EIB motor control for the blinds using two button control
Table of Contents
Inputs↑
Abbreviation | Summary | Description | Unit | Value Range |
---|---|---|---|---|
Po | Partial open with push & hold | - | 0/1 | |
Pc | Partial close with push & hold | - | 0/1 | |
Pos | Position | Used to provide feedback of the current shading position to the function block | % | 0...100 |
DisPc | Disable periphery control | Disables inputs Po, Pc, when On. (e.g Child lock, cleaning) Control via user interface is still possible. |
- | 0/1 |
Outputs↑
Abbreviation | Summary | Description | Value Range |
---|---|---|---|
Lo | Long-term operation | -1 = passive 0 = open 1 = close Connect this output to an EIB-actuator (group address for long-term operation of blinds) |
∞ |
So | Short-term operation | -1 = passive 0 = open 1 = close Connect this output to an EIB-actuator (group address for short-term operation of blinds) |
∞ |
Pos | Position of shading | ∞ | |
AC | API Connector | Intelligent API based connector. API Commands |
- |
Parameters↑
Abbreviation | Summary | Description | Unit | Value Range | Default Value |
---|---|---|---|---|---|
Tlc | Time long-click | Pulse duration on inputs (Po) (Pc) to trigger a long-term operation (Lo). | s | 0...∞ | 0,3 |