Counting Up/Down with trigger and direction input
Table of Contents
Inputs↑
Abbreviation | Summary | Description | Value Range |
---|---|---|---|
C | Count | With each pulse, the counter is increased/decreased by 1 | 0/1 |
Dir | Direction | 0 = up, 1 = down | 0/1 |
R | Reset | When 1 (O) = 0 and (V) = (Sv) | 0/1 |
Outputs↑
Abbreviation | Summary | Description | Value Range |
---|---|---|---|
O | Output | Switches dependent on the parameter (Von) & (Voff) | 0/1 |
V | Counter value | ∞ |
Parameters↑
Abbreviation | Summary | Description | Value Range | Default Value |
---|---|---|---|---|
Rem | Remanence input | Remanence input: If active, the function block retains its previous state after a Miniserver reboot. The state of the function block is saved: – When saving to the Miniserver – At a planned reboot – Before a backup – Once per hour The data is saved on the SD card. |
0/1 | 0 |
Sv | Start value | Input parameter - start value of the ramp control | ∞ | 0 |
Von | On-value | ∞ | 10 | |
Voff | Off-value | ∞ | 5 |
Timing Diagram↑