Brief: I want to charge electric vehicles as cheaply as possible
In a world where sustainability and energy efficiency are becoming increasingly important, electric vehicle owners face the challenge of charging their vehicles in a cost-effective and environmentally friendly way.
Solution: Set situation-dependent charging modes with the Loxone Wallbox
The Loxone Wallbox makes it easy to configure different charging modes that are perfectly tailored to the needs and circumstances of electric car owners. These can be easily switched using a Touch Pure Flex, which can be installed in the Wallbox. The resulting energy flows can be easily metered via the Energy Meter 3-Phase Tree and visualized with the Energy Flow Monitor function block. An example configuration could look like this:
Full Power: This charging mode is used when the electric vehicle needs to be charged as quickly as possible. In the case of the Loxone Wallbox, charging is possible with up to 11kW.
Comfort: Here, charging takes place over a longer period of time, such as from 21:00-06:00, with lower power. In the example configuration, this is 5kW. This is battery-friendly charging.
Eco: This mode means that the electric vehicle is only charged when excess power is available – e.g. from a PV system.
Requirements/Hardware:
Configuration:
