique connection ID 
• BG-I28749 Virtual input switches between analogue and digital after first connection 
• BG-I28773 DeviceStatus: Duplicate entries for Music Server Zones 
• BG-I27240 Property Window not updated after closing Intelligent Room Controller Dialog 
• BG-I27236 Expert Mode: user can move objects to rooms without permission 

• BG-I28473 Device command context-menu not available for Miniserver-Tree 
• BG-I28549 Sequence Control Dialog: Adapted Tab-size 
• BG-I28650 Cabinet of Tree Turbo cannot be used from Audioserver or Miniserver 
• BG-I28595 Device Status: removed context-menu “diagnosis” for single devices 
• BG-I24011 Text Generator: line breaks not properly set on output 
• BG-I28373 System Message: No message when automatic update fails 
• BG-I28441 Connect Miniserver: Wrong error message displayed because validity of Miniserver serial number not being checked 
• BG-I28571 Property Window: Editing Miniserver serial number of trust manager did not update serial number in trust section 
• BG-I28083 HTTP Monitor: some ok http codes marked red in monitor 
• BG-I28625 Status Monitor: deleting linked status monitor does not unlink from master 
• Status Monitor: unconfigured status not correct in App 
• BG-I28325 Wrong page ordering after importing project 
• Wrong http return value for system status webservice when confirming custom system message 
• BG-I28539 Adding Miniserver as a client preselects an old address 

Devices & Extensions 

• Touch Pure Air 

• • BG-I24686 incorrect temperature/humidity measurement 

• Touch Pure Tree 

• • internal improvements for error handling 

• • BG-I28530: false clicks during tree diagnosis 

• Touch Tree 

• • Buzzer sound reverted to last release version 
  • fix for old touches not reacting anymore 

• Touch Pure Tree CO2 

• • internal improvements for error handling 

• Valve Actuator Air V2 

• • learn button for 15sec active after power reset instead of 5, other various improvements 

• Valve Actuator Tree 

• • BG-I26764 hardware error not shown in system status 

• AC Control Air Firmware: 14.07.02.09 

• • BG-I26759 Mitsubishi Electric supports Aircons with different baud rate 
  • BG-I25684 Daikin P1P2 vane position would affect fan speed when set to 0 
  • Mitsubishi Heavy Industries force temperature range 

• Nano IO Air  

• • BG-I26173 goes offline sporadically 

• Touch Surface Air 

• • BG-I23268 no click sounds on T6 when LEDs aren’t visible 
  • BG-I20671 visual feedback in calibration dialog not working 

• KNX Extension  

• • BG-I27277 it’s possible to add more than 500 actors/sensors by cut/paste 

• XAL Light Air 

• • fix for device feature readout 

• M-Bus 

• • BG-I27408 M-Bus device Techem Type 4.1.1 can’t be learned in 

• Windows Handle Air V1  

• • BG-I25470 Closed position “up” functions the same as “down” 

• Nano DI Tree 

• • general communication improvements 

• Presence Sensor Tree 

• • PIR sensitivity settings improved 

Energy 

• BG-I24212 Energy Manager: not marked unconfigured when no valid load was defined 
• BG-I21676 Energy Manager: Minimum state of charge change in App doesn’t update in Config 
• Wallbox: Remanence not used for target power of manual mode 99 
• BG-I29033 Wallbox Manager has statistics activated by default even if it has none 

Trust 

• BG-I28315 Local admin does not see any objects in visualization 
• BG-I28570 Trust: Custom change after replacing trust manager leads to config crash 
• BG-I28413 Replace Miniserver Dialog: Trust Manager serial number not adapted 

Auto Configuration 

• BG-I28771 Incomplete ToDo for power failure operating mode 
• BG-I29022 Adapted tooltip for Audio-Column 

Project Planning 

• BG-I28908 Added tooltip for installation location describing the creation of lighting groups for light products 
• BG-I28543 Damper has invalid name 

Climate 

• BG-I28615: Intelligent Room controller: valve output reduced when reaching heat protection temperature 

Audio 

• BG-I28407 Audio Player: Music is not stopped after Event when input “Off” is active during Event 
• BG-I28511 Audio Player: invalid “off” command after multiple bell events 
• BG-I28527 Audio Group Fix und Central: V+ output not triggered 
• BG-I28408 Audio Group Fix + Central Music: Added Parameter Double-Click-Time (Tdc) 
• Music Extension: Temperature Shutdown sensor by CPU overtemperature reset by AMP thermal protection 
• Audioserver: “Separate Stereo Output” enabled for Line-In and SPDIF channels 
• BG-I23372 Audioserver Search Dialog Columns order not correct 
• BG-I28745 Audio Central doesn’t forward TTS events to Music Server zones 
• BG-I28724 Audioplayer: TTS not executed when text contains ‘/’ 
• BG-I23450 Audio Player: default room is only respected for first block when inserting multiple outputs unto the page 

• BG-I28780 Double klick on Audio Player Fixed Group’s inputs V+ and V causes pulses on Audio Player’s outputs V+ and V- 
• BG-I28850 Audio Central/Audioplayer group fix: Add property “ignore room off gesture” 
• BG-I28826 Audio Fixed Group input Off does not stop Player after Event 
• BG-I28693 Missing Documentation for Stereo Extension 
• Split Audio Outputs cannot be assigned a speaker type 
• BG-I28994 Stereo Extension: System message does not contain serial number or room 
• BG-I23449 Stereo Extensions not sorted alphabetically 
• BG-I23436 Stereo Extension search: enable continuous search 

Stability 

• BG-I28537 Config Crash when cancelling diagnosis 
• Fixed config crash when saving into gateway-client with trust users 
• BG-I28690 Config Crash: loading from Miniserver while Air diagnosis is running 
• BG-I28858 Config crash when opening a config file via file browser 

New 

• Loxone Exosphere Integration 
  • Upload your projects to the cloud 
  • Save Credentials to your Exosphere workspace and share them with your colleagues 

Fixed 

General 

• Some texts in Project management View were not translated correctly 
• BG-I28145 System Schematic: dependency loop possible to configure where one system schematic uses the visualization of the other 
• BG-I28386 NFC Authentication: Off input does not reset all outputs 
• BG-I21712 Remanence: Remanence of T5 input was saved which caused Lighting Controller to change mood when saving into MS 
• BG-I23142 Climate Controller: Does not sort list with selected objects on top 
• Project Size calculation makes big jumps when adding many clients 
• System Status: Many changed events on gateway systems even if nothing has changed 
• BG-I28451 Watchdog Reboot while doing Miniserver backupBG-I28401 Device status: add “start diagnosis” for Tree2Air-Bridge 
• BG-I28247 Network Device Pairing: improved System-Message when encountering errors 
• BG-I28155 Gate Controller: renaming control does not rename referenced Hörmann-Device 

Diagnosis 

• Diagnosis Miniserver: Skip Internet-check if configured in systemvariable 
• BG-I28437 HealthCheck: stops on empty Air-Base 

Climate 

• BG-I27790 Intelligent Room Controller: Initial value for ϑch / ϑcc not adapted for touch flex when changed via app 
• BG-I27886 Intelligent Room Controller: fixed setpoint not resetting after manually cancelling timer 

New 

• Miniserver Shortcut function block 
  • Add a Shortcut to another Miniserver within the visualization  
• A3D9-T1036: Status Monitor 
  • Keep an eye on your devices, states, and values with our new generic monitoring block 
• Door And Window Monitor: 
  • Allow nesting of Door and Window Monitor objects 
  • Allow select of gate controller 
• Meter: Detection and prevention in invalid Meter Readings 
  • Decreases in the Meter Reading are not allowed anymore 
  • Major increases are detected 
    • An invalid change is now detected when the single meter change is bigger than the current Meter Reading and bigger than 10000 
  • Only if the time difference since the last value change is smaller than 8h 
  • User will be informed via System Message 
  • System Message can be deactivated 
• Network Devices: Address Resolve Fallback 
  • If the Miniserver fails to connect to the defined hostname/address it will try to find the correct address by searching for the device in the network 
  • This enables a connection to the device even if the network settings were misconfigured 
  • Hostname entered but the device set to a static IP 
  • IP entered but the device has gotten a new IP via DHCP 
  • Supported on Miniserver Gen.2 for Loxone Network Devices (Audioserver, Intercom) 
• Added Portuguese 
• Loxone Config Instance handling 
  • When a config is already running double clicking a project file now will not start an additional instance of Loxone Config 
• NFC Authentication Block: Import NFC Tags and Access Codes from CSV 
• BG-I25937 Scene: Added LineIn action 
• BG-I27642 Burglar Alarm: add support for combined window contact 
• New Miniserver Connect Dialog 
• New Miniserver Keychain Dialog 
• A3D9-T1121 User Import: Import NFC Tags and Access Codes from CSV 
• Hardened security: Webservices need to be authenticated with a token with the proper rights, when a token is used 
• A3D9-T1085 Window: Added output for target position and input for current position (Can be used with Schüco Windows) 
• Matter (0.3.0) 
  • various fixes 
  • upgraded to Matter 1.2 
• M-Bus Device: Add sequence number property to analogue inputs 
• DALI extension firmware update DALI device types 0-6 support smart actors 
• A3D9-T1035 Automatic Designer: add action “Gate: partially open” 

Fixed 

General 

• Ac Control: Wrong type text used for gree/sinclair ac control 
• BG-I28029 Admin Interface reachable when configuring via Internet is disabled 
• BG-I27980 Central Shading: Safety-Reason for “Wa” not remanent 
• BG-I27953 Tree-Filter does not compare room/category names 
• BG-I28023 Network Intercommunication: Smart/T5-sensors not received when using encryption 
• BG-I27543 Tuneable white Dali dimmer is not working when the colour temperature is not used 
• Memory Leak when converting document 
• BG-I26050 Device learning dialogs: same device couldn’t be learned out and in again in the same learning session 
• BG-I26046 Saving project to Miniserver while device diagnostics were running left diagnostics in undefined state 
• BG-I28019 room settings (Combobox settings in general) didn’t work as expected in learning dialogs 
• BG-I27690 Devices with a single sub device were merged 
• BG-I27475 Documentation has missing descriptions for IOs 
• BG-I27693 Optical/Audible identify context menu action not disabled when not connected to the Miniserver 
• BG-I27761 Auto Connect to Miniserver does not properly use address settings from project as fallback 
• BG-I27687 Generic View Column filters not showing ampersands 
• BG-I27688 Unable to distinguish Miniserver captions in template insertion dialog 
• BG-I27834 Network device search uses full qualified hostname, this leads to problems when the domain changes 
• BG-I27722 Connection of memory flag gets lost when changing referenced object via settings 
• BG-I26559 External IO/Memory Flags are not sent to other Miniserver when value changes at SPS restart 

• Addon webservice does not check token rights 
• Tokens marked for deletion still work as Bearer Token for some time 
• An Error message is displayed when using multiple virtual UDP inputs with the same port, even if it does not cause any problems 
• BG-I27702 Ac Control Air Dialog: prevent unselecting all items 
• BG-I25264 Device learning dialogs: identify command was sent in too many situations (e.g. after editing of device properties) 
• updated Alexa (0.4.0) and Husqvarna (1.0.8) addons 
• BG-I27413 RS485 Extension shows device limitation 
• BG-I27462 PS & B not in a room from planning tool 
• BG-I27369 Sequence Controller does not output “%” sign 
• BG-I26196 Automatic designer: API connector not working 
• BG-I27739 Window remanence of current position not working 
• BG-I27739 Window has a remanence parameter 
• BG-I22821 Find and Replace All replaces goes through all objects twice 
• BG-I27551 Backup webservice uses too much RAM use SD card for storing files instead 
• Increased some font sizes 
• BG-I27442 Status: Output does not show all decimal places in LiveView/Simulation 
• BG-I27418 Project Backups don’t show full note if project path contains special characters 
• BG-I27507 Managed Tablet: Childs (e.g. Online status) don’t take over room of tablet 
• Virtual HTTP command recognition window cant retrieve data from Miniserver anymore 
• BG-I27506 Error output state of sensors/inputs not remanent 

• BG-I27552 Miniserver search: Increased minimum size for buttons 
• BG-I27553 Exchanged Miniserver search and keychain buttons 
• BG-I27227 KNX Monitor: showed wrong device name for extended actors in some instances 
• BG-I27227 LiveView: no yellow highlight for negative values on analogue sensors 
• BG-I26846 IO from another Miniserver controlled via LiveView shows wrong value after page change 
• Managed Tablets: Version not displayed in device status & battery level shown in red 
• Plugin mTLS authentication not working in some cases 
• BG-I27382 Window without text can be selected in the mode ‘Freely position windows’ 
• Program shown as not identical when loading from Miniserver 
• Plugin shown offline in device status 
• BG-I27378 Input references not always sorted in front of function blocks in the list which is handled by the SPS resulting in different behaviours depending on the insertion order 
• M-Bus Extension: devices show invalid secondary addresses starting with 7F:FF:FF:FF 
• BG-I23250 DALI light is turned WHITE and then RED and we send only RED to it 
• BG-I27323 Ac Control: AutoConnect for Temperature and Window Contact 
• BG-I27279 Tree-icon inverted in Device status & Quick search 
• BG-I27455 Unpair warning message is shown when deleting a trusted intercom 
• BG-I27456 Managed Tablet App Location Filter shows duplicate results 
• Disabling default software rendering (since it caused problems on some multi-monitor setups) 

• • can be reenabled with LX_SOFTWARE_RENDERING=1 env variable where needed 

• Miele@Home Update translationsBG-I28087 Wrong error message when trying to insert logger/mailer/caller on a different Miniserver 

• Config connects locally with the external address to the Miniserver if the internal address is missing in the Keychain 
• BG-I28117 Config Caption bar shows ‘connecting’ but it already has failed 
• Miniserver Backup via webservice fails due to watchdog timeout 
• Home Connect: Rate limit is hit when plugin starts 
• Removed preselection of save path when saving documents 

• • Hidden feature which leads to errors when project was copied 

• BG-I28187 Miniserver is unable to download auto update within the defined timeout of 3 minutes -> doubled the timeout 
• BG-I28130 Miniserver Keychain: Connect to remote connect Miniserver fails with error message 
• Read System messages not set to unread when being retriggered (e.g. Audioserver Spotify info messages) 
• BG-I28329 HealthCheck selection: remove option for MS-Gen1 Miniserver-Diagnosis 
• Device Status: Actions for tree-branches on client miniserver executed on wrong miniserver 
• BG-I28278 Miniserver-Diagnosis fixed typo when client miniserver is offline 
• BG-I28277 Link/Tree Diagnosis stuck when client miniserver is offline 
• BG-I28138 Managed Tablet is not shown with correct name in Control History 
• BG-I28293 Race Condition when starting update on different Miniservers in parallel, resulting in project mix-up 
• BG-I28274 No message when doing search & replace and text was not found 
• BG-I28230 Miniserver Connection: Wrong error message when Miniserver is registered but does not have Internet 
• Converted stored connection data is incorrect for Miniserver Gen.1 which use CloudDNS since it has stored an outdated resolved IP 
• BG-I28354 & BG-I28154 Intercommunication: Empty text or text starting with special characters not sent 
• BG-I28168 LiveView: Intercommunication T5 output can’t be switchedBG-I28148 Sequence Controller: focus lost when renaming variables/inputs/outputs 

• BG-I26198 Sequence Controller: changing variable name does not replace variables in all sequence pages 
• BG-I28318 Connection reference on math function block does not show a value in LiveView/Simulation 
• BG-I28384 Drag and Drop multiselection allows connection of an output to an input and vice versa 
• Possible queue overflows when sending messages to Link or internal Tree of Miniserver 
• BG-I28293 Race Condition when two configs save to a Miniserver in parallel 

Devices & Extensions 

• Nano Dimmer Air US  

• • BG-I27499 No system status message for short circuit  
  • Fix for production test 
  • System temperature is sent two times after startup 

• Extend air diagnosis on Door and Window Contact Air, Touch Air and NFC Code Touch Air 
• Dali 

• • DALI fading time bugfix for smart actuators 
  • BG-I23250 DALI light is turned WHITE and then RED and we send only RED to it 
  • DALI address 0 starts identifying when the DALI extensions is identified 
  • Reconnect to Audioserver after saving to Miniserver takes very long 

• BG-I27719 Touch Pure Flex: Long button press does not properly reset back to zero when releasing the button 
• M-Bus Extension: Do not monitor 8-bit M-Bus device status field due to a high number of false positives 
• Dali Firmware 14.07.02.08 

• • BG-I27853 fixed control of DALI actors 
  • Random DALI identify 

• Miniserver, Miniserver Go, Miniserver Compact coprocessor Firmware 14.7.2.14 

• • Fixed multiple routing of messages to Link interface 
  • Fixed initialization of internal Tree 
  • Improved error statistics 

• Tree Extension Firmware 14.7.2.14 

• • Fixed multiple routing of link legacy packets causing lost packets under high bus load 
  • Fixed possible missed packets on Tree branches under high bus load 
  • Fixed possible delays when one Tree branch is faulty or unused causing lost packets under high bus load 
  • Improved error statistics 

• Nano DI Tree Firmware 14.7.2.14 

• • BG-I18791 Fixed possible packet losses 

• Touch Tree Firmware 14.7.2.14 

• • BG-I23335 Fixed possible packet losses 

• Extension Firmware 14.7.2.14 

• • BG-I18935 Extension sends inputs delayed 

• BG-I18613 Touch Pure Flex: Config does not allow characters (# & $) even if they are supported by the device 

Shading 

• BG-I27030 Geiger SOLIDline ZIP Air: dwc input not working after Obstacle detected 

Audio 

• BG-I28113 Audio Player: end of presence does not pause manually started music 
• BG-I28114 Audio Player: presence does not start music during active event 
• BG-I28146 Audio Player: outputs V+/V# trigger when no music is playing 
• BG-I28137 Music Extension: no System messages shown when extension is not used on a Player 
• Music Extension: add System message for high CPU Temperature 
• Miniserver creates invalid init message when connecting to network devices (Audioserver, Intercom) causing pairing errors (invalid Base64 encoding) 
• BG-I28305 Audio Player: Bell immediately stops on falling edge of input instead of playing the whole file 
• BG-I28353 Audio Central: TTS retriggered on SPS restart 
• BG-I28385 Audio Player: Event stays active after restart 
• BG-I27958 fix USB/SD Content mixed up in wrong order 
• BG-I27892 cleanup of tts files when exceeding 100M, changed to delete files >= 2d (was 7d) 
• BG-I27916 fix crash in TunineSourceFinder 
• BG-I28037 fixed issue with Radio Station that sends stream instead of m3u urls 
• BG-I28404 fixed missing Contextual Info in Queue view 
• BG-I28358 fixed adding custom urls Streaming Servers that do not support HEAD Requests 
• Issue where spotify locally started causes other Players in fixed group (singlemode) to start too. 
• Eemoved Stream Prebuffering causing latency issues in Radio playback 
• Spotify no playback but shows visual playback (former spotifyconnect patch) 

• ‘New Audioserver Software’ reports did not work due to timeouts 
• Stream Error Handling for unplayable streams improved 
• Race conditions that can cause a crash on event playback 
• Performance optimizations for Miniserver Compact Audio distribution on local Tree Turbo 
• Volume+ command on muted playergroup causing the volume to increase on one player 
• Player Default Volumes did not sync on startup could cause unexpected behaviour 
• Issue where System Status Messages and Callback Actions were not reliably forwarded 
• Custom Sound Event Volumes 

Climate 

• BG-I27771 Intelligent Room Controller: Multiple history entries when starting timer during manual calendar temperature 
• BG-I28129 Intelligent Room Controller: Presence does not extend Comfort mode started by input “C” 
• Intelligent Room Controller: improved text for history-entry “source blocked” 

Lighting 

• BG-I27718 Lighting Controller: Inconsistent Capitalization in English 
• Light controller: invalid output value for rgb-only smartactors 

Energy 

• BG-I27409 Copy of Wallbox which is managed by Wallbox Manager 
• BG-I27053 Wallbox: limitation via Api connector not remanent 

• BG-I27525 Wallbox Manager: Change of priority price not directly forwarded to Wallboxes 
• BG-I26303 Wallbox: Lcl output doesn’t use specified unit 
• BG-I26268 Wallbox Gen.1: wrong calculation of E1/E2 
• BG-I27927 Wallbox: System message Supply drop can’t be quitted 
• BG-I26899 Wallbox behaving incorrectly when Vc output is inverted 
• Wallbox Manager: Loads not activated 
• Quick Search: Energy Flow Monitor not shown as top result 
• BG-I27705 Energy Flow Monitor: Rest node does not use defined units 

Multiplicator 

• BG-I27242 Multiplicator: Miniserver dialog allows duplicate serials 
• BG-I27508 Multiplicator: Disinheriting also goes across input references this results in disinheritance of large logic blocks even if they only connection is using the same inputs 
• BG-I28153 Multiplicator: Custom Changes (Expert mode) on disinherited controls removes them from project when loading from Miniserver 

Trust 

• BG-I27820 Trust user group disappears 
• Trust Webservices not working anymore 
• Trust Link authentication not working 

Auto Configuration 

• BG-I27314 Dali outputs used even if they are already in a group 
• Managed Tablet can get created multiple times 
• BG-I27684 Removed unnecessary control hint text 

Diagnostics 

• BG-I27867 Tree Monitor does not show all information for intercommunication packets 
• Link Monitor displays wrong commands 

Project Planning 

• BG-I27402 Special characters in room and category names 
• BG-I28028 Audio products are planned with the peak power usage 

Stability 

• High SPS CPU load when there are lots of online states in the project 
• Miniserver reboot when receiving invalid text memory value from a client 
• Miniserver reboot when syncing of files to SD card takes too long 
• Config hangs when saving project 
• BG-I27532 Config crash when starting dali learning dialog 
• BG-I27538 Config crash when deleting entries from Miniserver Keychain 
• BG-I27339 Config crash when loading from Miniserver 
• BG-I27589 Config crash when opening default screen setting of managed tablets from setting dialog 

• Trust: Miniserver reboot when user is deleted due to race condition 
• BG-I27619 Config crash when importing project 
• BG-I27821 Config crash when saving to Miniserver 
• BG-I27909 Config crash when loading from Miniserver 
• BG-I27639 Config crash when doing an Undo while Monitor was opened 
• BG-I28182 Config crash when opening Wallbox Manager or EFM dialog out of setting edit dialog 
• BG-I28018 Config crash when resetting multiplicator changes 
• BG-I27821 Config crash when saving to Miniserver 

New 

• A3D9-T1036: Status Monitor 

• Keep an eye on your devices, states, and values with our new generic monitoring block 

Fixed 

General 

• HealthCheck Tree: fixed dialog lags on client Miniservers 
• BG-I28329 HealthCheck selection: remove option for MS-Gen1 Miniserver-Diagnosis 
• Device Status: Actions for tree-branches on client miniserver executed on wrong miniserver 
• BG-I28278 Miniserver-Diagnosis fixed typo when client miniserver is offline 
• BG-I28277 Link/Tree Diagnosis stuck when client miniserver is offline 
• BG-I28138 Managed Tablet is not shown with correct name in Control History 
• BG-I28293 Race Condition when starting update on different Miniservers in parallel, resulting in project mix-up 
• BG-I18613 Touch Pure Flex: Config does not allow characters (# & $) even if they are supported by the device 
• BG-I28274 No message when doing search & replace and text was not found 
• BG-I28230 Miniserver Connection: Wrong error message when Miniserver is registered but does not have Internet 
• Converted stored connection data is incorrect for Miniserver Gen.1 which use CloudDNS since it has stored an outdated resolved IP 
• BG-I28354 & BG-I28154 Intercommunication: Empty text or text starting with special characters not sent 
• BG-I28168 LiveView: Intercommunication T5 output can’t be switchedBG-I28148 Sequence Controller: focus lost when renaming variables/inputs/outputs 

Energy 

• Quicksearch: Energy Flow Monitor not shown as top result 
• BG-I27705 Energy Flow Monitor: Rest node does not use defined units 

Audio 

• BG-I28137 Music Extension: no System messages shown when extension is not used on a Player 
• Music Extension: add System message for high CPU Temperature 
• Miniserver creates invalid init message when connecting to network devices (Audioserver, Intercom) causing pairing errors (invalid Base64 encoding) 
• BG-I28305 Audio Player: Bell immediately stops on falling edge of input instead of playing the whole file 
• BG-I28353 Audio Central: TTS retriggered on SPS restart 

Climate 

• BG-I28129 Intelligent Room Controller: Presence does not extend Comfort mode started by input “C” 

Fixed 

General 

• BG-I27455 Unpair warning message is shown when deleting a trusted intercom 
• BG-I27456 Managed Tablet App Location Filter shows duplicate results 
• Disabling default software rendering (since it caused problems on some multi-monitor setups) 
  • can be reenabled with LX_SOFTWARE_RENDERING=1 env variable where needed 

• Miele@Home Update translationsBG-I28087 Wrong error message when trying to insert logger/mailer/caller on a different Miniserver 
• Config connects locally with the external address to the Miniserver if the internal address is missing in the Keychain 
• BG-I28117 Config Caption bar shows ‘connecting’ but it already has failed 
• Miniserver Backup via webservice fails due to watchdog timeout 
• Home Connect: Rate limit is hit when plugin starts 
• Removed preselection of save path when saving documents 
  • Hidden feature which leads to errors when project was copied 

• BG-I28187 Miniserver is unable to download autoupdate within the defined timeout of 3 minutes -> doubled the timeout 
• BG-I28231 Miniserver sends all zero default volumes to Audioserver in some cases 
• BG-I28130 Miniserver Keychain: Connect to remote connect Miniserver fails with error message 
• Read System messages not set to unread when being retriggered (e.g. Audioserver Spotify info messages) 

 

Devices & Extensions 

• M-Bus Extension: Do not monitor 8-bit M-Bus device status field due to a high number of false positives 
• Dali Firmware 14.07.02.08 

• • BG-I27853 fixed control of DALI actors 
  • Random DALI identify 

 

Multiplicator 

• BG-I28153 Multiplicator: Custom Changes (Expert mode) on deinherited controls removes them from project when loading from Miniserver 

Stability 

• BG-I28182 Config crash when opening Wallbox Manager or EFM dialog out of setting edit dialog 
• BG-I28018 Config crash when resetting multiplicator changes 
• BG-I27821 Config crash when saving to Miniserver