New

• Exosphere: Session & Event Database Connector
  • write custom data to a database table defined in Exosphere
  • Configure table in Exosphere and add a Table object under Exosphere plugin in Loxone Config
  • Configure the data you want to write
  • Can be used for Billing, Logging, Monitoring, …
• Added MQTT client integration
  • insert MQTT integration under network periphery
  • one single connection to the same broker per Miniserver
  • 16 subscription inputs, max. 16 publish outputs
  • No real time communication
• Honeywell Plugin
  • seamlessly integrate Honeywell MB-Secure and MB-Secure Pro security systems with the Miniserver
  • support for arming and disarming, Detector groups, Macros, Doors, …
• Gardena Smart System integration
  • Receive states and control your Gardena smart devices (SILENO mowers, irrigation control, sensors, …)
• R20-T372 Dali Broadcast Mode for Dali Extension
• BG-T3514: M-Bus enable Primary Address Search
• A3D9-T1434: When switching through settings with tab, combo box drop-downs are now opened
  • A3D9-T1402: Load Manager Improvements
  • New “Peak Load Manager & Overload Protection” which combines peak load management with overload protection
  • New Load Shedding Delay Setting
  • General Improvements
• Logger: Send daily/weekly/monthly logs per email
  • File size is limited to 1 MB
• A3D9-T1410: Added columns for room and installation location to device status dialog
  • Installation location column is hidden per default
  • Added table settings button to show/hide columns
• A3D9-T1408: Grid preselection in project planning now allows to use 1-Phase Meter Tree
• A3D9-T1386: The advanced miniserver search now allows to use CIDR representation for ip ranges
• A3D9-T1433: New Output “Rest” in Energy Flow Manager
  • Shows rest power of the top group
• A3D9-T1348 Communication Monitor for AC Control
• Removed gentle mode from Valve Actuator Tree
• Added support for wave packet control to Dimmer Extension
• A3D9-T1391 Improved Auto Configuration
  • Presence Simulation is an option you can choose
  • Throughfares can have a presence block
  • Improved descriptions for options
  • Light moods ‘Relaxed Bright’ and ‘Creative’ no longer created
  • Button 6 on Touch Nightlight toggles Night Mode and LED Status represents if Night mode active
  • Water alarm does not call Fire Brigade
  • Panic Alarm has Touches of Sleeping Room connected
  • Air Devices used in Emergency Alarm automatically set to On/Off button behaviour
  • Power Supply & Backup function block created even when not yet fully configured
  • Adapted default values for Presence Sensors (volume (250 / 1000) and Presence Duration without movement (1800s))
  • Air Devices which get connected to Long Click function block are automatically set to On/Off button behaviour
  • Automatic Shades which don’t have yet a proper Dir parameter does not lock the app and can be still controlled
  • Audio Master/Client get a configuration dialog when inserted
• A3D9-T1403 Meters Calculate Power from Meter Reading when no power is connected
• Touch Pure Flex Gen.2
• Valve Actuator Gen.2
• AC for LG
• NFC Code Touch: added support for variable length tags with OCPP
• A3D9-T1491: Cloud Services now get Miniserver serial, version and update-level when Miniserver requests data, for better staging/production possibilities

Fixed

General

• BG-I32214 configure device button in network device learning dialog was in wrong state initially
• BG-I32308 HTTP body gets truncated when https request has no content length (virtual outputs, virtual http inputs)
• BG-I32302 Media Controller didn’t switch to a mode on power-on when there was never a mode set before (first use)
• BG-I29112 NFC Authentication auth via App not working with Two-Factor
• BG-I32232 Text Generator Connecting Uid outputs of Wallbox and NFC Authentication did not automatically connect to Uid input
• LiveView activates when Miniserver state changes
• BG-I32067 Custom Object-Permissions get lost when copy/pasting controls
• BG-I32296 Connecting multiple actors at once does not work via Connection-Window
• BG-I32411 Display Echo command on light controller is not as long active as before which breaks custom logic
• Hoermann Air commands not sent to device
• Some Air-Devices can’t be added
• Some diagnosis inputs are visible per default when learning the device via app
• BG-I32108 Internal Api commands visible in Flex Api Generator Dialog
• BG-I29892 NFC Authentication Value not verified in Config for parameter “Bbr”
• BG-I31907 NFC Authentication Wrong tooltip shown for inputs
• BG-I32200 NFC Authentication Connecting input via (+) does not always connect it to a correct input
• BG-I32189 NFC Authentication Dialog wrong output prefix ‘Q’ when output connected to outputs O1-O6
• BG-I31943 Status Monitor no check for invalid characters which could break structure file of app
• No info in caption bar when client Miniservers are not yet ready
• BG-I32101 Sequence Controller spaces get lost when concatenating text elements
• BG-I32012 App-Device-Search Tree of Intercom not shown
• BG-I31917 App-Device-Search missing switchboard-options for extension-search results
• BG-I31918 App-Device-Search Link Devices not replaceable
• BG-I3215 Multiple connections between same connectors possible
• BG-I31980 Presence Control delay activation via Touch Flex to avoid concurrent commands
• BG-I31830 Miniserver Gen.1 does not get an IP address from DHCP when it takes too long to answer (Increased timeouts)
• BG-I32053 Home Button not translatable
• Connection reference can be moved by selecting other objects
• BG-I31930 Insert of Audio devices not always enabled
• BG-I31148 HealthCheck got stuck in endless loop when executing diagnosis on Miniserver Compact with no stereo extensions connected
• BG-I32094 main menu in Project Management view is cutoff on small screen resolutions
• BG-I31910 when loading a project directly from Exosphere cancel didn’t always work as expected
• BG-I31174 reapply active filters when DeviceStatus data is updated
• BG-I32158 improved scrolling in MyProjects view
• Removed info message box when creating a trust
• Remanence of Analog memory not active per default
• No changes warning when trying to save to Miniserver and there are changes for a Trust
• BG-I31938 Statistics sent to app contain a duplicate entry on month change
• Text Inputs can’t be set via post webservice
• Touch Pure Flex LiveView cannot properly display ° sign
• BG-I31936 Config Tooltip shows device as offline when it just has come back online
• BG-I31982 T5 causes a new edge when closing view after controlling it via LiveView
• BG-I31979 State Text condition not working when a text is set
• BG-I31852 Renaming Intercom Gen.1 with a number does not work
• Spread up send of statistics mail among Miniservers so that not all send at the same time
• BG-I31957 Connecting with dns.loxonecloud.com/{serial} as address throws an error
• BG-I20837 Internorm analogue sensor shown as if correction is active in LiveView
• BG-I31936 Config Tooltip shows device as offline when it just has come back online
• BG-I32342: Home Connect added logging for rate limiting errors
• Fire- / Wateralarm has statistics setting
• BG-I32414: Device Status set default focus to search bar
• Door and Window Monitor invalid text at output Txu
• Logging properties not shown when control has a referenced device
• BG-I32084: Windows & Status Monitor Wrong states when references from client were used
• BG-I32484: Touch Pure Flex brightness is disabled as soon as actor is used in visualization
• Presence detection tracker entry not clear enough when started by app
• Missing texts for new inputs of Window and Window Central
• HTTP Query parameters do not work over WebSocket, causing logout of app
• BG-I32840: Project Validation Statistic entries not used in calculation when connected to Gen.2 Miniservers
• BG-I32735 prevent insertion of TAB characters in System Scheme
• BG-I32991: slow config performance when rebuilding connection flags
• BG-I32805: Password quality check in Loxone Config shows green if the username appears in password
• BG-I32455: Wallbox Manager no target power on Wallbox, if Wallbox and Wallbox Manager on different clients
• Valve Tree does not update its hardware version when it’s learned in by entering the serial manually
• FTP server fails to start on Miniserver Gen.2 when certificate setting is invalid
• BG-I32875: Device status shows new icon for old valve actuator
• Exo Database Connector: Allow Api-Actor on client Miniservers
• BG-I32959: Air Sensors maximum button press duration has no effect
• Tree tooltip shows device as offline even when being online
• BG-I32711: Device Status invalid last receive time of air devices when refreshing status
• Device Status Dialog showed devices without online state as online
• BG-I32611: Hunter Douglas Gen.3 not working with alpha
• BG-I32426: Reference name not updated when function block name changed via App
• BG-I32540: Search for Config ID is now possible
• Fixed login for Admin-Interface
• Minutes Impulse not always triggered
• BG-I32651: Analog sensor completely yellow and no selection visible
• BG-I32331: Permissions of app connections get change when editing control in expert mode
• Device status: wrong icon from M-Bus Extension
• Schedule not immediately recalculated when operating mode changes
• BG-I31910: ESC key didn’t cancel loading of project from Exosphere properly
• BG-I28956: BACnet input reference can’t be copied

Lighting

• BG-I32299 Smart TW Dali actor shows not-supported fade rate in settings
• BG-I31870 Daylight Responsive Lighting step size can be larger than defined maximum steps
• BG-I31976 Light-Circuits configured as Switch are handled as analogue for connected Trackers, Loggers, …
• BG-I32485: Invalid description for XAL Luminaire head caption
• BG-I32922: XAL Light Air Invalid IO’s after converting document
• BG-I32411: Lighting Controller add scene name to RINFO-Command
• BG-I32548: Light Controller output 2C not working if Tdc = Mmd
• BG-I30183: DALI single actuator (not group) min dim level does not work as described

Climate

• BG-I32217 AC does not use adapted target temperature when Eh/Ec is active
• Intelligent Room controller doesn’t validate mode set by app based on capabilities
• BG-I32103 Heating and cooling control Calculation of visualization is not correct
• BG-I31770 Blocked Room controllers are not visible in Heating and Cooling Controller after reboot
• BG-I31959 Mode “Fixed Setpoint” reset after saving into Miniserver
• BG-I32073 Heating and Cooling Controller set to Auto via app does not adapt parameter-value
• BG-I31770 Blocked Room controllers are not visible in Heating and Cooling Controller after reboot
• BG-I32103 Heating and cooling control Calculation or visualization is not correct

Shading

• Automatic Shading new parameter ‘Rdd’ to enable reference drive for Complete Up ad Complete Down
  • Activate this parameter if you have special shades which need a reference drive down to fully close, often the case when the shades have different physical dead times for up and down
• Auto jalousie: change of sunshine state recognized with a delay
• BG-I32076: Automatic Shading goes back to shading position
• BG-I32394: Automatic Shading Motor lock duration (Mld) affects the same direction using Po/Pc

Devices

• Wallbox Tree/Air:
  • try using the workaround solution to wake up vehicles that have fallen asleep.
  • (Air): Wallbox Air not responding when not charging
• Touch Air
  • Sometimes not sending temperature/humidity
• Dimmer Extension
  • BG-I32029 Dimmer Extension restarts when there are unconfigured outputs
• RGBW Dimmer Air / Tree
  • Adapted dimming curve to old behaviour
• Touch Pure Air V3
  • improved sensitivity (BG-I30552, BG-I29663)
• Valve Actuator Gen.2 Air & Tree:
  • improved reference drive
  • fixed status led patterns
  • fixed input button handling on battery powered valve air
• AC Control Air
  • BG-I31531 & BG-I31561: Toshiba stuck in initialization sequence
• M-Bus Extension
  • BG-I30294: M-Bus device can’t be found
  • BG-I29380: M-Bus extension can’t find specific device
  • BG-I28704: M-Bus values are jumping
• Valve Actuator Air
  • BG-I32439, BG-I32313, BG-I31981: Poor air communication performance

Audio

• BG-I32277 Audio channels visible when using stereo group
• Off does not lock TTS
• BG-I32035 Forward Lock-State to app
• BG-I32341 Music Player shows Airplay/Spotifiy settings in Expert Mode when managed by Playergroup
• BG-I32340 Send Room Favourite Priority as individual command when changed via Expert Mode
• BG-I32162 Audioservers which will not allow pairing shown in search-dialog
• BG-I32036: Player Group Fix Setting for handling service by group not disabled when using master-client players
• Off Input of player was not correctly handled
• Event Playback was truncated in certain configurations
• Spotify gets distorted after approx. 4h playback
• LineIn gets out of sync over time
• Playback after Event was not correct, could show playing but was muted
• Migrated to newest library for playback & sync audio
• Soundsuit files are not deleted correctly from RAM disk leading to an out-of-memory condition
• Radio stations not correctly playing again after paused (SRF-3, maybe others too)
• LineIn stop when transit to Bluetooth
• Possible Remote Code Execution Vulnerability in the Communication between Miniserver & Audioserver
• Handle permanent Input on ‘Off’ for Audio Player, Audio Central, Audio Group fixed
  • When On, Playback and events were stopped
  • Services like Spotify connect, Airplay and Bluetooth are actively disconnected and disabled

Multiplicator

• BG-I32087 Trust IOs created in inheriting project inserted on wrong parent
• BG-I32086 Can’t permit users to Trust IOs

Diagnostics

• BG-I28670 Internorm Monitor does not display anything when button is pressed
• BG-I31864 Device information contains duplicate data

Gateway

• BG-I31560 Fetch of def.log from client via device status does not always work

Energy

• Spot Price Optimizer may use intervals further in the future instead of earlier ones when the price is the same
• BG-I32278 Wallbox Enable state and target power not correctly sent when managed by Wallbox Manager
• BG-I31135 Wallbox Meter reading input reset when receiving data from device
• BG-I30324 Default name for Total Meter of Power Supply & does not fit Control-name
• BG-I32480: Energy Flow Monitor Config dialog shows invalid items in rare cases

Auto Configuration

• BG-I32204 Humidity and CO2 does not get connected to IRC
• BG-I32381: Table lamp in Shading blocks
• BG-I32380: House in Deep Sleep and Party not creating mode

Trust

• App has no information when user was disabled by Trust source

Security

• Path Traversal in WebSocket allows access for authenticated users to system files

Stability

• BG-I32365 Config crash when searching for AC
• BG-I32041 Miniserver starts emergency program after a freshly formatted SD card
• BG-I32150 Miniserver has a watchdog reboot when flushing statistics (e.g. at midnight)
• BG-I32168 Config crash when creating Undo
• BG-I32173 Config crash after changing room
• Config crash when setting a serial which is already used
• BG-I31939 Config crash when window control is connected to IRC
• Config crash when setting a serial which is already used
• BG-I31939 Config crash when window control is connected to IRC
• BG-I32154 Config crash when changing IRC template
• BG-I32445: Safety reboot when Hint-Text contains %-characters
• BG-I32193: Miniserver watchdog reboot while statistics are fetched
• BG-I32733 fixed possible crash when opening System Schematic dialog
• BG-I32634: Config crash when starting update
• Send of statistics mail is now further spread to improve stability of send
  • Mail will be sent between 00:00 and 03:00 depending on Miniserver serial number
• BG-I32704: Miniserver reboot when alarm clock gets unlocked
• BG-I32549: crash when received data of HTTP input too large

Fixed 

General 

• Config crash when setting a serial which is already used 

• BG-I31936: Config Tooltip shows device as offline when it just has come back online 

• BG-I31939: Config crash when window control is connected to IRC 

• BG-I31770: Blocked Room controllers are not visible in Heating and Cooling Controller after reboot 

• BG-I31959: Mode “Fixed Setpoint” reset after saving into miniserver 

• BG-I32029: Dimmer Extension restarts when there are unconfigured outputs 

• BG-I32103: Heating and cooling control – Calculation or visualization is not correct 

• Adapted dimming curve of RGBW Dimmer Air & Tree to old behaviour 

• BG-I32154: Config crash when changing IRC template 

Fixed 

General 

• BG-I31056 Config crash when opening Multiplicator file with a deleted climate block
• BG-I31099 Miniserver reboot when dali group actor changes
• AC Unit Controller: Silent Mode not working when set to Off and AC is controlled by IRC
• BG-I31101 Wrong resolved address of Audioserver sent to the App resulting in slow connection process
• BG-I31223 Ac Control: do not cancel timers when ending silent mode
• BG-I31057 Racecondition in copying IRC data causing Config crash

New 

• OCCP Server Connector (Beta) 

• • Connect your Wallbox to a OCPP Server 

• • OCPP 1.6 & 2.0.1 supported 

• Renaming of some Climate Blocks: 

• • Climate Controller -> Heating and Cooling Controller 

• • Intelligent Temperature Controller -> Flow Temperature Calculator 

• • AC Control -> AC Unit Controller 

• A3D9-T1310 Heating and Cooling Controller new visualization 

• • API has been changed to match the API of the HVAC Controller 

• A3D9-T1282 Climate Controls: draw connection references for used energy sources 

• AC Unit Controller 

• • Connect to Intelligent Room Controller for a fully automated AC Unit 

• • Combine Multiple AC Unit Controllers on one AC Central Controller 

• • • Decides if indoor units should heat or cool 

• • A3D9-T1299 Added silent mode input 

• • A3D9-T1300 Added options to set power on values for Fan speed, airflow-direction and target temperature which are set when switching off 

• Intelligent Roomcontroller: 

• • A3D9-T1279 Add IO’s for CO2 & Humidity 

• • A3D9-T1280 Add Boost-output 

• • A3D9-T1281 New output “Os” for current temperature mode (Comfort, Eco, …) 

• • A3D9-T1277 Configurable single target temperature instead of separated heat/cool temperature 

• • A3D9-T1301 Adapted handling of excess heating or cooling 

• • Single Comfort temperature 

• • • Activate via setting and use one comfort temperature instead of two 

• • • Switching between heating and cooling happens when exceeding the set deviation 

• Spot Price Optimizer: 

• • Support for UK 30-minute epex market 

• • Minutes since midnight for which the price is calculated now available in formula 

• A3D9-T1269 New Control: Binary Encoder 

• A3D9-T1225 New Control: Dewpoint Calculator 

• A3D9-T1223 New Control: Value Validation 

• Binary Decoder 

• • Values > 255 handled incorrectly (always all outputs enabled instead of relevant bits) 

• • Now supports up to 32-bit values 

• Heating and Cooling Controller: Possibility to use the outdoor temperature forecast instead of the past average 

• HVAC Controller: Use of outdoor temperature can be changed (Average past or future 48h) 

• A3D9-T990 System Schematics: extended functionality 

• • Support for text-only objects 

• • Possibility of fixed sized objects 

• Valve Actuator Air V2: learn mode deletes reference data, new reference is triggered. Help to fix BG-I30217 

• A3D9-T1275 added system variable for highest active system status severity 

• BG-I27513 Managed Tablets: Disable monitoring of battery level 

• BG-I30332 Project Planning: PWM Channels for different rooms now share channels on RGBW Dimmers when using Tree RGBW Dimmer 

• • When using Compact or Air RGBW dimmers each room will still get an individual dimmer 

• A3D9-T1245 Added support for weather/hazard warnings to weather server data 

• BG-I25077 RGBW Dimmer Air: Allow disable of LED on RGBW Dimmer Air 

• R20-T293 Presence Sensor Tree, Motion Sensor Tree, Room Sensor Tree: new blinking pattern (no blinking when learned in) 

• A3D9-T1174 Full System Backup 

• • System Backup now incorporates backups from all eligible devices 

• • Backup Dialogs in Config will now perform System Backup by default 

• • Exo Backup: will now perform System Backup 

• A3D9-T1253 added Command Recognition dialog (as used for HTTP VirtualIn) to Command Recognition block 

• EEBUS: Support for new Vaillant Firmware versions 

• Wallbox: 

• • A3D9-T1306 Added output Ssp session started pulse 

• BG-I29188 Touch Pure Flex Air+Tree: Added possibility to disable acoustic feedback 

• A3D9-T1305 Added possibility to easily set log level on plugins 

• • Same as for Miniserver: select plugin in document tree and open Debug Monitor Settings dialog from Diagnostics tab 

• • Currently only Exosphere Plugin is supported, other Plugins will follow in the future once they are updated 

• A3D9-T1208 Added Min/Max functionality to formula block 

• A3D9-T1270 Added the opportunity to paste lines and/or columns from another spreadsheet into a generic table and to copy a whole line with a context menu in the vertical header 

• BG-I30578 Added gold variants of some products 

• A3D9-T1227 Added Intercommunication Monitor (LAN & Tree intercommunication) 

• Project Planning 

• • A3D9-T1268 Added DMX devices 

• • A3D9-T1191 Added Option to plan Line Ins 

• A3D9-T1286 Audio Central & Group Fix: Cs input 

• A3D9-T1307 System variable for Expected Average Outdoor Temperature 

• Permission Selection Dialog: Automatically filter for objects used in visualization 

• A3D9-T1316 Output Txlt of Door and Window Monitor now displays the same text as the visualization 

• A3D9-T511 Added time function which gives the current week of the year 

• A3D9-T1304 Energy Meter Tree is now configured to be a bidirectional meter by default 

• A3D9-T1226 added usage references to operation mode tree entries 

• Permission Selection Dialog: Automatically filter for objects used in visualization 

Fixed 

General 

• BG-I29738 HTTP Virtual Input Command Recognition dialog failed when URL contained escaped slashes 

• BG-I29763 Audio Server HealthCheck: improved readability of results 

• BG-I29733 Message Center: links in messages couldn’t be opened in all cases 

• Exosphere: workaround for automatic logout from Exosphere (until server issue is fixed) 

• BG-I29761 added word wrap of text labels in Audio Server HealthCheck 

• BG-I29723 Actively communicating Tree-Extension shown as offline 

• BG-I29633 Status: Wrong result when text conditions were used with only analogue input connected 

• BG-I29642 Modbus: Sensor Limit for Modbus Extension not correctly calculated 

• BG-I29639 System Status: Not all system messages hidden when “Hide System status messages” was enabled 

• BG-I29305 Window Monitor: Linked objects with tracker generate tracker entries frequently 

• BG-I29039 Shading: could not be unlocked via App in some instances 

• BG-I28900 EnOcean: Config data not sent to Extension when learned in on Compact internal Link 

• BG-I27244 Showing errors Devices Offline 

• BG-I29798 App Branding can’t be retrieved from the Miniserver without authentication 

• Authentication NFC Code Touch did not display connector texts 

• Installation Place of Extensions not displayed in tree 

• Valve Actuator: Tree does not update when changing switchboard position 

• BG-I19412 SMTP Mailer: invalid order of header-elements when adding attachments 

• BG-I29790 Schedule analogue: Settings only available for schedule digital should be hidden 

• BG-I29671 Operating Time with easter-reference handled incorrectly in simulation 

• App Learning: replaced speaker shown as offline 

• BG-I29821 App Learning: Add Hardware Type to webservices 

• BG-I29824 Parts list: Products with different Variants (AC-Control, Energy-Meter, …) shown as single position 

• BG-I29853 Dali Air: Device not added when group caption is selected 

• BG-I29862 Mounting location sequence Stereo Extension 

• BG-I30335 M-Bus device primary address not visible 

• BG-I30279 Gate Controller: invalid state after reboot 

• Control History shows room not assigned 

• BG-I29807 Backup Window: Displayed date too short 

• BG-I30265 Status Monitor: Some texts not translatable 

• BG-I30295 System Variable Outside Temperature does not have full unit 

• BG-I29793 Intercom displayed offline when there is a Tree to Air Bridge on the Tree 

• BG-I30266 Missing translations in Monitor windows 

• IN1-I960 Tree device at Intercom Tree shown offline 

• BG-I30299 Tree Extension is not displayed in search result after saving to Miniserver 

• Adapted default polling cycle for 1-Wire and sample time of Mixing Valve Controller 

• Extension Learn Dialog: Always same Air channel is used for extensions 

• BG-I30215 Miniserver shortcut not shown as unconfigured when trust member gets deleted 

• Debug Monitor: Added CPU temperature (Supported for Miniserver Gen.2) 

• Air: Command is sent to wrong device after a device has been unpaired 

• BG-I30236 Learning Dialog: Identify learned device not sent after opening dialog with only one learned device 

• BG-I29918 NFC Learn Dialog: User description was used in combo box selection instead of username 

• BG-I29975 Project Validation: Wrong warning ‘Missing Object Connection’ when Hörmann Air is connected via API Connector 

• BG-I28836 DNS caching of loxonecloud.com addresses 

• Weather data not changed at the full hour 

• Network Device search: Result can’t be added when there is a different device with the same IP 

• BG-I30116 Users representing controls can be selected as user for plugins 

• BG-I29924 Gateway/Client: Actors can’t be switched due to broken programs 

• Disabled TLS renegotiations for TLSv1.2 and earlier 

• BG-I29734 Virtual Output: Test command with redirects not working properly 

• BG-I29867 HealthCheck Miniserver: check reachability of certificate server 

• BG-I30115 Part list shows music extension instead of speakers 

• BG-I30189 Access schedule empty after creating 

• BG-I29896 Fixed replacing Air-Devices via app 

• BG-I29053 Miniserver Compact: Update Samba to version 4.19.5 XSS validation for settings not working when injection is on first letter 

• BG-I29942 SD Format Dialog: Wrong error message when formatting SD card for Miniserver compact and there is a newer firmware available 

• BG-I28123 Home Connect: Slowed down initial requests to prevent rate limiting by API 

• BG-I29913 New Users can’t see any system status messages 

• BG-I29972 NFC Access doesn’t show proper name of Managed Tablet in history 

• BG-I30014 Virtual Input changes to analogue when connected to lighting controller 

• BG-I30037 Object (e.g. Virtual Input) does not get first free name since there is an input reference with the same name 

• Network Device Learning: No port appended, when hostname cannot be resolved, and device is replaced 

• BG-I29057 Window: Protection not executed when using Input TPos 

• BG-I29977 Xal Light Air: incorrect reference name 

• BG-I29745 User Management: Keycodes not applied on gateway-client 

• Updated Matter Plugin (0.4.0) with Matter SDK 1.3 

• BG-I29916 Modbus Monitor: Datatype for analogue sensor/actuator is empty 

• BG-I28312 No data on Modbus counter connected to Wallbox tree 

• BG-I29854 Statistic Dialog: Panning not working properly 

• BG-I29822 Auto Configuration: Audio not available in some cases 

• BG-I29863 Miniserver Gen.2 reuses old DNS resolves in some cases 

• BG-I29573 Auto Update can’t be downloaded 

• NFC does not stop learn mode if no stop command is received from app 

• BG-I30695 Custom System Message: Email notification is not always sent if severity is important or critical 

• Connect to Miniserver fails when username or password contains special characters 

• BG-I30672 Copying between projects does not recover central references 

• BG-I30571 Function blocks not selected when being right clicking 

• BG-I30558 Room and Category “do not use” set to not assigned when controls are copy pasted 

• BG-I30532 Plugin IOs can’t be used accross Miniservers in a Client/Gateway system 

• BG-I30334 API echo commands don’t work in all cases, depending on SPS order 

• BG-I30664 Miniserver shortcut shown as not fully configured 

• BG-I30605 AC Control has the wrong type set internally 

• BG-I30671 Blinds not closing or opening completely when type is set to roller blinds 

• BG-I30577 Added room and category in tooltip for central controlled blocks 

• BG-I30572 Adjusted the delay when filtering in a generic view table and when a button is clicked the correspondent row is selected 

• fixed incorrect column filter (for encrypted column) in Intercommunication monitor and learn-dialog 

• BG-I27855 Setting a timespan for a user in Loxone Config across a daylight savings change sets wrong time 

• Updated Table Lamp icon 

• BG-I30593 Gateway/Client: Event registrations get lost causing unexpected behaviour in e.g. central blocks 

• EEBUS: 

• • Names cannot be discovered on devices with new EEBUS configuration 

• • Added system message when EEBUS configuration changes and inputs can’t be subscribed anymore 

• Plugin communication sped up 

• BG-I30546 Fixed processing of text in sequence controller 

• Table Lamp Air: Confusing names for Smart Actuators  

• App Learning: Online status input does not have a name 

• BG-I30254 fixed invalid view state in many Config tableviews when opening ComboBoxes consecutively 

• BG-I24181 Miniserver and Miniserver Compact: Relays switching temporarily off when doing an update in some cases 

• Manual Connect to Miniserver fails when username or password contains special characters 

• BG-I30411 Energy Manager digital outputs can’t be inverted 

• BG-I30352 Lines of connection references show wrong colour 

• Miniserver closes websocket connection not correctly when user is blocked 

• BG-I30406 KNX actors overridden via LiveView not reset when LiveView is stopped 

• A3D9-T1147 Fixed difference of tooltip of connectors(directly on connector vs. in connection window) 

• R20-T293 Ceiling Light Tree: Added interaction counter in learn dialog 

• BG-I30347 Audio Device Search: devices cannot be replaced when maximum number of devices is reached 

• Expert Mode cannot be loaded if user has no permitted rooms 

• Link Diagnosis: no proper uptime directly after learning in device 

• BG-I30908 User Enabled From/Until timestamp can’t be set to midnight 

• BG-I30729 Printing to A1 paper size not working 

• Updated EEBUS Documentation (2.0.0) 

• System Schematic Dialog: fixed mishandling of visualization item selection 

• Operating mode references in document tree could be edited 

• BG-I30404 LiveView didn’t show corrected values for some analogue-out types 

• BG-I30850 client speaker search dialog didn’t show room and installation place of the searching device 

• BG-I30782 Modbus devices lost room when saving in MS 

• Air router functionality can be switched off for DALI Air devices 

• BG-I30553 Sequential Controller: Variables missing in remanence 

• Value Validator: remanence not restored 

• BG-I30576 Sequence Controller: add support for Automatic Designer 

• BG-I30575 Climate Controller dialog does not have table settings 

• BG-I30686 Air Valve: No proper unit set for output 

• BG-I30779 Intercom Search not possible when link is not used 

• BG-I30693 Modbus TCP analogue actuator now also executes his command on restart when nothing is connected 

• BG-I30717 fixed wrong text for end-search button in Intercommunication learn dialog 

• BG-I30703 prev/next buttons in MessageCenter detail view now follow the same ordering like in the overview table 

• BG-I30808 Opening context menu of multiple controls not working 

• BG-I23395 Modbus Actor gets stuck and does not change anymore 

• BG-I30830 Air device limit incorrect when learning via dialog 

• Power Supply & Backup: Online status Monitoring can’t be disabled 

• Support of DALI2 sensors with more than 7 DALI2 instances 

• BG-I28772 AAL Smart Alarm: Added Logging (select a Logger/Tracker in the settings of the function block, to get a log of the function block internals) 

• BG-I30623 SD Format runs out of system memory 

• BG-I30557 Abort of room change resets back to “Not assigned” when editing multiple objects 

• BG-I28751 Dali Device with address 0 occasionally starts flashing 

• BG-I30908 User Enabled From/Until timestamp can’t be set to midnight 

• BG-I30729 Printing to A1 paper size not working 

• Heating/Cooling Controllers: Adapted default temperature limit values 

• Miniserver Compact Update fails due to too less memory 

Devices & Extensions 

• Air Base Extension 

• • RDC for new Air transceiver 

• Tree to Air Bridge 

• • RDC for new Air transceiver 

• Dali Air  

• • BG-I29042 does not send all commands 

• • Fading time from the DALI Air Broadcast actor is not working when Standard actor is configured 

• Smoke Detector Air 

• • BG-I29917 Missing Alive Packets 

• • BG-I28426 going offline regularly 

• • BG-I24136 Low battery warning too late 

• AC Control Air 

• • AS1-T265 supports new Gree Protocol 

• • BG-I25269 Air/Spi Watchdog Resets fixed 

• • AS1-T310 enable new vane positions 1-5 for Gree 

• • BG-I29991 Fixed leaving pairing mode 

• • BG-I29465 Removed cyclic Messages “Power: Ein, Fehler: Aus” 

• Nano Dimmer Air 

• • BG-I8681 implemented check of zero crossing in self-test 

• • Touch module: touch timeout increased to 15 minutes 

• RGBW Dimmer Air  

• • BG-I24397 Calculation of colour temperature and brightness is now linear. Brightness is more consistent 

• • BG-I25077 Added follow up binary for status LED, fixed turning off/on of LED stripe when saving into MS 

• Touch Air 

• • Increased touch timeout to 15 minutes 

• • BG-I28671 Increased power consumption because of false wakeups 

• Window Handle Air 

• • BG-I29901 High Standby Current 

• Presence Sensor Tree 

• • BG-I29133 Always reports movement after power on reset 

• Tree Extension 

• • BG-I27154 LED state of Extension wrong after switching MS Compact Link to Tree 

• Table Lamp Air 

• • BG-I29919 offline status led color 

• • BG-I30620 touch/usb loader communication error 

• • BG-I30622 battery status not matching led status ring 

• XAL Light Air 

• • Motion detection after power on 

• Nano IO 

• • Improved air communication handling (BG-I26173) 

• Touch Air V2 

• • Improved communication handling, improved temperature sensor handling (BG-I30642) 

• Touch Pure Flex Air 

• • BG-I29641, BG-I28232 improvements to touch in battery mode  

Lighting 

• BG-I29702 Lighting Controller: wrong behaviour when “Met” controlled over a Virtual Input 

• BG-I29698 Lighting Controller: Mood “All On” not properly unmixed after presence  

• BG-I30598 Lighting Controller: Off via API command is handled like a command from app and does not trigger reset output 

Audio 

• BG-I29804 Audio Player still showing as unconfigured even when serials to devices have been entered 

• Audio Player: Source Change via T5 not shown in history 

• BG-I29893 Music Server: Doorbell event from Door controller not forwarded to Music Zone 

• BG-I29999 Music Server: Audio output disappears after separating the stereo outputs 

• Music Server: Group-Options not sent 

• BG-I29900 Audioserver does not know set unit for temperature 

• BG-I30162 Central Music: History Entries on Player not consistent when using multiple Audioservers 

• A3D9-T1188 Audioserver min version system message was triggered incorrectly for Audioservers on older, yet unsupported versions 

• Audio Player: Don’t trigger play of custom sound when text is empty 

• BG-I30424 Audioserver: invalid config json when using line-out on Audioplayer-Subwoofer-output 

• BG-I30756 Subwoofer not being recognized as master device 

• Audioserver: Error Messages via TTS are now disabled per Default 

Climate 

• BG-I29648 Intelligent Temperature Controller: Not activated when climate controller is in service mode 

• BG-I29749 Ventilation control cooling support not activated 

• BG-I30004 Intelligent Room controller: Excess Heating from Climate Controller applied in cooling mode 

• Intelligent Room Controller:  

• A3D9-T1295 Reduced movement-time for Valve-standstill (Vs) to 10 seconds 

• A3D9-T1296 Reduced number of valve-adaptions when using climate controller 

• BG-I30325 Building protection switched off after reboot while input is active 

• BG-I30455 Building protection activated in manual heating mode 

• BG-I30378 Ventilation Block: intensity and alert message (reason) don’t match 

• BG-I30418 Solar Controller wrong tank is selected when pump is already running 

• BG-I30843 Intelligent Room Controller: changed allowed deviation in single comfort temperature mode to 1.5° 

• Energy Management inputs of climate controllers hidden per default 

• BG-I30697 IRC controlled via Flex shows using surplus energy when mode is changed to fixed setpoint 

• BG-I26038 Intelligent Room Controller: showing lock state even for short pulse 

Shading 

• BG-I29190 Automatic Jalousie: incorrect positions after move commands 

• Attention: This may change movement behaviour of shades, which were not correctly setup 

• Invalid deadtimes used after small adjustments with Up/Dw 

• Dead times not properly calculated to actual positions 

• Invalid calculated position when using shade command 

• BG-I29872 Roof Window Shading: Active automatic not ended with window or protection 

• BG-I30293 Shading Block do a full drive with Po or Pc 

• BG-I30283 Automatic Shading: Sp goes On while the block is locked 

• Automatic shading: blinds not fully closing 

Energy 

• BG-I29792 Energy Meter Tree: Show System message if invalid direction is detected (1 Phase Meter) 

• Spot Price Optimizer per default automatically delete statistics 

• BG-I30211 Wallbox: output Cp not set when Energy Meter Tree is connected via API Connector in some cases 

• Energy Manager: Does not show as unconfigured when Grid power is not connected 

• Wallbox Manager: Strand power not correctly reduced when Wallbox is activated 

• BG-I30264 Power Supply & Backup: Outputs go to 0 during device startup 

• BG-I30402 Energy Meter Single phase + N: Name cannot be changed 

• BG-I30288 Energy Flow Monitor: Statistic interval of rest node can not be changed, the interval of the efm will now be used 

• BG-I30395 Wallbox Manager: charging would not start when minimum charging limit was set to 0 on Wallbox 

• BG-I30226 Wallbox devices were missing in Modbus Monitor filter selection 

Trust 

• BG-I30087 Trust User Transfer fails when user has the same name as a user representing a control 

• Trust error message when serial of Miniserver is changed always shows hint for member and for manager 

• Additional descriptions for Trust settings  

Multiplicator 

• Don’t save Multiplicator Password when saving project 

• BG-I30336 Miniserver version downgrade possible 

• BG-I30234 Config locks up when resetting object to Multiplicator default 

• Connect dialog does not use full remote address 

• BG-I30840 Reset of control does not work when it uses a control preset which is modified 

• Changes are not loaded from Miniserver when its currently not in the reachable state 

• Miniserver dialog now shows the version of the changes 

Project Planning 

• BG-I29881 PWM Spot created as Smart Actuator 

• BG-I29889 Lightgroups not created with proper name 

• BG-I29857 Added AC control Sinclair (100587) 

• BG-I29985 Error message when adding Install Sub 10 Clients 

• BG-I30019 Some countries have wrong audio preselection 

• Weather Station is set as source for sunshine system variable 

• BG-I28947 Updated tax rate of CHF to 8.1% (new tax rate since 01.01.2024) and fixed display of tax percentage (removed rounding) 

• Childs of object created without a room, resulting in an error message when starting auto configuration 

• BG-I30893 Wrong calculation when combining Master/Clients and Passive Speakers 

• Childs of object created without a room, resulting in an error message when starting auto configuration 

• Master Client is not the default decision 

• BG-I30834 Fails when using a Miniserver Compact 

Stability 

• Fixed Miniserver Gen1 crash when DALI Extension with firmware 15000325 is used 

• BG-I29856 Config crash when receiving Monitor data 

• BG-I29757 Config crash when configuring device 

• Miniserver reboot when reporting tree shortcut 

• Config crash when deleting Music Zone 

• Config crash when loading broken file from Miniserver 

• BG-I29440 Random Config crashes due to windows ui automation 

• BG-I29974 Config crash when editing rooms/categories while loading from Miniserver 

• Miniserver reboot when config is disconnected 

• Miniserver reboot when saving remanence of energy meter 

• BG-I30043 Miniserver reboot when having an unreferenced Audio Player with logic connected 

• BG-I30239 Config crash when inserting Belimo device 

• BG-I30276 Config crash when deleting devices while air diagnosis is opened 

• Config crash when inserting Smoke Detector Air 

• Config crash when loading defective program from Miniserver 

• BG-I30714 Config crash when restoring control presets of light controller 

• BG-I30670 Config crash while learning IR commands 

• BG-I30739 Config crash when starting Air diagnostics 

• Config crash when trying to learn more than 128 Air devices 

• Config crash when learning air device 

• BG-I30716 Config crash when deleting automatic rule 

• BG-I30826 Config crash after pasting controls 

• BG-I30906 Config crash when creating a connection from the Authentication function block 

• BG-I30897 Config crash when creating HVAC controller 

New 

• A3D9-T1330 Hunter Douglas Power View 3 Support 

• • Supports Hunter Douglas Gen. 2 and Gen. 3 

• • New Analog Output TPos (0..100) for Shading Block 

• A3D9-T1347: Ac Unit Controller: Added History 

• DALI Extension: DALI2 support for DALI Extension with HW Id 4 

• OCPP 

• • A3D9-T1344: Support for Sending Error Codes to Backend 

• • A3D9-T1339: Support for Reporting Wallbox Model properly 

• • A3D9-T1338: Support for Reporting Serial number and Firmware Version 

• • A3D9-T1337: Support for Remote Start/Stop Transactions 

• A3D9-T1320: Exo plugin v1.1.0 

• • Send control statistics to Exosphere 

• • “onboarding” from Config using provisioning code 

• A3D9-T1371 Setting icon for objects in periphery tree is now displayed instead of normal icon for better accessibility 

• Added Wever & Ducré Light Tree 

• A3D9-T1388: Audio Volume Fading 

• A3D9-T1250: Garage/Gate Central: Added “Partially Open” Input 

• A3D9-T1336: Audioplayer: Added Bluetooth pairing output 

• A3D9-T1335: Parameters can now be added as a Combo Box 

• A3D9-T1335: Changed Parameters to Combo boxes in some blocks 

• Gate controller Severity of system messages set to important so that a push will be sent 

• Valve Actuator Tree: new default operation mode: “gentle mode” 

• • If activated, the valve actuator moves to 5% instead of 0% to reduce wear, with every 20th command it will still move to 0% to prevent drift. 

• • Disabling this mode reverts the actuator to its original behaviour, where 0% commands result in 0% movement. 

• BG-I30796 NFC Code Touch Block: Deleting all entries is now possible 

• BG-I30795 NFC Code Touch Block: CSV Template now uses the time formats of system locale 

• Planning: 

• • Added new NFC Smart Cards 

• Added context menu to Health Check to select items in periphery tree 

• Auto Configuration 

• • Support for Hunter Douglas 

• A3D9-T1393: Message Center: showing recent messages with thumbnails and added possibility to delete messages 

• A3D9-I10: Audio Diagnosis performs basic network checks and serial verification for offline Audioservers 

Fixed 

General 

• Cloud Services are reported as inactive when request fails 

• Auto connect to Miniserver does not use addresses from project 

• BG-I31336 Virtual HTTP input can’t be fetched in config when using only a username and no password 

• Settings of Alarm Siren Tamper input not correctly set for new devices 

• Import of User can’t parse NFC tag when it contains quotes 

• Connection to Miniserver fails and no message is generated 

• Analog Sensor not directly displayed as offline anymore after a Miniserver restart 

• RC Key view dialog setting suggests editing 

• Miele token timeouts resulting in a re-login 

• NFC Codes stop working when updating from an older version 

• BG-I31023 OCPP Wrong formatting in Description of server address setting 

• BG-I30924: Fixed Config crash when creating Belimo Devices 

• BG-I25014: Missing/invalid entries in Belimo Monitor 

• BG-I31367 Gusts of weather service not working on client/gateway 

• BG-I31350 Add of Miniserver to a Gateway does not preselect an external address 

• BG-I27375 RS485 call command 

• BG-I25234 RS485 does not receive more than 512 characters 

• Row in Generic View (e.g. Miniserver search) shown as selected but not actually selected 

• BG-I31297 Periphery tree jumps when editing an item 

• BG-I31339 All Plugin actors (e.g. Home Connect) are set on a reboot instead of only the used ones 

• BG-I30868: Expert Mode: Users with direct access to control can’t select all available rooms 

• BG-I31149: Permission Dialog shows wrong data after changing room of control 

• BG-I30896: Automatic-Designer conditions for NFC-text outputs only triggered once 

• BG-I30928: Energy Meter Tree: Add sensor-information to tree monitor 

• BG-I31025 Virtual Input stayed red after changing Min/Max 

• BG-I31142 Central Controls: ‘Off’ in combination with DisPc permanently blocks configured controls 

• BG-I31196 Invalid or missing options for AC Unit Controller in automatic designer 

• BG-I31144 Equal block ON because of rounding error 

• BG-I30969 Too long control commands to a client may file (e.g. editing schedule block which is on a client) 

• Older version can’t be installed over newer version of Loxone Config 

• BG-I20283 Online status not monitored system message gets shown 

• BG-I30784 Monoflop getting stuck on On 

• BG-I30815 New documents don’t have country set, resulting in wrong preselected air channels 

• BG-I31100 Selection gets lost, when pasting multiple controls 

• BG-I31036 fixed slightly mismatching font-size between App and Config in system schematic 

• BG-I30976 ensuring that HTML entities are encoded to Unicode for display in MessageCenter 

• BG-I31037 System Schematics: fixed handling for moving of items and scrolling of view by keyboard 

• BG-I30382 Login with Loxone account in Config wasn’t possible if username/password contained ‘+’ sign 

• A3D9-T1331 Improved some bugs with the auto positioning 

• BG-I30786 Window Block not closing if Weather Protection input is on and miniserver restarts 

• BG-I30854 Fetch of backup file list from devices fails occasionally 

• Connection to Miniserver cant be established sometimes when connecting out of keychain 

• Invalid Jsons when values are invalid 

• Cloud Mailer continues to send emails despite quota already reached 

• OCPP 

• • Plugin has high memory usage 

• • NCF Authentication: new authorization request sent when another authentication is in progress 

• • Wallbox: not all states sent to Plugin after reboot 

• BG-I26940: Detailed Device Information for some AIR devices is not working 

• CloudDNS request is now done with HTTPS and in a more general manner 

• BG-I31630: Gate Controller has wrong options for type 

• BG-I31631: IRC is shown as unconfigured in project analysis when only AC Controllers are connected 

• BG-I31632: AC Central Controller is shown as an error in project analysis 

• BG-I31586: Automatic Designer: missing translations for Heating and Cooling Controller 

• BG-I31471: App Search tree: keep search results after automatic end of search 

• Miniserver configuration dialog shows wrong current address, when connected externally 

• BG-I31345: Certain values can’t be set via expert mode on some settings 

• BG-I31507: IR sensors can’t be controlled via LiveView 

• BG-I31346: System schematic has a visualization password setting 

• BG-I31523: NFC Tag not exporting when exporting users (only first tag will be exported) 

• Single click on text ‘Edit…’ in property window does not open the edit dialog 

• BG-I31399: Hörmann Air: Invalid visibility of travel duration parameters 

• BG-I31595: Config locks up when dragging a constant to a parameter 

• BG-I31599: Connecting from Miniserver Keychain does not use project data when internal and external address is empty 

• BG-I31375: Message Center view was incorrectly hiding some messages in some situations 

• Certificate fetch on Miniserver Gen.1 not retried fast enough 

• BG-I31658: Update of internal Audioserver on Miniserver Compact fails 

• BG-I31400: Normal Config search can’t find objects with diacritics 

• BG-I31667: ‘Delay after start’ setting is not used on Burglar alarm, when before the reboot a sensor was active 

• BG-I31757: Io names not displayed depending if the category or room is set 

• BG-I31761: Miniserver Replace does not properly create a backup anymore 

• BG-I25252: New-Device-Bubble in Gateway documents shows wrong or no data 

• User management dialog does not have a proper title 

• Tooltip in Tree does not always show a text when colour of item is not green 

• Selection in User management dialog jumps when a Username gets edited 

• Users and Groups in User management dialog not properly sorted 

• Dialog does not open centred on the screen 

• Connection reference shown as active, when connected to API output 

• Error message when saving to Miniserver 

• BG-I31707: MIN/MAX Commands not handled in Sequence Controller 

• BG-I31460: Miniserver search dialog showed encrypted Exo credentials, instead of asking user for master password for decryption 

• BG-I31483: items in system scheme view couldn’t be aligned properly after changing the scale of the image 

• Fixed data loss in interprocessor communication for Miniserver Go Gen2, Miniserver Compact, Miniserver Gen2 

• BG-I31615: Intercommunication learn dialog didn’t update count column on package reception 

Lighting 

• BG-I30183: DALI single actuator (not group) min dim level does not work as described 

• BG-I29018: DALI 8 fade rate jump not working with daylight control 

• BG-I28842: Dali lamp -> Online in the periphery tree Offline in the device status 

• BG-I28606: Device Status Dali Devices shown as offline 

• BG-I27520: Periphery Tree Dali Device shown with red dot 

• BG-I25345: Human Centric Lighting Dali DT8 parameter Ft causes last manual change to get stuck 

• BG-I25237: Dali offline device replace function 

• BG-I30304: DALI groups not working on firmware 15.0.3.25 

• BG-I29042: Dali Air does not send all commands 

• BG-I31569: Light controller displays no states after disconnecting output 

• Fixed Miniserver crash when DALI Broadcast Actor is used 

• Fixed DALI Min/Max brightness settings for Smart Actuators 

Planning 

• BG-I31275 Wrong Master/Client count calculated 

• BG-I31055 Energy Meter type for Wallbox Meter incorrect 

• BG-I31191 Power usage of extensions does not match datasheets 

• BG-I31251 Stereo Extension has a colour setting 

Stability 

• BG-I31377 Auto Save of project may interrupt opened dialogs 

• BG-I31477 Config crash when opening Backup/Update dialog 

• BG-I31391 Config crash 

• Config crash when loading Touch Pure Flex configuration 

• BG-I31360 Config crash when opening project 

• Config crash when connecting to Miniserver via search 

• Config crash when loading from Multiplicator Miniserver 

• BG-I31099 Miniserver reboot when Dali group actor changes 

• BG-I31056 Config crash when opening Multiplicator file with a deleted climate block 

• BG-I29486: Increased stability of Loxone Config when saving large project files 

• BG-I31626: Config crash when opening project 

• BG-I31705: Miniserver reboot when receiving text memory changes from another Miniserver 

• BG-I31228: Watchdog Reset while creating Backup via /dev/sys/createbackup 

Climate 

• AC Unit Controller Silent Mode overrides manual timer 

• AC Unit Controller timer not properly remanent 

• BG-I31459 Weatherserver does not have data anymore of previous hours (needed for weather data with absolute hour set) 

• Learning per default disabled on IRC but room presets overwrite that preset 

• BG-I31019 Flow Temperature Calculator not having a hysteresis for calculation with buffer temperature 

• BG-I31223 Ac Control: do not cancel timers when ending silent mode 

• BG-I31057 Fixed race condition in copying IRC data 

• BG-I31198 Intelligent Room controller: allowed Range for Input ϑExc not documented 

• BG-I31170 Mixing Valve Controller: improved description of Error-Output 

• AC Unit controller now has a settings-state for the app, which enables the app to faster display the settings page 

• AC Unit Controller: Silent Mode not working when set to Off and AC is controlled by IRC 

• Text in IRC dialog cut off 

• IRC is blinking when dragging an AC Control Air onto the page 

• BG-I31312: Remove cyclic mode message to device 

• BG-I31266: AC Control does not update IRC-Data after lock 

• BG-I31369: Hvac controller triggers prepare phase without excess heating/cooling 

• Intelligent Room controller: invalid target temperature when using excess heating/cooling in eco mode + Fahrenheit 

• Intelligent Room controller: Single comfort temperature not always converted to Fahrenheit 

• BG-I31581: Shown weather in the app starts at the start of the day instead of current time 

• BG-I31398: Fixed incorrect translation in Mode-dropdowns for Heating/Cooling Controller and AC Central 

• BG-I31686: Old weather entry is shown in the app 

• BG-I31381: Invalid Device type for AC Control Toshiba in device information response 

• BG-I31751: Heating & Cooling Controller / HVAC controller does not calculate average temperature when locked 

• BG-I31771: Intelligent Room Controller: expensive source used even if prioritized less 

• BG-I31628: AC Central Controller is wrongfully shown as cause in AC/IRC History 

• BG-I31719: AC Unit Controller: change on parameter not immediately applied 

Shading 

• BG-I30203: Invalid calculated position when using Nano2Relay 

• BG-I31123: Automatic Shading: Missing history-elements when calculating shading period 

• BG-I31378: Parameters don’t disappear anymore when shading type is changed 

Devices 

• Gentle Mode for Valve Tree only active if user hasn’t manually increased force 

• R20-T287 Dimmer Extension: Refactoring for better ZX Detection and more stable with ripple control signals 

• Relaxed Extension update error system message 

• Dimmer Extension adapted dim curve to older version 

Audio 

• Miniserver Compact Audio is shown as offline after a reboot 

• Compact Audio not shown as rebooting directly after a restart 

• BG-I31060 Setting “Automatic highpass-filter” not shown on Audioplayer when connecting Audioserver-Stereo-Output 

• BG-I31101 Wrong resolved address of Audioserver sent to the App resulting in slow connection process 

• BG-I31587: Permanent OFF of Audio Central not properly forwarded to Music Player 

• Music Player Group + Central Music: Volume command sent when saving into Miniserver 

Diagnostics 

• Modbus Monitor shows device ID 0 when server is offline 

• Select per default the Tree view in the Health Check 

• BG-I31048: No proper error message when air route could not be queried from Miniserver 

Gateway 

• Client shown as offline even if its back online again 

• BG-I31610: Can’t add client to gateway, when https is not working or disabled 

• BG-I31560: File fetch (e.g. def.log) from a client is rather slow 

Energy 

• BG-I31007 Spot Price Optimizer Cv Output is now rounded at 3 decimal places 

• The buffer target temperature offset ‘B’ now will be used as hysteresis 

• If the actual buffer temperature rises above the buffer target temperature (AQf + B) the pump (Qp) will be activated 

• If it falls below the target flow temperature (AQf) the pump will be deactivated again 

• BG-I30937 Wallbox2 Mr output not incremented after Energy Meter Tree wasn’t used anymore and only Cp Input is connected 

• BG-I30929 Energy Manager Output not being correctly displayed as Analog/Digital if Priorities are changed 

• BG-I30989 Load Manager Settings are not updated when operating mode is changed 

• BG-I31394: Wallbox Off input does not reset Cac output 

• BG-I31652: Wallbox2 standby consumption included in next charge 

OCPP 

• BG-I31193: OCPP Charging Session not resumed when charging allowed output of Wallbox was off 

• BG-I31473: OCPP EV Connection Timeout did not disable charging allowed on Wallbox 

• BG-I31472: OCPP local billing would get lost after “remote stop” was used 

• BG-I31197: OCPP Rejected authorization from OCPP when starting charging via App displayed wrong, local billing lost 

• OCPP connection to unsecure OCPP backend via ws:// not possible 

• OCPP Charging point would not connect if Wallbox function block had no Tree devices connected 

• OCPP Charging point would not pass Selfcheck in some cases 

• OCPP Suspended EV/EVSE not sent 

• OCPP Authentication after Miniserver reboot caused multiple authentication requests 

• OCPP Charging Point not displayed as dummy device in some cases 

• BG-I31535: OCPP Chargepoint API Connector does not automatically connect to Wallbox and Authentication NFC Code Touch function block 

• OCPP Meter values: Timestamp of meter value was sent instead of current timestamp which caused problems on OCPP backend 

• OCPP Reset: Charging station model and serial number not properly sent after soft and hard reset 

• OCPP Changing TxUpdateInterval not possible and changes not persistent 

• OCPP Transactions not restarted after power outage in rare cases 

Multiplicator 

• Client Miniserver can be added 

• BG-I31039 Trust search does not work externally 

• BG-I31745: Config crash when editing intercommunication setting 

Trust 

• BG-I31752: When trying to takeover users from Trust Manager, always Manager takeover is preselected 

BACnet 

• BG-I31382: Miniserver does not respond to requests on the devices BACnet port 

Auto Configuration 

• Undo not properly saved before doing Auto Configuration 

Home Connect 

• BG-I31527: Oven can’t be added when it does not support the preheating program 

• Slowed down requests when having a lot of devices, to prevent rate limiting by API 

Project Planning 

• BG-I30973 Master/Client not having a need for power 

• Plugin has high memory usage 

• NCF Authentication: new authorization request sent when another authentication is in progress 

• not all states sent to Plugin after reboot 

New 

• Loxone Exosphere Integration 

• • Upload your projects to the cloud 
  • Save Credentials to your Exosphere workspace and share them with your colleagues 

• Support for Master/Client Speakers 
• Dali Extension DALI2 support 

• • Only for certified Extensions 

• BG-T3186 Audio Player: Control History 
• A3D9-T1110: NFC Code Touch authentication method parameter 

• • The authentication method can be changed through this parameter via logic 

• Health Check for Audio 
• A3D9-T1193 Audio Player: Setting “Room favourite priority” 

• • If checked the Audio Player always starts with the first favourite 

• Multiplicator: Allow reset changes of a setting on all managed Miniserver with one action within edit dialog in Multiplicator project 
• Ventilation: Use a PI controller for CO2 control 

• • Parameters depending on room size 

• A3D9-T975 Energy Flow Monitor: Automatic Designer support 

• • supports conditions for grid power, production power, storage power and more. 

• A3D9-T1156 Wallbox Manager: more intelligent distribution 

• • Energy of not actively charging Wallboxes is allocated to other Wallboxes 

• New binary for Water Sensor Air and Door and Window Contact Air: display system message when button is stuck 
• A3D9-T1164 Wallbox Price Inputs 
• added webservice (/dev/sys/updatetolatestrelease) to update Miniserver to latest release 

• • A3D9-T1046 Window Handle: Tilt Position (Tilt Before Open) 
  • A3D9-T1076 Negation of digital Inputs 

• A3D9-T1155 Admin Password Reset Protection 

• • New Project Setting ‘Disable Password Reset’ that prevents resetting of admin password 

• BG-T3288 Autoconfig: Energy Improvements 

• • New Comfort Function for Energy Flow Monitor 

• • • Creates Energy Flow Monitor 

• • Meters are added 
  • Grid Meter is set to ‘Grid’ 
  • Wallbox meters are added 
  • Power Supply & Backups are added 

• Version 15 Splash Screen 
• Added button for manual connect to ribbon connect submenu 
• BG-I13568: RGBW Dimmer Tree is now able to be added to a lightgroup 
• Nano IO Touch V1: buttons can be pressed longer than 20sec 
• Ceiling Light Tree: different brightness sensors are supported 

Fixed 

General 

• Some texts in Project management View were not translated correctly 
• BG-I28145 System Schematic: dependency loop possible to configure where one system schematic uses the visualization of the other 
• BG-I28386 NFC Authentication: Off input does not reset all outputs 
• BG-I21712 Remanence: Remanence of T5 input was saved which caused Lighting Controller to change mood when saving into MS 
• BG-I23142 Climate Controller: Does not sort list with selected objects on top 
• Project Size calculation makes big jumps when adding many clients 
• System Status: Many changed events on gateway systems even if nothing has changed 
• BG-I28451 Watchdog Reboot while doing Miniserver backupBG-I28401 Device status: add “start diagnosis” for Tree2Air-Bridge 
• BG-I28247 Network Device Pairing: improved System-Message when encountering errors 
• BG-I28155 Gate Controller: renaming control does not rename referenced Hörmann-Device 
• BG-I28910 corrected misleading appearance of tabs user permissions dialog 
• BG-I28486 incorrect encryption column data and removed misleading error column in NFC monitor 
• BG-I28897 long startup time when Config tries to load backups stored on network drives 
• BG-I28583 possible deadlock in Matter plugin 
• BG-I25884: tree communication fixes when falsely connected 
• BG-I28523: Techreport starts orientation light 
• BG-I15326 Format Dialog close button is named “Cancel” after finishing a format 
• BG-I28963 Switching time can’t be edited with double click 

• BG-I28732 Managed Tablet dialog: Button text not translatable 
• BG-I28995 System messages: Added more info to entries in def.log (serial number, room) 
• Meters: Automatic statistic deletion enabled per default 
• BG-I18120 Copy-Pasting BACnet IO causes duplicate IDs 
• BG-I25288 & BG-I16183: SIA keeps old failed messages across sps restarts and continues to retry them 
• BG-I23285 RS232/RS485 learn dialog also adds checksums (if enabled) to the command recognition 
• BG-I28584 Systemstatus Dialog: read indicator incorrect when reopening dialog 
• BG-I29030 Threshold Switch: undefined behaviour when input value to large 
• BG-I28912 Display Settings: Status-text not shown in certain configurations 
• BG-I29109 Status Monitor: No text generated at output Txlc when logic block was connected 
• BG-I29024 Block History: Lock by user in App does not show the user 
• BG-I26201 “Device assigned” text on blocks with common Api connectors 
• BG-I26720 Operating times with / in name cannot be edited via app 
• BG-I29057 Window: Target position not updated during protection movement 
• BG-I29032 fixed cover page for DI Extension 
• BG-I28968 AC Control Air: Invalid Device Type in App-Search 
• BG-I27934 Print Document: page order of devices now represents order in tree 
• BG-I27085 Emergency/AAL Alarm: device name instead of sensor name used for text output 
• Digital Inputs: Inverted input text not marked red 
• BG-I28993 Status Monitor: Description text not used for function block history and Txlc output 

• BG-I28808 Status Monitor: App navigation not possible for objects connected to input ‘Stat’ without visualization enabled 
• Restricted Visualization: Attribute was not removed if object didn’t need it anymore  
• Exosphere: corrected mTLS connection handling 
• BG-I22854 Tree Extension: old popup message when activating tree intercommunication on dummy tree extension 
• BG-I28631 Miniserver Keychain: Credentials not saved when connected via Miniserver Search 
• BG-I28466 API/Webservices: /astate returned value from /state 
• BG-I28738 Status Monitor: Tlxc output used name of device instead of input 
• fixed crash learning multiple XAL devices 
• BG-I28740 Belimo Datapool device does not have unique connection ID 
• BG-I28749 Virtual input switches between analogue and digital after first connection 
• BG-I28773 DeviceStatus: Duplicate entries for Music Server Zones 
• BG-I27240 Property Window not updated after closing Intelligent Room Controller Dialog 
• BG-I27236 Expert Mode: user can move objects to rooms without permission 
• BG-I28473 Device command context-menu not available for Miniserver-Tree 
• BG-I28549 Sequence Control Dialog: Adapted Tab-size 
• BG-I28650 Cabinet of Tree Turbo cannot be used from Audioserver or Miniserver 
• BG-I28595 Device Status: removed context-menu “diagnosis” for single devices 
• BG-I24011 Text Generator: line breaks not properly set on output 
• BG-I28373 System Message: No message when automatic update fails 
• BG-I28441 Connect Miniserver: Wrong error message displayed because validity of Miniserver serial number not being checked 

• BG-I28571 Property Window: Editing Miniserver serial number of trust manager did not update serial number in trust section 
• BG-I28083 HTTP Monitor: some ok http codes marked red in monitor 
• BG-I28625 Status Monitor: deleting linked status monitor does not unlink from master 
• Status Monitor: unconfigured status incorrect in App 
• BG-I28325 Wrong page ordering after importing project 
• Wrong http return value for system status webservice when confirming custom system message 
• BG-I28539 Adding Miniserver as a client preselects an old address 
• Removed switch to program tree when searching via F5 
• BG-I29275 System Status: Historic Message is set to unread 
• Loading from Miniserver is slow when having a lot of system schematics 
• BG-I29471 Device Status has a slow performance and expands items which don’t have an error 
• BG-I28836 Push is sent delayed due to failing DNS resolves (Resolved IP is now kept updated) 
• BG-I29289 Alarm Clock: Alarm activates for past entries when operating modes change 
• BG-I29310 Alarm Clock: Tna output shows wrong time when next alarm is after a daylight savings change 
• BG-I29334 Monitors are not properly docked at the bottom of the config 
• BG-I28624: Door & Window Monitor Faulty app status on Client Gateway System when Gate or Window blocks are in use 
• BG-I29135: Intercom Search Dialog Configure device button enabled without search results 
• NFC Learn Dialog NFC Code Touch not preselected in certain cases 
• BG-I25498: NFC Learn: NFC Code Touch Air in battery operation doesn’t get learn mode packets 
• BG-I29346 Integrated shading: output set to 1.1 in config simulation 

• BG-I29285 Expert Mode: changes on input reverted when saving 
• BG-T2728 items are automatically collapsed in Device Status dialog 
• Client/Gateway: User update received via Trust sent via UDP to client resulting in a possible loss of the command 
• BG-I29092 HTTPS-Encryption: Removed unsecure TLS ciphers (TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 & TLS_DHE_RSA_WITH_AES_128_GCM_SHA256) 
• BG-I28803 Webservice fails when it contains certain text parts 
• BG-I29248 Property window scrolls up when saving project 
• BG-I27950 Intercom: Shift auto update time depending on SN when default is used 
• BG-I29632 Tree diagnostics skipped when Tree2Air was the only device on the tree branch 
• Virtual Text Input can’t be inserted on another Miniserver 
• BG-I29266 AirDiagnostics: fixed wrong webservice call for Tree2Air devices 
• BG-I29215 NFC learning dialog: added error dialog if NFC tag couldn’t be be learned encrypted 
• BG-I29297 Status Monitor: duplicate Virtual Input in visualization when connected and visualization turned on 
• BG-I29243 EnOcean: Extension from Clients not selectable in Learn Dialog 
• BG-I29128 Configure Miniserver: Miniserver related tabs excluded from dialog when opened from configuration tree  
• BG-I29159 Cover page: Relay extension not displayed correctly 
• BG-I29439 Tree Search: Hardware version missing 
• Config crash when updating periphery tree when there is a touch & grill 
• BG-I29547 User created via App can’t login on a Client 
• BG-I29527 Burglar Alarm: Remanence when alarm is triggered by single sensor 
• BG-I29434 Lines to nowhere when cutting & pasting control which uses API connector 

• BG-I28449 Tesla Powerwall uses imbalanced Meter reading calculation added info to documentation 
• BG-I29573 Error message during Auto Update process directly set to historic 
• PicoC: Serial stream not created when name is ambiguous 
• BG-I29227 Meter for Storage: Storage level missing in automatic designer 
• BG-I28702 Sorting: Options of combo box not correctly alphabetically sorted 
• BG-I28029 Miniserver Configuration: could be changed remotely when remote configuration was disabled 
• BG-I29509 Lumitech Standard actor: invalid value in liveview for certain colour-temperatures 
• BG-I29219 Belimo Devices: Merged to Parent if only a single device was used 
• BG-I29174 Easter Incorrectly set in PL-Calendar 
• Modbus 

• • BG-I26875 Modbus sensor unable to be read as digital 
  • BG-I27973 Modbus RTU Function 15 not working 
  • BG-I28170 Modbus RTU sending, but unable to receive 
  • BG-I28695 Modbus Test Command 

• BG-I28843 Device Status: Diagnosis button does nothing when there is no item in the tree is selected 
• BG-I29241 Automatic Designer: Objects with room/category ‘do not use’ are not shown in dialog 
• BG-I22809 Changed ‘Allow password edit’ right of a user via app is not properly loaded from Miniserver 
• BG-I29497 Managed Tablet not shown with proper name in control history on gateway client system 
• BG-I29507 Learning Dialog shows no columns 
• BG-I29311 Dali Fade Rate setting has a misleading description 

• BG-I24495 Automatic Designer rule is triggered when saving to Miniserver on a client gateway system 
• BG-I29549 Remove Support community button from ribbon since it’s not valid anymore 
• BG-I29521 Monoflop: Remanence not working when time parameter is set via logic 
• BG-I29554 Connection references in a gateway system result in name in the visualization including the abbreviation 
• BG-I29619 Connect to new Miniserver preselects wrong address 
• BG-I29308 Miniserver thinks that Air device is asleep after keeping it awake via Device Status in some cases 
• BG-I29117 Config Auto Connect: uses external connection instead of internal in some cases 
• Display of device Tree View in HealthCheck dialog 

Devices & Extensions 

• Touch Pure Air 

• • BG-I24686 incorrect temperature/humidity measurement 

• Touch Pure Tree 

• • internal improvements for error handling 
  • BG-I28530: false clicks during tree diagnosis 
  • BG-I29208 Webservice setting error 

• Touch Tree 

• • Buzzer sound reverted to last release version 
  • fix for old touches not reacting anymore 
  • BG-I29208 Webservice setting error 

• Touch Pure Tree CO2 

• • internal improvements for error handling 
  • BG-I29208 Webservice setting error 

• Valve Actuator Air V2 

• • learn button for 15sec active after power reset instead of 5, other various improvements 

• Valve Actuator Tree 

• • BG-I26764 hardware error not shown in system status 

• AC Control Air Firmware: 14.07.02.09 

• • BG-I26759 Mitsubishi Electric supports Aircons with different baud rate 
  • BG-I25684 Daikin P1P2 vane position would affect fan speed when set to 0 
  • Mitsubishi Heavy Industries force temperature range 

• Nano IO Air  

• • BG-I26173 goes offline sporadically 

• Touch Surface Air 

• • BG-I23268 no click sounds on T6 when LEDs aren’t visible 
  • BG-I20671 visual feedback in calibration dialog not working 

• KNX Extension  

• • BG-I27277 it’s possible to add more than 500 actors/sensors by cut/paste 

• XAL Light Air 

• • fix for device feature readout 

• M-Bus 

• • BG-I27408 M-Bus device Techem Type 4.1.1 can’t be learned in 

• Windows Handle Air V1  

• • BG-I25470 Closed position “up” functions the same as “down” 

• Nano DI Tree 

• • general communication improvements 

• Presence Sensor Tree 

• • PIR sensitivity settings improved 
  • BG-I28540/BG-I25543 implemented additional brightness value check to prevent excessive sending of brightness values 

• Presence Air 

• • BG-I25344 Sensor not reacting during overrun time leading to sending of inactive even though motion is present 
  • BG-I24985 Device sending move is active while being kept awake 

• Analog Out Extension:  

• • BG-I17291 Sporadic change of output range 

• RGBW Dimmer Tree:  

• • BG-I24397 Calculation of colour temperature and brightness values has been changed to a linear approach 
  • BG-I18960 Firmware has been adapted, that the initial output state of the LED pins is disabled 

Energy 

• BG-I24212 Energy Manager: not marked unconfigured when no valid load was defined 
• BG-I21676 Energy Manager: Minimum state of charge change in App doesn’t update in Config 

• Wallbox: Remanence not used for target power of manual mode 99 
• BG-I29033 Wallbox Manager has statistics activated by default even if it has none 
• BG-I29326 Wallbox Manager: Wrong calculation during phase switch of wallbox 
• BG-I29185 Spot Price Optimizer: Negative values do not work in simulation 
• BG-I29124 Wallbox Manager: Wallbox can no longer be added if previous Wallbox Manager was deleted in some cases 

Trust 

• BG-I28315 Local admin does not see any objects in visualization 
• BG-I28570 Trust: Custom change after replacing trust manager leads to config crash 
• BG-I28413 Replace Miniserver Dialog: Trust Manager serial number not adapted 
• BG-I29165 Trust: Same user multiple times in project 
• Trust added logging to def.log when User management data update was not sent to another member 
• Added retry when update of user management data fails 

Auto Configuration 

• BG-I28771 Incomplete ToDo for power failure operating mode 
• BG-I29022 Adapted tooltip for Audio-Column 

Project Planning 

• BG-I28908 Added tooltip for installation location describing the creation of lighting groups for light products 
• BG-I28543 Damper has invalid name 
• BG-I29510 Project Planning: PWM channels with different names create additional dimmers 

Climate 

• BG-I27790 Intelligent Room Controller: Initial value for ϑch / ϑcc not adapted for touch flex when changed via app 
• BG-I27886 Intelligent Room Controller: fixed setpoint not resetting after manually cancelling timer 
• BG-I28615: Intelligent Room Controller: valve output reduced when reaching heat protection temperature 
• BG-I29235 Intelligent Room Controller: Removed Climate controllers are not unregistered 
• BG-I29360 Climate Controller programmed on Gateway doesn’t see IRC blocks programmed on Client 
• BG-I29191 Intelligent Room Controller: Outputs shortly set to 100% on startup 
• BG-I29322 Climate Controller: always use current outdoor temperature as “average” in config simulation 
• BG-I29557 Locked Intelligent Room controller activates Climate Controller on Startup 
• BG-I29121 Intelligent Room Controller changing to fix target value causes invert of actual mode 

Lighting 

• BG-I28860 Lightcontroller: incomplete history-entries created by central-block 

Audio 

• BG-I28407 Audio Player: Music is not stopped after Event when input “Off” is active during Event 
• BG-I28511 Audio Player: invalid “off” command after multiple bell events 
• BG-I28527 Audio Group Fix und Central: V+ output not triggered 
• BG-I28408 Audio Group Fix + Central Music: Added Parameter Double-Click-Time (Tdc) 
• Music Extension: Temperature Shutdown sensor by CPU overtemperature reset by AMP thermal protection 
• Audioserver: “Separate Stereo Output” enabled for Line-In and SPDIF channels 
• BG-I23372 Audioserver Search Dialog Columns order not correct 
• BG-I28745 Audio Central doesn’t forward TTS events to Music Server zones 

• BG-I28724 Audio Player: TTS not executed when text contains ‘/’ 
• BG-I23450 Audio Player: default room is only respected for first block when inserting multiple outputs unto the page 
• BG-I28780 Double klick on Audio Player Fixed Group’s inputs V+ and V causes pulses on Audio Player’s outputs V+ and V- 
• BG-I28850 Audio Central/Audioplayer group fix: Add property “ignore room off gesture” 
• BG-I28826 Audio Fixed Group Input Off does not stop Player after Event 
• BG-I28693 Missing Documentation for Stereo Extension 
• Split Audio Outputs cannot be assigned a speaker type 
• BG-I28994 Stereo Extension: System message does not contain serial number or room 
• BG-I23449 Stereo Extensions not sorted alphabetically 
• BG-I23436 Stereo Extension search: enable continuous search 
• BG-I29225 Audio Player: Update Player names after Expert Mode / Visu changes 
• BG-I29186 Audio Fixed Group: LineIn not forwarded to players 
• BG-I29083 Audioserver: Miniserver tries to send grouped command while websocket is not connected 
• BG-I29497 Audio Player History shows room next to Audioserver 
• BG-I29559 Audio Central doesn’t show TTS input when linked to a MuS zone 

Diagnosis 

• Diagnosis Miniserver: Skip Internet-check if configured in system variable 
• BG-I28437 HealthCheck: stops on empty Air-Base 

Multiplicator 

• Trust users have duplicates in programs with different permissions 
• BG-I27963 Changes in Logger/Mailer/Tracker settings not serialized 
• BG-I29470 Can’t add more than one API actor reference 
• BG-I29258 Assigning NFC or code to user is not serialized 

Gateway/Client 

• BG-I28623 Gate Central can’t control gates on a client when it’s also used in door and window monitor 

Stability 

• BG-I28537 Config Crash when cancelling diagnosis 
• Fixed config crash when saving into gateway-client with trust users 
• BG-I28690 Config Crash: loading from Miniserver while Air diagnosis is running 
• BG-I28858 Config crash when opening a config file via file browser 
• BG-I29236 Config crash when running for a longer time 
• Config crash during Link Health Check 
• BG-I29645 Config crash when learning tree device 
• Miniserver reboot when accessing invalid object via serial stream in picoc 
• BG-I29517 Miniserver update fails due to less RAM 
• BG-I29604 Miniserver Gen.1 Watchdog reboots when having a lot of systemstatus entries as a client 

Fixed 

General 

• BG-I29798 App Branding can’t be retrieved from the Miniserver without authentication 
• BG-I29573 Auto Update can’t be downloaded 
• BG-I29863 Miniserver Gen.2 reuses old DNS resolves in some cases  
• NFC does not stop learn mode if no stop command is received from app 
• App Learning: replaced speaker shown as offline  
• BG-I29723 Actively communicating Tree-Extension shown as offline 

Climate 

• BG-I29749 Ventilation control cooling support not activated 

Audio 

• Music Player: Source Change via T5 not shown in history 

Stability 

• BG-I29757 Config crash when configuring device  
• Config crash when deleting Music Zone  
• Miniserver reboot when reporting tree shortcut  
• Fixed Miniserver Gen1 crash when DALI Extension with firmware 15000325 is used 

New 

• Loxone Exosphere Integration 

• • Upload your projects to the cloud 
  • Save Credentials to your Exosphere workspace and share them with your colleagues 

• Support for Master/Client Speakers 
• Dali Extension DALI2 support 

• • Only for certified Extensions 

• BG-T3186 Audio Player: Control History 
• A3D9-T1110: NFC Code Touch authentication method parameter 

• • The authentication method can be changed through this parameter via logic 

• Health Check for Audio 
• A3D9-T1193 Audio Player: Setting “Room favourite priority” 

• • If checked the Audio Player always starts with the first favourite 

• Multiplicator: Allow reset changes of a setting on all managed Miniserver with one action within edit dialog in Multiplicator project 
• Ventilation: Use a PI controller for CO2 control 

• • Parameters depending on room size 

• A3D9-T975 Energy Flow Monitor: Automatic Designer support 

• • supports conditions for grid power, production power, storage power and more. 

• A3D9-T1156 Wallbox Manager: more intelligent distribution 

• • Energy of not actively charging Wallboxes is allocated to other Wallboxes 

• New binary for Water Sensor Air and Door and Window Contact Air: display system message when button is stuck 
• A3D9-T1164 Wallbox Price Inputs 
• added webservice (/dev/sys/updatetolatestrelease) to update Miniserver to latest release 

• • A3D9-T1046 Window Handle: Tilt Position (Tilt Before Open) 
  • A3D9-T1076 Negation of digital Inputs 

• A3D9-T1155 Admin Password Reset Protection 

• • New Project Setting ‘Disable Password Reset’ that prevents resetting of admin password 

• BG-T3288 Autoconfig: Energy Improvements 

• • New Comfort Function for Energy Flow Monitor 

• • • Creates Energy Flow Monitor 

• • Meters are added 
  • Grid Meter is set to ‘Grid’ 
  • Wallbox meters are added 
  • Power Supply & Backups are added 

• Version 15 Splash Screen 
• Added button for manual connect to ribbon connect submenu 
• BG-I13568: RGBW Dimmer Tree is now able to be added to a lightgroup 
• Nano IO Touch V1: buttons can be pressed longer than 20sec 
• Ceiling Light Tree: different brightness sensors are supported 

Fixed 

General 

• Some texts in Project management View were not translated correctly 
• BG-I28145 System Schematic: dependency loop possible to configure where one system schematic uses the visualization of the other 
• BG-I28386 NFC Authentication: Off input does not reset all outputs 
• BG-I21712 Remanence: Remanence of T5 input was saved which caused Lighting Controller to change mood when saving into MS 
• BG-I23142 Climate Controller: Does not sort list with selected objects on top 
• Project Size calculation makes big jumps when adding many clients 
• System Status: Many changed events on gateway systems even if nothing has changed 
• BG-I28451 Watchdog Reboot while doing Miniserver backupBG-I28401 Device status: add “start diagnosis” for Tree2Air-Bridge 
• BG-I28247 Network Device Pairing: improved System-Message when encountering errors 
• BG-I28155 Gate Controller: renaming control does not rename referenced Hörmann-Device 
• BG-I28910 corrected misleading appearance of tabs user permissions dialog 
• BG-I28486 incorrect encryption column data and removed misleading error column in NFC monitor 
• BG-I28897 long startup time when Config tries to load backups stored on network drives 
• BG-I28583 possible deadlock in Matter plugin 
• BG-I25884: tree communication fixes when falsely connected 
• BG-I28523: Techreport starts orientation light 
• BG-I15326 Format Dialog close button is named “Cancel” after finishing a format 
• BG-I28963 Switching time can’t be edited with double click 

• BG-I28732 Managed Tablet dialog: Button text not translatable 
• BG-I28995 System messages: Added more info to entries in def.log (serial number, room) 
• Meters: Automatic statistic deletion enabled per default 
• BG-I18120 Copy-Pasting BACnet IO causes duplicate IDs 
• BG-I25288 & BG-I16183: SIA keeps old failed messages across sps restarts and continues to retry them 
• BG-I23285 RS232/RS485 learn dialog also adds checksums (if enabled) to the command recognition 
• BG-I28584 Systemstatus Dialog: read indicator incorrect when reopening dialog 
• BG-I29030 Threshold Switch: undefined behaviour when input value to large 
• BG-I28912 Display Settings: Status-text not shown in certain configurations 
• BG-I29109 Status Monitor: No text generated at output Txlc when logic block was connected 
• BG-I29024 Block History: Lock by user in App does not show the user 
• BG-I26201 “Device assigned” text on blocks with common Api connectors 
• BG-I26720 Operating times with / in name cannot be edited via app 
• BG-I29057 Window: Target position not updated during protection movement 
• BG-I29032 fixed cover page for DI Extension 
• BG-I28968 AC Control Air: Invalid Device Type in App-Search 
• BG-I27934 Print Document: page order of devices now represents order in tree 
• BG-I27085 Emergency/AAL Alarm: device name instead of sensor name used for text output 
• Digital Inputs: Inverted input text not marked red 
• BG-I28993 Status Monitor: Description text not used for function block history and Txlc output 

• BG-I28808 Status Monitor: App navigation not possible for objects connected to input ‘Stat’ without visualization enabled 
• Restricted Visualization: Attribute was not removed if object didn’t need it anymore  
• Exosphere: corrected mTLS connection handling 
• BG-I22854 Tree Extension: old popup message when activating tree intercommunication on dummy tree extension 
• BG-I28631 Miniserver Keychain: Credentials not saved when connected via Miniserver Search 
• BG-I28466 API/Webservices: /astate returned value from /state 
• BG-I28738 Status Monitor: Tlxc output used name of device instead of input 
• fixed crash learning multiple XAL devices 
• BG-I28740 Belimo Datapool device does not have unique connection ID 
• BG-I28749 Virtual input switches between analogue and digital after first connection 
• BG-I28773 DeviceStatus: Duplicate entries for Music Server Zones 
• BG-I27240 Property Window not updated after closing Intelligent Room Controller Dialog 
• BG-I27236 Expert Mode: user can move objects to rooms without permission 
• BG-I28473 Device command context-menu not available for Miniserver-Tree 
• BG-I28549 Sequence Control Dialog: Adapted Tab-size 
• BG-I28650 Cabinet of Tree Turbo cannot be used from Audioserver or Miniserver 
• BG-I28595 Device Status: removed context-menu “diagnosis” for single devices 
• BG-I24011 Text Generator: line breaks not properly set on output 
• BG-I28373 System Message: No message when automatic update fails 
• BG-I28441 Connect Miniserver: Wrong error message displayed because validity of Miniserver serial number not being checked 

• BG-I28571 Property Window: Editing Miniserver serial number of trust manager did not update serial number in trust section 
• BG-I28083 HTTP Monitor: some ok http codes marked red in monitor 
• BG-I28625 Status Monitor: deleting linked status monitor does not unlink from master 
• Status Monitor: unconfigured status incorrect in App 
• BG-I28325 Wrong page ordering after importing project 
• Wrong http return value for system status webservice when confirming custom system message 
• BG-I28539 Adding Miniserver as a client preselects an old address 
• Removed switch to program tree when searching via F5 
• BG-I29275 System Status: Historic Message is set to unread 
• Loading from Miniserver is slow when having a lot of system schematics 
• BG-I29471 Device Status has a slow performance and expands items which don’t have an error 
• BG-I28836 Push is sent delayed due to failing DNS resolves (Resolved IP is now kept updated) 
• BG-I29289 Alarm Clock: Alarm activates for past entries when operating modes change 
• BG-I29310 Alarm Clock: Tna output shows wrong time when next alarm is after a daylight savings change 
• BG-I29334 Monitors are not properly docked at the bottom of the config 
• BG-I28624: Door & Window Monitor Faulty app status on Client Gateway System when Gate or Window blocks are in use 
• BG-I29135: Intercom Search Dialog Configure device button enabled without search results 
• NFC Learn Dialog NFC Code Touch not preselected in certain cases 
• BG-I25498: NFC Learn: NFC Code Touch Air in battery operation doesn’t get learn mode packets 
• BG-I29346 Integrated shading: output set to 1.1 in config simulation 

• BG-I29285 Expert Mode: changes on input reverted when saving 
• BG-T2728 items are automatically collapsed in Device Status dialog 
• Client/Gateway: User update received via Trust sent via UDP to client resulting in a possible loss of the command 
• BG-I29092 HTTPS-Encryption: Removed unsecure TLS ciphers (TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 & TLS_DHE_RSA_WITH_AES_128_GCM_SHA256) 
• BG-I28803 Webservice fails when it contains certain text parts 
• BG-I29248 Property window scrolls up when saving project 
• BG-I27950 Intercom: Shift auto update time depending on SN when default is used 
• BG-I29632 Tree diagnostics skipped when Tree2Air was the only device on the tree branch 
• Virtual Text Input can’t be inserted on another Miniserver 
• BG-I29266 AirDiagnostics: fixed wrong webservice call for Tree2Air devices 
• BG-I29215 NFC learning dialog: added error dialog if NFC tag couldn’t be be learned encrypted 
• BG-I29297 Status Monitor: duplicate Virtual Input in visualization when connected and visualization turned on 
• BG-I29243 EnOcean: Extension from Clients not selectable in Learn Dialog 
• BG-I29128 Configure Miniserver: Miniserver related tabs excluded from dialog when opened from configuration tree  
• BG-I29159 Cover page: Relay extension not displayed correctly 
• BG-I29439 Tree Search: Hardware version missing 
• Config crash when updating periphery tree when there is a touch & grill 
• BG-I29547 User created via App can’t login on a Client 
• BG-I29527 Burglar Alarm: Remanence when alarm is triggered by single sensor 
• BG-I29434 Lines to nowhere when cutting & pasting control which uses API connector 

• BG-I28449 Tesla Powerwall uses imbalanced Meter reading calculation added info to documentation 
• BG-I29573 Error message during Auto Update process directly set to historic 
• PicoC: Serial stream not created when name is ambiguous 
• BG-I29227 Meter for Storage: Storage level missing in automatic designer 
• BG-I28702 Sorting: Options of combo box not correctly alphabetically sorted 
• BG-I28029 Miniserver Configuration: could be changed remotely when remote configuration was disabled 
• BG-I29509 Lumitech Standard actor: invalid value in liveview for certain colour-temperatures 
• BG-I29219 Belimo Devices: Merged to Parent if only a single device was used 
• BG-I29174 Easter Incorrectly set in PL-Calendar 
• Modbus 

• • BG-I26875 Modbus sensor unable to be read as digital 
  • BG-I27973 Modbus RTU Function 15 not working 
  • BG-I28170 Modbus RTU sending, but unable to receive 
  • BG-I28695 Modbus Test Command 

• BG-I28843 Device Status: Diagnosis button does nothing when there is no item in the tree is selected 
• BG-I29241 Automatic Designer: Objects with room/category ‘do not use’ are not shown in dialog 
• BG-I22809 Changed ‘Allow password edit’ right of a user via app is not properly loaded from Miniserver 
• BG-I29497 Managed Tablet not shown with proper name in control history on gateway client system 
• BG-I29507 Learning Dialog shows no columns 
• BG-I29311 Dali Fade Rate setting has a misleading description 

• BG-I24495 Automatic Designer rule is triggered when saving to Miniserver on a client gateway system 
• BG-I29549 Remove Support community button from ribbon since it’s not valid anymore 
• BG-I29521 Monoflop: Remanence not working when time parameter is set via logic 
• BG-I29554 Connection references in a gateway system result in name in the visualization including the abbreviation 
• BG-I29619 Connect to new Miniserver preselects wrong address 
• BG-I29308 Miniserver thinks that Air device is asleep after keeping it awake via Device Status in some cases 
• BG-I29117 Config Auto Connect: uses external connection instead of internal in some cases 
• Display of device Tree View in HealthCheck dialog 

Devices & Extensions 

• Touch Pure Air 

• • BG-I24686 incorrect temperature/humidity measurement 

• Touch Pure Tree 

• • internal improvements for error handling 
  • BG-I28530: false clicks during tree diagnosis 
  • BG-I29208 Webservice setting error 

• Touch Tree 

• • Buzzer sound reverted to last release version 
  • fix for old touches not reacting anymore 
  • BG-I29208 Webservice setting error 

• Touch Pure Tree CO2 

• • internal improvements for error handling 
  • BG-I29208 Webservice setting error 

• Valve Actuator Air V2 

• • learn button for 15sec active after power reset instead of 5, other various improvements 

• Valve Actuator Tree 

• • BG-I26764 hardware error not shown in system status 

• AC Control Air Firmware: 14.07.02.09 

• • BG-I26759 Mitsubishi Electric supports Aircons with different baud rate 
  • BG-I25684 Daikin P1P2 vane position would affect fan speed when set to 0 
  • Mitsubishi Heavy Industries force temperature range 

• Nano IO Air  

• • BG-I26173 goes offline sporadically 

• Touch Surface Air 

• • BG-I23268 no click sounds on T6 when LEDs aren’t visible 
  • BG-I20671 visual feedback in calibration dialog not working 

• KNX Extension  

• • BG-I27277 it’s possible to add more than 500 actors/sensors by cut/paste 

• XAL Light Air 

• • fix for device feature readout 

• M-Bus 

• • BG-I27408 M-Bus device Techem Type 4.1.1 can’t be learned in 

• Windows Handle Air V1  

• • BG-I25470 Closed position “up” functions the same as “down” 

• Nano DI Tree 

• • general communication improvements 

• Presence Sensor Tree 

• • PIR sensitivity settings improved 
  • BG-I28540/BG-I25543 implemented additional brightness value check to prevent excessive sending of brightness values 

• Presence Air 

• • BG-I25344 Sensor not reacting during overrun time leading to sending of inactive even though motion is present 
  • BG-I24985 Device sending move is active while being kept awake 

• Analog Out Extension:  

• • BG-I17291 Sporadic change of output range 

• RGBW Dimmer Tree:  

• • BG-I24397 Calculation of colour temperature and brightness values has been changed to a linear approach 
  • BG-I18960 Firmware has been adapted, that the initial output state of the LED pins is disabled 

Energy 

• BG-I24212 Energy Manager: not marked unconfigured when no valid load was defined 
• BG-I21676 Energy Manager: Minimum state of charge change in App doesn’t update in Config 

• Wallbox: Remanence not used for target power of manual mode 99 
• BG-I29033 Wallbox Manager has statistics activated by default even if it has none 
• BG-I29326 Wallbox Manager: Wrong calculation during phase switch of wallbox 
• BG-I29185 Spot Price Optimizer: Negative values do not work in simulation 
• BG-I29124 Wallbox Manager: Wallbox can no longer be added if previous Wallbox Manager was deleted in some cases 

Trust 

• BG-I28315 Local admin does not see any objects in visualization 
• BG-I28570 Trust: Custom change after replacing trust manager leads to config crash 
• BG-I28413 Replace Miniserver Dialog: Trust Manager serial number not adapted 
• BG-I29165 Trust: Same user multiple times in project 
• Trust added logging to def.log when User management data update was not sent to another member 
• Added retry when update of user management data fails 

Auto Configuration 

• BG-I28771 Incomplete ToDo for power failure operating mode 
• BG-I29022 Adapted tooltip for Audio-Column 

Project Planning 

• BG-I28908 Added tooltip for installation location describing the creation of lighting groups for light products 
• BG-I28543 Damper has invalid name 
• BG-I29510 Project Planning: PWM channels with different names create additional dimmers 

Climate 

• BG-I27790 Intelligent Room Controller: Initial value for ϑch / ϑcc not adapted for touch flex when changed via app 
• BG-I27886 Intelligent Room Controller: fixed setpoint not resetting after manually cancelling timer 
• BG-I28615: Intelligent Room Controller: valve output reduced when reaching heat protection temperature 
• BG-I29235 Intelligent Room Controller: Removed Climate controllers are not unregistered 
• BG-I29360 Climate Controller programmed on Gateway doesn’t see IRC blocks programmed on Client 
• BG-I29191 Intelligent Room Controller: Outputs shortly set to 100% on startup 
• BG-I29322 Climate Controller: always use current outdoor temperature as “average” in config simulation 
• BG-I29557 Locked Intelligent Room controller activates Climate Controller on Startup 
• BG-I29121 Intelligent Room Controller changing to fix target value causes invert of actual mode 

Lighting 

• BG-I28860 Lightcontroller: incomplete history-entries created by central-block 

Audio 

• BG-I28407 Audio Player: Music is not stopped after Event when input “Off” is active during Event 
• BG-I28511 Audio Player: invalid “off” command after multiple bell events 
• BG-I28527 Audio Group Fix und Central: V+ output not triggered 
• BG-I28408 Audio Group Fix + Central Music: Added Parameter Double-Click-Time (Tdc) 
• Music Extension: Temperature Shutdown sensor by CPU overtemperature reset by AMP thermal protection 
• Audioserver: “Separate Stereo Output” enabled for Line-In and SPDIF channels 
• BG-I23372 Audioserver Search Dialog Columns order not correct 
• BG-I28745 Audio Central doesn’t forward TTS events to Music Server zones 

• BG-I28724 Audio Player: TTS not executed when text contains ‘/’ 
• BG-I23450 Audio Player: default room is only respected for first block when inserting multiple outputs unto the page 
• BG-I28780 Double klick on Audio Player Fixed Group’s inputs V+ and V causes pulses on Audio Player’s outputs V+ and V- 
• BG-I28850 Audio Central/Audioplayer group fix: Add property “ignore room off gesture” 
• BG-I28826 Audio Fixed Group Input Off does not stop Player after Event 
• BG-I28693 Missing Documentation for Stereo Extension 
• Split Audio Outputs cannot be assigned a speaker type 
• BG-I28994 Stereo Extension: System message does not contain serial number or room 
• BG-I23449 Stereo Extensions not sorted alphabetically 
• BG-I23436 Stereo Extension search: enable continuous search 
• BG-I29225 Audio Player: Update Player names after Expert Mode / Visu changes 
• BG-I29186 Audio Fixed Group: LineIn not forwarded to players 
• BG-I29083 Audioserver: Miniserver tries to send grouped command while websocket is not connected 
• BG-I29497 Audio Player History shows room next to Audioserver 
• BG-I29559 Audio Central doesn’t show TTS input when linked to a MuS zone 

Diagnosis 

• Diagnosis Miniserver: Skip Internet-check if configured in system variable 
• BG-I28437 HealthCheck: stops on empty Air-Base 

Multiplicator 

• Trust users have duplicates in programs with different permissions 
• BG-I27963 Changes in Logger/Mailer/Tracker settings not serialized 
• BG-I29470 Can’t add more than one API actor reference 
• BG-I29258 Assigning NFC or code to user is not serialized 

Gateway/Client 

• BG-I28623 Gate Central can’t control gates on a client when it’s also used in door and window monitor 

Stability 

• BG-I28537 Config Crash when cancelling diagnosis 
• Fixed config crash when saving into gateway-client with trust users 
• BG-I28690 Config Crash: loading from Miniserver while Air diagnosis is running 
• BG-I28858 Config crash when opening a config file via file browser 
• BG-I29236 Config crash when running for a longer time 
• Config crash during Link Health Check 
• BG-I29645 Config crash when learning tree device 
• Miniserver reboot when accessing invalid object via serial stream in picoc 
• BG-I29517 Miniserver update fails due to less RAM 
• BG-I29604 Miniserver Gen.1 Watchdog reboots when having a lot of systemstatus entries as a client 

New 

• Miniserver Shortcut function block 

• • Add a Shortcut to another Miniserver within the visualization  

• A3D9-T1036: Status Monitor 

• • Keep an eye on your devices, states, and values with our new generic monitoring block 

• Door And Window Monitor: 

• • Allow nesting of Door and Window Monitor objects 
  • Allow select of gate controller 

• Meter: Detection and prevention in invalid Meter Readings 

• • Decreases in the Meter Reading are not allowed anymore 
  • Major increases are detected 

• • • An invalid change is now detected when the single meter change is bigger than the current Meter Reading and bigger than 10000 

• • Only if the time difference since the last value change is smaller than 8h 
  • User will be informed via System Message 
  • System Message can be deactivated 

• Network Devices: Address Resolve Fallback 

• • If the Miniserver fails to connect to the defined hostname/address it will try to find the correct address by searching for the device in the network 
  • This enables a connection to the device even if the network settings were misconfigured 
  • Hostname entered but the device set to a static IP 

• • IP entered but the device has gotten a new IP via DHCP 
  • Supported on Miniserver Gen.2 for Loxone Network Devices (Audioserver, Intercom) 

• Added Portuguese 
• Loxone Config Instance handling 

• • When a config is already running double clicking a project file now will not start an additional instance of Loxone Config 

• NFC Authentication Block: Import NFC Tags and Access Codes from CSV 
• BG-I25937 Scene: Added LineIn action 
• BG-I27642 Burglar Alarm: add support for combined window contact 
• New Miniserver Connect Dialog 
• New Miniserver Keychain Dialog 
• A3D9-T1121 User Import: Import NFC Tags and Access Codes from CSV 
• Hardened security: Webservices need to be authenticated with a token with the proper rights, when a token is used 
• A3D9-T1085 Window: Added output for target position and input for current position (Can be used with Schüco Windows) 
• Matter (0.3.0) 

• • various fixes 
  • upgraded to Matter 1.2 

• M-Bus Device: Add sequence number property to analogue inputs 
• DALI extension firmware update DALI device types 0-6 support smart actors 
• A3D9-T1035 Automatic Designer: add action “Gate: partially open” 

Fixed 

General 

• Ac Control: Wrong type text used for gree/sinclair ac control 
• BG-I28029 Admin Interface reachable when configuring via Internet is disabled 
• BG-I27980 Central Shading: Safety-Reason for “Wa” not remanent 
• BG-I27953 Tree-Filter does not compare room/category names 
• BG-I28023 Network Intercommunication: Smart/T5-sensors not received when using encryption 
• BG-I27543 Tuneable white Dali dimmer is not working when the colour temperature is not used 
• Memory Leak when converting document 
• BG-I26050 Device learning dialogs: same device couldn’t be learned out and in again in the same learning session 
• BG-I26046 Saving project to Miniserver while device diagnostics were running left diagnostics in undefined state 
• BG-I28019 room settings (Combobox settings in general) didn’t work as expected in learning dialogs 
• BG-I27690 Devices with a single sub device were merged 
• BG-I27475 Documentation has missing descriptions for IOs 
• BG-I27693 Optical/Audible identify context menu action not disabled when not connected to the Miniserver 
• BG-I27761 Auto Connect to Miniserver does not properly use address settings from project as fallback 
• BG-I27687 Generic View Column filters not showing ampersands 
• BG-I27688 Unable to distinguish Miniserver captions in template insertion dialog 
• BG-I27834 Network device search uses full qualified hostname, this leads to problems when the domain changes 
• BG-I27722 Connection of memory flag gets lost when changing referenced object via settings 
• BG-I26559 External IO/Memory Flags are not sent to other Miniserver when value changes at SPS restart 

• Addon webservice does not check token rights 
• Tokens marked for deletion still work as Bearer Token for some time 
• An Error message is displayed when using multiple virtual UDP inputs with the same port, even if it does not cause any problems 
• BG-I27702 Ac Control Air Dialog: prevent unselecting all items 
• BG-I25264 Device learning dialogs: identify command was sent in too many situations (e.g. after editing of device properties) 
• updated Alexa (0.4.0) and Husqvarna (1.0.8) addons 
• BG-I27413 RS485 Extension shows device limitation 
• BG-I27462 PS & B not in a room from planning tool 
• BG-I27369 Sequence Controller does not output “%” sign 
• BG-I26196 Automatic designer: API connector not working 
• BG-I27739 Window remanence of current position not working 
• BG-I27739 Window has a remanence parameter 
• BG-I22821 Find and Replace All replaces goes through all objects twice 
• BG-I27551 Backup webservice uses too much RAM use SD card for storing files instead 
• Increased some font sizes 
• BG-I27442 Status: Output does not show all decimal places in LiveView/Simulation 
• BG-I27418 Project Backups don’t show full note if project path contains special characters 
• BG-I27507 Managed Tablet: Childs (e.g. Online status) don’t take over room of tablet 
• Virtual HTTP command recognition window cant retrieve data from Miniserver anymore 
• BG-I27506 Error output state of sensors/inputs not remanent 

• BG-I27552 Miniserver search: Increased minimum size for buttons 
• BG-I27553 Exchanged Miniserver search and keychain buttons 
• BG-I27227 KNX Monitor: showed wrong device name for extended actors in some instances 
• BG-I27227 LiveView: no yellow highlight for negative values on analogue sensors 
• BG-I26846 IO from another Miniserver controlled via LiveView shows wrong value after page change 
• Managed Tablets: Version not displayed in device status & battery level shown in red 
• Plugin mTLS authentication not working in some cases 
• BG-I27382 Window without text can be selected in the mode ‘Freely position windows’ 
• Program shown as not identical when loading from Miniserver 
• Plugin shown offline in device status 
• BG-I27378 Input references not always sorted in front of function blocks in the list which is handled by the SPS resulting in different behaviours depending on the insertion order 
• M-Bus Extension: devices show invalid secondary addresses starting with 7F:FF:FF:FF 
• BG-I23250 DALI light is turned WHITE and then RED and we send only RED to it 
• BG-I27323 Ac Control: AutoConnect for Temperature and Window Contact 
• BG-I27279 Tree-icon inverted in Device status & Quick search 
• BG-I27455 Unpair warning message is shown when deleting a trusted intercom 
• BG-I27456 Managed Tablet App Location Filter shows duplicate results 
• Disabling default software rendering (since it caused problems on some multi-monitor setups) 

• • can be reenabled with LX_SOFTWARE_RENDERING=1 env variable where needed 

• Miele@Home Update translationsBG-I28087 Wrong error message when trying to insert logger/mailer/caller on a different Miniserver 

• Config connects locally with the external address to the Miniserver if the internal address is missing in the Keychain 
• BG-I28117 Config Caption bar shows ‘connecting’ but it already has failed 
• Miniserver Backup via webservice fails due to watchdog timeout 
• Home Connect: Rate limit is hit when plugin starts 
• Removed preselection of save path when saving documents 

• • Hidden feature which leads to errors when project was copied 

• BG-I28187 Miniserver is unable to download auto update within the defined timeout of 3 minutes -> doubled the timeout 
• BG-I28130 Miniserver Keychain: Connect to remote connect Miniserver fails with error message 
• Read System messages not set to unread when being retriggered (e.g. Audioserver Spotify info messages) 
• BG-I28329 HealthCheck selection: remove option for MS-Gen1 Miniserver-Diagnosis 
• Device Status: Actions for tree-branches on client miniserver executed on wrong miniserver 
• BG-I28278 Miniserver-Diagnosis fixed typo when client miniserver is offline 
• BG-I28277 Link/Tree Diagnosis stuck when client miniserver is offline 
• BG-I28138 Managed Tablet is not shown with correct name in Control History 
• BG-I28293 Race Condition when starting update on different Miniservers in parallel, resulting in project mix-up 
• BG-I28274 No message when doing search & replace and text was not found 
• BG-I28230 Miniserver Connection: Wrong error message when Miniserver is registered but does not have Internet 
• Converted stored connection data is incorrect for Miniserver Gen.1 which use CloudDNS since it has stored an outdated resolved IP 
• BG-I28354 & BG-I28154 Intercommunication: Empty text or text starting with special characters not sent 
• BG-I28168 LiveView: Intercommunication T5 output can’t be switchedBG-I28148 Sequence Controller: focus lost when renaming variables/inputs/outputs 

• BG-I26198 Sequence Controller: changing variable name does not replace variables in all sequence pages 
• BG-I28318 Connection reference on math function block does not show a value in LiveView/Simulation 
• BG-I28384 Drag and Drop multiselection allows connection of an output to an input and vice versa 
• Possible queue overflows when sending messages to Link or internal Tree of Miniserver 
• BG-I28293 Race Condition when two configs save to a Miniserver in parallel 

Devices & Extensions 

• Nano Dimmer Air US  

• • BG-I27499 No system status message for short circuit  
  • Fix for production test 
  • System temperature is sent two times after startup 

• Extend air diagnosis on Door and Window Contact Air, Touch Air and NFC Code Touch Air 
• Dali 

• • DALI fading time bugfix for smart actuators 
  • BG-I23250 DALI light is turned WHITE and then RED and we send only RED to it 
  • DALI address 0 starts identifying when the DALI extensions is identified 
  • Reconnect to Audioserver after saving to Miniserver takes very long 

• BG-I27719 Touch Pure Flex: Long button press does not properly reset back to zero when releasing the button 
• M-Bus Extension: Do not monitor 8-bit M-Bus device status field due to a high number of false positives 
• Dali Firmware 14.07.02.08 

• • BG-I27853 fixed control of DALI actors 
  • Random DALI identify 

• Miniserver, Miniserver Go, Miniserver Compact coprocessor Firmware 14.7.2.14 

• • Fixed multiple routing of messages to Link interface 
  • Fixed initialization of internal Tree 
  • Improved error statistics 

• Tree Extension Firmware 14.7.2.14 

• • Fixed multiple routing of link legacy packets causing lost packets under high bus load 
  • Fixed possible missed packets on Tree branches under high bus load 
  • Fixed possible delays when one Tree branch is faulty or unused causing lost packets under high bus load 
  • Improved error statistics 

• Nano DI Tree Firmware 14.7.2.14 

• • BG-I18791 Fixed possible packet losses 

• Extension Firmware 14.7.2.14 

• • BG-I18935 Extension sends inputs delayed 

• BG-I18613 Touch Pure Flex: Config does not allow characters (# & $) even if they are supported by the device 

Shading 

• BG-I27030 Geiger SOLIDline ZIP Air: dwc input not working after Obstacle detected

Audio 

• BG-I28113 Audio Player: end of presence does not pause manually started music 
• BG-I28114 Audio Player: presence does not start music during active event 
• BG-I28146 Audio Player: outputs V+/V# trigger when no music is playing 
• BG-I28137 Music Extension: no System messages shown when extension is not used on a Player 
• Music Extension: add System message for high CPU Temperature 
• Miniserver creates invalid init message when connecting to network devices (Audioserver, Intercom) causing pairing errors (invalid Base64 encoding) 
• BG-I28305 Audio Player: Bell immediately stops on falling edge of input instead of playing the whole file 
• BG-I28353 Audio Central: TTS retriggered on SPS restart 
• BG-I28385 Audio Player: Event stays active after restart 
• BG-I27958 fix USB/SD Content mixed up in wrong order 
• BG-I27892 cleanup of tts files when exceeding 100M, changed to delete files >= 2d (was 7d) 
• BG-I27916 fix crash in TunineSourceFinder 
• BG-I28037 fixed issue with Radio Station that sends stream instead of m3u urls 
• BG-I28404 fixed missing Contextual Info in Queue view 
• BG-I28358 fixed adding custom urls Streaming Servers that do not support HEAD Requests 
• Issue where spotify locally started causes other Players in fixed group (singlemode) to start too. 
• Eemoved Stream Prebuffering causing latency issues in Radio playback 
• Spotify no playback but shows visual playback (former spotifyconnect patch) 

• ‘New Audioserver Software’ reports did not work due to timeouts 
• Stream Error Handling for unplayable streams improved 
• Race conditions that can cause a crash on event playback 
• Performance optimizations for Miniserver Compact Audio distribution on local Tree Turbo 
• Volume+ command on muted playergroup causing the volume to increase on one player 
• Player Default Volumes did not sync on startup could cause unexpected behaviour 
• Issue where System Status Messages and Callback Actions were not reliably forwarded 
• Custom Sound Event Volumes 

Climate 

• BG-I27771 Intelligent Room Controller: Multiple history entries when starting timer during manual calendar temperature 
• BG-I28129 Intelligent Room Controller: Presence does not extend Comfort mode started by input “C” 
• Intelligent Room Controller: improved text for history-entry “source blocked” 

Lighting 

• BG-I27718 Lighting Controller: Inconsistent Capitalization in English 
• Light controller: invalid output value for rgb-only smartactors

Energy 

• BG-I27409 Copy of Wallbox which is managed by Wallbox Manager 
• BG-I27053 Wallbox: limitation via Api connector not remanent 

• BG-I27525 Wallbox Manager: Change of priority price not directly forwarded to Wallboxes 
• BG-I26303 Wallbox: Lcl output doesn’t use specified unit 
• BG-I26268 Wallbox Gen.1: wrong calculation of E1/E2 
• BG-I27927 Wallbox: System message Supply drop can’t be quitted 
• BG-I26899 Wallbox behaving incorrectly when Vc output is inverted 
• Wallbox Manager: Loads not activated 
• Quick Search: Energy Flow Monitor not shown as top result 
• BG-I27705 Energy Flow Monitor: Rest node does not use defined units

Multiplicator 

• BG-I27242 Multiplicator: Miniserver dialog allows duplicate serials 
• BG-I27508 Multiplicator: Disinheriting also goes across input references this results in disinheritance of large logic blocks even if they only connection is using the same inputs 
• BG-I28153 Multiplicator: Custom Changes (Expert mode) on disinherited controls removes them from project when loading from Miniserver 

Trust 

• BG-I27820 Trust user group disappears 
• Trust Webservices not working anymore 
• Trust Link authentication not working 

Auto Configuration 

• BG-I27314 Dali outputs used even if they are already in a group 
• Managed Tablet can get created multiple times 
• BG-I27684 Removed unnecessary control hint text 

Diagnostics 

• BG-I27867 Tree Monitor does not show all information for intercommunication packets 
• Link Monitor displays wrong commands 

Project Planning 

• BG-I27402 Special characters in room and category names 
• BG-I28028 Audio products are planned with the peak power usage 

Stability 

• High SPS CPU load when there are lots of online states in the project 
• Miniserver reboot when receiving invalid text memory value from a client 
• Miniserver reboot when syncing of files to SD card takes too long 
• Config hangs when saving project 
• BG-I27532 Config crash when starting dali learning dialog 
• BG-I27538 Config crash when deleting entries from Miniserver Keychain 
• BG-I27339 Config crash when loading from Miniserver 
• BG-I27589 Config crash when opening default screen setting of managed tablets from setting dialog 

• Trust: Miniserver reboot when user is deleted due to race condition 
• BG-I27619 Config crash when importing project 
• BG-I27821 Config crash when saving to Miniserver 
• BG-I27909 Config crash when loading from Miniserver 
• BG-I27639 Config crash when doing an Undo while Monitor was opened 
• BG-I28182 Config crash when opening Wallbox Manager or EFM dialog out of setting edit dialog 
• BG-I28018 Config crash when resetting multiplicator changes 
• BG-I27821 Config crash when saving to Miniserver 

New

• M-Bus Extension
• BG-I26526 Expand childs of memory flag when selecting memory flag
• Display Intercommunication ID next to Intercommunication caption in periphery tree
• Nano Dimmer (US)
• A3D9-T1029 Energy Flow Monitor: Provide statistic for rest
• Wallbox Manager
  • Distribute available power to multiple Wallboxes
• A3D9-T997 Simplification of math blocks: now all connections are considered for calculation in add, multiply, minmax and average operations
  • previously only the last changed value was used when an input had multiple connections
• DALI data preparation changed for DALI Air support
• DALI Air
• Push Notifications: Support for new handling on iOS and Android devices
• Separate permission to allow a user to trigger a Miniserver backup
• Wallbox
  • Priority input (when used in combination with a Wallbox Manager) no behaves like the Enable charging input
    • Attention: This may change behaviour if you have already used the Prio input!
    • Priority charging is started with a short pulse (<1s)
    • When the pulse is longer then 1s charging is stopped again with the falling edge
  • Current mode output ‘M’ is now also available when managed by a Wallbox Manager
    • 0 = Charging not allowed
    • 1 = Eco charging allowed
    • 2 = Priority charging allowed
• Access NFC Code Touch
  • Output Uidla now uses username as fallback when no User ID is set
• XF1-T8 Add Support for XAL Lamp
• Managed Tablets
  • Pair your wall mounted tablet with your Miniserver
  • No need to remember login credentials
  • Function Block support
    • Activate screen
    • Do not disturb
    • Screen brightness
    • Battery Level
  • Configure Ambient Mode in Loxone Config
• A3D9-T1087 Added Miniserver-Healthcheck
  • Checks basic functionality like Network, Timeserver, CPU/Memory/SD-Usage

Fixed

General

• BG-I26469 Recovery of communication loss
• BG-I26492 Schedule-Dialog: no colour-info for access schedule
• BG-I26317 Sequence Controller Return statement is ignored when opening dialog during simulation
• BG-I26497 Text of merged object not updated in tree when dragged to page
• BG-I26295 Mouse position is offsetted when a banner is displayed
• BG-I26009 Update may fail
• BG-I26192 Statistic deletion interval of meters of a power supply & backup is reset when loading from Miniserver
• BG-I23901 HomeConnect update states after device was offline
• BG-I26285 Mouse wheel scrolling changes selected ribbon while another dialog is opened
• BG-I26325 Memory flag inputs don’t have automatically the colour of the output
• BG-I26398 Miniserver deletion from client search dialog breaks project
• BG-I26410 Usergroups not updated after a trust user is transferred
• BG-I26403 Exporting client project creates unusable memory flags for connection references
• BG-I26424 Objects not showing central info when used in Door and Window Monitor
• BG-I26418 Internal tree of Miniserver tree not usable
• BG-I25615 NFC function block shows a strange output name when deleting name of connected output in GUI
• BG-I24914 NFC Code Touch does not react on off input
• BG-I24106 Access denied now shows in the Config “Code …” or “NFC …”, also the user is shown if available
• BG-I24267 Door and Window Monitor Fixed NOT function block filtering description of connected input
• BG-I24873 Confirming burglar alarm configuration dialog sets program status to not identical
• BG-I26124 Text for deactivated codes in the overview of authentication attributes
• BG-I26202 Gate Controller: API connector not at last position
• BG-I26221 Sequence Controller: tabulators in set commands are removed
• BG-I26272 AC Control: Common devicetype shown when learned in with app
• BG-I25589 Automatic designer: mode-names different to documentation
• BG-I26386 Update Italian Calendar names
• BG-I26417 Presence Control: output Pc not resetted with “off”
• BG-I26370 Window: after Wp input Pc and Po no longer works continuous pulse
• BG-I23136 Touch and Grill T5 missing from Room 2
• BG-I26244 PLK calendar: typo fixed
• BG-I26176 Virtual output does not automatically adapt type (analog/digital) after being connected
• BG-I26142 Update of clients on a Gen.1 gateway fails due to less memory
• BG-I26270 App Learning: Tree to Air Bridge re-appears in search results after creation
• BG-I26291 Link caption displays wrong device count
• BG-I26179 Default user right automatically gets re-added
• BG-I26295 Page Banner overlay overlaps function blocks
• A3D9-T649 added switchboard and installation location columns to diagnostic views
• BG-I26119 closing a device diagnostic dialog didn’t stop the running diagnoses in all cases
• A3D9-T557 view settings are now stored and reloaded for all compatible dialogs (device diagnostics, device learning, …)
• Webengine view unable to load fonts from local resources (e.g. MessageCenter)
• ProjectManagement view had incorrect font applied
• centering of widgets/windows in parent didn’t work correctly in all cases
• BG-I22968 updated Husqvarna Plugin v1.0.7
  • more logging
  • fixed potential auth issues
• BG-I26067 Edit Settings dialog: visual identification context menu for unsupported devices
• BG-I26011 Rooms from client not visible in user management
• BG-I26117 Invalid page selection after closing search dialog
• BG-I25946 No Color-Info for digital schedule
• BG-I26140 Repair visibility of internal Air/Tree-IO’s
• BG-I21204 Automatic Scene: invalid scene after adding project as client
• BG-I24750 Intercommunication output send wrong value after SPS restart (may happen on client gateway systems)
• BG-I26055 1-Wire last received timestamp not remanent
• BG-I26024 Miniserver keeps coloured background in periphery tree after removing client object
• BG-I26159 Caller not sent when text is too long
• BG-I26204 HunterDouglas cant be added
• BG-I26192 Statistic deletion interval of meters of a power supply & backup cant be set
• BG-I25266 App Learning: No proper error in app when device is unable to be paired on a client
• BG-I26219 Page tabs not updated after load from Miniserver
• BG-I26189 Config connection via remote connect fails due to timeout
• WA1-T426 Wallbox Air/Tree: Add systemmessage for supply voltage drop
• BG-I26656 Access Keypad: auto connect UidLa to Uid of Wallbox
• BG-I26381 opening air diagnostic dialog now only shows single route if air device is selected in document tree
• Some device learning dialogs didn’t set modified flag when unlearning a device
• BG-I18876 limiting data in GenericView to not grow infinitely and keep filtering performance up
• BG-I26021 raising device diagnostic windows when showing warning that a device diagnostic is already running
• BG-I25712 Intercommunication device wasn’t resolved correctly in UDP monitor for incoming packages
• BG-I26523 tree branch in Tree learning dialog was named “right” for single internal branches
• BG-I25530 improved key navigation directly from search input to table view in MyProjects view
• BG-I26449 it is possible to delete Dali “Gruppe”
• BG-I26572 Description of objects not used for reference drawing
• BG-I25853 Touch Pure Flex: Degree sign takes up two characters
• BG-I26530 App Learning: Devices don’t identify audible
• BG-I26674 Login to Miniserver fails when previously connected to a Miniserver with same address
• Wallbox and AC Control configuration dialog have untranslatable texts
• Wallbox User not reset when charging is ended
• BG-I26618 Air Base Channel Free Input does not have correct name
• BG-I26591 LiveView can’t be stopped when ribbon is minimised
• BG-I26703 PicoC Editor shows wrong string highlighting
• BG-I26689 Connector window pops up when changing page while connection referencing
• BG-I26509 Passwords to Miniservers now not contained anymore in files saved to Multiplicator Miniservers
• BG-I25852 Touch Pure Flex: Allow asterisk in display text
• BG-I26615 Status: comparing text with analogue values was not working properly
• Object intercommunication fails after a power outage (Miniserver starts faster than the network)
• BG-I26942 Frequency counter on digital input of Miniserver causes incorrect edges which causes incorrect values on metering function blocks
• BG-I26522 Alarm History does not use description of alarm trigger instead name is always usedBG-I27011 Drag and drop of device causes visual glitches while doing auto connection
• BG-I25582 Burglar Alarm: Confirming alarm resets window states set from parameter ‘Aoc’ which triggers alarm again
• BG-I23915 Visualization shows data of last hour in the app in the first minutes after the full hour
• Grill Thermometer shows offline error message even if online state is not monitored
• Text Generator: Missing documentation textsBG-I26612 Climate controller dialog: change in prohibition settings changes settings on room controllers
• BG-I26298 User management: user cannot be added to a group if the same group-uuid was imported from trust member
• BG-I26952 Text generator: improved search for userid for trusted users
• Belimo configure dialog: cursor jumps while verifying input
• BG-I26317 Closing sequence dialog during running simulation stops sequence execution
• BG-I23563 Alarm Central: disarm command unlocks Burglar Alarm Control
• Freshly inserted Schedule objects now only contain Monday till Sunday operating modes per default
• BG-I26670 Value correction could show -0 in some instances
• BG-I26918 Wallbox missing when creating partlistBG-I26795 Invalid configured virtual output commands not working anymore
• BG-I26718 Toilet Ventilation Controller: Doesn’t turn off again after a save to Miniserver
• BG-I26784 Linked controls not shown in app
• BG-I26868 Project Backups window renamed close buttonBG-I26762 EFM: Missing states after auto update (visualization not working)
• BG-I26763 HTTP client didn’t return error to caller properly in all cases
• BG-I26807 fixed possible value overflow when resetting values in Tree/Link diagnostics view
• BG-I27191 Smoke & Water alarm: Texts do not use description of alarm trigger instead name is always used
• BG-I27192 SD Test fills Miniserver SD card
• BG-I27192 No error message when trying to update Miniserver but SD card is full
• BG-I27109 SD Format: Better button texts for message box
• BG-I27202 Warning message when saving new project to Miniserver is confusing
• BG-I27114 Adding client project may create an invalid project
• BG-I27223 Air learning: Removed deprecated IP column & time column is empty
• BG-I26661 Memory flag shows invalid value in visualization
• BG-I26946 Import Users: importing users with duplicate user-id possible
• BG-I26973 Periphery Tree: duplicate Touch & Grill references
• Text generator does not handle UserID fallback to username which is used by the NFC access
• Allow more information for virtual http input
• NFC Key and ID not in documentation
• BG-I27175 Network search does not show actual type of found Miniservers
• DALI AIR DALI search dialog bugfix
• fixed DALI extension configuration data

Devices & Extensions

• Air updates:
  • Fixed CRC error packets appearing 24 times in a row (Air monitor)
  • Broadcast update verification is now done separately to improve reliability and reduce traffic
  • Monitor packets for Air updates are now more descriptive
• BG-I25481 AcControl: some Daikin S21 Aircons not communicating
• BG-I26154 Touch Night Light Watchdog resets
• BG-I25759 Touch Night Light Display briefly turned on after POR
• BG-I21717: Nano IO and Nano Dimmer: improved touch handling
• BG-I26173: Nano IO going offline
• BG-I17870: Nano update fixed
• New NFC Code Touch Binaries:
  • Better error checking during nfc learn mode (trust data not written correctly was not detected)
  • Better error logging
• New Touch Pure Flex Binaries:
  • BG-I18724 Touch Flex time out of sync
• BG-I26476 Valve Tree: actuators losing calibration data
• New binaries (14.05.11.08) for Belimo Tree/Air (Fix: Startup error messages, Online state handling)
• Dali Air: Conversion for devices created in older versions
• BG-I26448 Ac Control Air: Mitsubishi Heavy Industries loses address of aircon
• NFC Code Touch Tree: overhaul of NFC handling, quicker response and better diagnostics

Shading

• BG-I26280 Dts handled incorrectly
• BG-I17902 Automatic Jalousie does not fully close after manual slat position

Audio

• BG-I26744 Audio Central: DisP not forwarded to Music Players
• BG-I26540 Audio Central: Lock not forwarded to Music Players if DisPc is set at the same time
• Miniserver Compact
  • TuneIn Ads Jingle removed
  • Prebuffering for Radio removed

Climate

• BG-I22318 Climate Controller selection dialog: inherit-flags not set when using check all / uncheck all
• BG-I26194 Intelligent Temperature Controller: fixed inconsistencies when using fahrenheit
• BG-I26251 Intelligent Roomcontroller: invalid mode selected when current temperature is above heat protection
• BG-I25940 Ac-Control: first target temperature not assigned
• BG-I26096 Ac-Control: Invalid values on inputs(Mode,Fan,Adir) select next possible value
• BG-I26013 Climate controller dialog: disable unassignable room controllers
• BG-I26415 AC Control Air: invalid type-name after loading from miniserver
• BG-I26383 IRC: Presence Button has no function when Dwc is active
• BG-I26373 Disable heating/cooling ban not considered in calculating mode
• BG-I26363 AC Control Air adds Vane 5 to Mitsubishi Electric
• BG-I26553 IRC: invalid temperature info when window contact changes to off
• BG-I26853 IRC: Prepare phase not started when fixed setpoint calendar entry
• BG-I26842 Climate Control doesn’t save changes made by the “unselect everything” option
• BG-I27134 Intelligent Room controller: learning of heat up times disabled by presence input
• Intelligent Roomcontroller: Systemmessage “Big Difference” comes too early when comfort mode is started with presence

Lighting

• BG-I26364 Hotel Light Controller: Remanence not working
• BG-I25837 Lico does not detect Memory flag set to Smart
• BG-I27070 Light controller: sequences not properly unmixed for moods with multiple sequences

Energy

• BG-I26145 Spot Price Optimizer no status update sent to app after reset
• BG-I26316 Wallbox Gen1: Output Cpl set to 0
• BG-I26229 Modbus on Wallbox doesn’t pick up Modbus settings from template
• BG-I26271 Spot Price Optimizer: Old limits are used when trigger is exactly at hour change
• BG-I26271 Spot Price optimizer: Wrong categorization of values after a reboot
• BG-I26395 Spot Price Optimizer: Show data source and unit next to spot market options
• BG-I27065 Energy Manager causes Miniserver reboot when priority input is out of bounds
• BG-I27066 Energy Manager: Assumes power is available when a load was activated by something else (That power is now not used anymore for calculation of the available managing power)
• Wallbox: Connection fee provided by Manager not correctly set
• BG-I26977 Wallbox displays wrong state in app
• BG-I27053 Wallbox: charge limit not assigned via API-Connector
• BG-I26044 Spot Price Optimizer: Spot source has problems with values at midnight in specific time zones

Multiplicator

• BG-I26504 System schematic image not transferred to Miniserver
• Connection flags missing when loading from Miniserver
• BG-I26318 Audioserver added via program change not working
• BG-I26792 Editing of global project settings may cause a config crash
• BG-I27018 Language not changed when saving via Multiplicator project to the Miniserver

Trust

• BG-I26273 Trust Member Miniserver version not set
• BG-I26235 Trust Link does not use description for name of members
• BG-I26269 Changes of transferred users not sent to trust
• BG-I26269 Trust data not synchronised due to race conditions or high data load
• Trust IO: Miniserver sends same command to a Miniserver multiple times
• BG-I26372 Trust: Already created IOs shown again in the search
• Trust: No proper internal name for created IOs
• Miniserver now caches resolved clouddns address
• This results in faster send of messages when a trust member is using clouddns
• Trust Link Authentication more robust
• User change from another Trust Member
• Reverify the certificate from a Trust Member before using public key to improve security
• BG-I26568 Trust search: Members not sorted
• BG-I26917 Trust communication race condition causes Miniserver reboot
  

Belimo

• BG-I26308 Belimo Air: IO’s not sorted alphabetically

Diagnostics

• BG-I26103 Health Check description is used instead of name for some inserted items in tree view
• BG-I26089 stopping air diagnosis were blocking Config for few seconds in some cases
• BG-I26304 Air Diagnostics view was cleared when diagnosis has finished
• BG-I26116 Diagnostic views had empty column filters for columns only showing an icon or checkbox
• BG-I26016 Diagnostic views were missing Device type column content for device under diagnosis

Control History

• Do not use device-source for certain device-types (Nano Di Tree, Air)
• Show origin-control/device when using api commands
• Invalid recalculation-entry on end of shading period
• BG-I25976 Do not create locked-entry for short pulses
• BG-I26321 Shading block floods with entries
• BG-I26810 Auto Jalousie: History-Entry for preparing times written after saving remanence
• Invalid source name directly after reboot
  

Project Planning

• BG-I26327 LineIn-Id of created Audioserver not immediately set
• BG-I26787 Wrong power was used for LED Spot WW PWM in calculation

Stability

• BG-I26314 Config crash when editing light controller master colour
• BG-I26290 Config crash when opening user management dialog
• Several memory leaks
• Miniserver reboots due to race conditions when updating user objects from trust
• BG-I26525 Config crash when opening file
• BG-I26233 Config crash when closing tree learning dialog
• BG-I26214 Config crash in light controller dialog
• BG-I26218 Config crash when selecting range in tree
• BG-I24802 added possible fix for some crashes caused by System’s graphics driver in some rare cases
• BG-I26622 Config crash when restoring template preset of intelligent room controller
• BG-I26277 Crash when opening sequence control dialog
• Several config crashes
• Miniserver reboot when saving to Miniserver after Trust was deleted
• Miniserver reboot when replacing device via app learning

New

• Trust
  • Trust Members can now be sorted and grouped together for a better overview in the periphery tree
  • Assign Usermanagement right automatically to members
  • Trust Link: Switch to other Trust Members where you user has permissions for the visualisation easily within the app without any need to reauthenticate
• Health Check (Menu > Diagnostics > Health Check)
  • The Health Check integrates the diagnostic tools of Link, Tree and Air into a unified user interface.
  • It allows for a comprehensive review during and at the end of a project,
  • ensuring that the wiring and other critical aspects meet the standard.
• A3D9-T1066 Added Control History for Auto Jalousie, Light Controller and Intelligent Roomcontroller
• A3D9-T1062 Climate Controller add output for average outdoor temperature
• Export Users to CSV
• A3D9-T1055 Modbus High Performance Input
  • reduce common minimum polling-cycle to 1s (except Air-Devices)
  • up to 2 Sensors per Modbus-Server or Extension allow a minimum time of 0.1s
  • if multiple modbus-servers with same IP (TCP) or multiple devices with same Device-ID(TCP + RTU) exists, performance sensors are disabled for these devices
• Intercommunication: Added support for Smart Actuator values
• Memory Flag: Added support for Smart Actuator values
• Spot Price optimizer: Added CZ market (uses OTE as source)
• A3D9-T1034 added setting for automatic deletion of statistics
  • Enabled per default for new controls
• Added new Config HTTP client (e.g. used for connection to Miniserver)BG-I23356 Control Linking dialogs: Show device name to better distinguish IOs
• A3D9-T991 New outputs for Meters: add new outputs for meters for last day/month/year
• A3D9-T947 NFC Tag Diagnostic Tool add new tool for reading and formatting nfc tag
• A3D9-T888 New Mode for ClimateController (OFF = -1) (Needs new app version)
• BACnet:
  • Invalid properties (time, date, utc offset)
  • Adapted Model name
  • Adapted vendor name
  • Added support for device reinitialization command
  • Added support for foreign device properties
  • Removed unsupported IPv6 mode
• Ping: Added support for statistics
• A3D9-T1059 Add new interval for statistics 15 min
• A3D9-T948 Templates can be downloaded and inserted via Quicksearch now
• A3D9-T1073: Add last day/month/year outputs for wallbox

Fixed

General

• Config transfers update file for wrong type to Miniserver
• BG-I25574 User object has phone attribute twice in xml
• BG-I25576 Kosovo can’t be selected as country
• BG-I23749 System Status: Webservices in client/gateway systems return an error
• BG-I25544 SPS not restarting after saving to the Miniserver
• Pages of gateway project are not sorted alphabetically anymore
• BG-I25488 Presence Sensor MaxTime between Motion not working anymore
• BG-I25311 Touch&Grill: wrong naming for Inputs of Room 2
• BG-I25371 Automatic renaming of device + referenced control does not work when appending numbers
• Device Status Dialog: title not translatable
• BG-I25499 Periphery Tree: Cabinet not displayed for network devices (e.g. Audioserver)
• BG-I25514 Edit all Extensions only lists extensions of gateway
• BG-I25421 Selection Switch (+/-): Entered Parameters not validated
• BG-I25428 Page window: Uses different sorting than page tabs and program tree
• BG-I25391 Touch Flex: Controls from other Miniservers are displayed in selection dialog
• BG-I25084 Drag and Drop of multiple API actors not working
• BG-I25478 Miniserver Replace/Convert: Onboard Digital Inputs/Outputs and Analog Inputs are not replaced by an equivalent Extension
• BG-I25519 EFM dialog: Selection after removing a meter
• BG-I24995 Combobox shows wrong items when opening drop down
• BG-I25405 Miniserver allows invalid subnet mask
• BG-I15045 NFC Code Touch: deactivated user name not showing in history
• BG-I17819 NFC Code Touch Air: “access denied” message after firmware update
• BG-I22661 Fixed drawing error in Lightcontroller-dialog
• BG-I24685 Control Drawing: show part of additional connector-text if there is room
• BG-I24377 Options Dialog: editing first selected item does not work
• BG-I25455 Central (Old) moving blinds not stopped with Cu/Cd
• BG-I25380 Miniserver Gen.1 can’t download web interface when its too big
• Monitor: Empty device combobox shown
• Settings icon for first item in periphery tree was hidden behind collapse icon
• BG-I25275 search dialogs of plugins display the provided name for each search result
• BG-I25425 Creating room via API creates a different room on a client
• BG-I25424 Special characters not correctly converted by http client
• BG-I25324 Belimo sensors not listed in reference selection dropdown
• Plugin IO: Invalid unit after creation
• BG-I25263 Control Preset: Select current preset when opening manage dialog
• BG-I25395 Nano Motor Controller: There is no systemmessage when an overcurrent is detected
• BG-I25405 Config allows invalid subnet mask
• BG-I25480 Quick Search shows wrong top result in languages with diacritics
• BG-I25284 Project Planning: Creation of config file fails when there are power supplies in rooms
• BG-I25398 User Import/Export: Added custom fields
• BG-I25435 SD Format dialog: Version combobox not shown in some cases
• BG-I25411 Miniserver reboot when learning Hörmann Air via App
• BG-I24938 added Ctrl-O shortcut to project management view
• BG-I24828 corrected click behaviour of menu items in project management view
• BG-I24587 initial filtering in monitors only worked correctly on empty views
• BG-I24866 HTTP VOut Off-Cmd did not send POST request when body data was set empty
• BG-I25086 Sauna target temperature not saved when changed via API Command
• Load from Miniserver with custom external address does not use HTTP connection
• BG-I24840 Deactivated automatic rule is executed
• BG-I24591 Intercom Search: results without valid serial number shown
• BG-I24496 Nano 2 Relay: Api-Connector not working on Roof Window Shading
• BG-I24781 Roof Window Shading: Automatic not restarted with daychange
• Roof Window Shading: change of Sunshine-State not immediately recognized
• AcControl Txe-irq is disabled after last byte in Tx-buffer
• BG-I25168 Learning dialog: Automatic device selection not always working
• BG-I25273 Function blocks show a unit in their description
• BG-I25304 SD Format: Allow version select for Miniserver Compacts
• SD Format Dialog: Version combobox not updated when downloaded firmware packages are modified
• BG-I25136 Program Tree: Multi Selection does not properly select items
• BG-I25270 Invalid selection after paste
• BG-I25342 Touch Pure Flex control selections get lost after adding project to a gateway
• BG-I24953 Periphery tree filter gets removed after inserting something
• BG-I25150 Resetting password does not work properly, if there’s a user ‘admin’ without permissions
• BG-I25254 Touch Pure Flex configuration is not automatically loaded when learned via app
• BG-I25277 No error message when Loxone Config fails to load the icon library
• BG-I25281 Tree to Air Bridge Room not displayed and gets lost after saving project to Miniserver
• BG-I25218 No info on how to proceed after changing gateway
• BG-I24622 Drag and Drop of multiple system variables not always working
• BG-I24695 LoxoneFormat not starting when there is already a instance open
• BG-I25356 Statistic dialog: Difficult to fetch very old statistics added ‘until’ date selection
• Air Base encryption key changes after first save to Miniserver
• BG-I25292 Pool Controller: Delay is not considered when pump was started due to a temperature control cycle
• BG-I24280 Sequence Controller does not get started with start pulse
• BG-I24511 Room filter does not expand stereo childs
• BG-I25854 New user does not receive all states via websocket
• BG-I25203 HTTP Request with Basic authentication with User only
• BG-T3187 Nano Motor Controller: Increased maximum for current settings to 5000 mA
• BG-I25857 No proper return code when client does not respond to app command
• BG-I25764 Alarm Clock: Tna output does not update after midnight
• BG-I25814 AC Control: API Get Value commands not working
• BG-I25791 Device Update available message gets triggered constantly
• BG-I25856 Wrong object type and icon for user caption
• BG-I25808 Problems when correction is set to all same values
• BG-I25823 Miniserver always sends a ‘Content-Type’ HTTP header for http requests (e.g. Http input) even if there is no body
• BG-I25781 Hide references that should be hidden (conversion of invalid documents)
• BG-I25896 Virtual HTTP input has invalid polling time
• BG-I25889 Automatic scrolling in view does not stop
• 1-Wire DS2438 does not get a proper name when created from search
• BG-I25758 Home Connect: Devices of type ‘oven’ don’t have an actor to start the current selected program
• NFC Tag which is also learned on a disabled user is not directly skipped
• UDP Monitor: Sent intercommunication packet shown as received
• NFC Credentials generated when first needed, instead of at document creation. Fixes duplicate credentials when using default document as basis
• BG-I25750 Sequence Controller: Active sleep not aborted when changing mode
• BG-I25749 Audioserver: send Miniserver-Timezone on init
• BG-I25722 No error message when setting same encryption key on a second Air Base
• BG-I25743 Modbus Monitor shows invalid text when an error is received
• BG-I25697 Generic Table: Paste of text value with comma on numeric edit not working
• BG-I24702 1-Wire Extension: Detailed device information is missing 1-Wire statistics
• BG-I25620 Caption Bar displays that no project is opened even if one is open
• BG-I25681 Tree and Air devices: Panel not displayed in periphery tree
• BG-I25696 HTTP Input: Onlinestate input missing when inserting template
• Permitted Users dialog: Added Multiedit line
• BG-I25489 Generic Table: Non editable cell is emptied
• BG-I23749 System Status: Webservices in client/gateway systems return an error
• BG-I25652 Automatic file name stops at 99 (“Untitled 99.Loxone”)
• BG-I25691 Runtime Counter: Maintenance Interval defined by logic not properly handled
• BG-I25627 User is immediately deleted when expiration action is set to delete and user is not yet in the enabled timespan
• BG-I25602 Text Generator: Trust-Userid not recognized
• BG-I25427 Air/Treedevices/Music Zones have no api-actor after conversion
• BG-I25572 Operating Mode: sensor creates an edge after restart
• BG-I25559 Text generator: autoconnect of userid to supported controls
• BG-I24804 Device Status: no battery value for Internorm Devices
• Device update abort after only one try. “Update failed” message will show up after five tries have been unsuccessful
• QU1-I356 Devicestatus: increased timeout for audioserver/intercom diagnosis
• BG-I25847 Intelligent Roomcontroller: adapt Heat/Frost Protection temperatures when comfort-temperature is above/below
• BG-I25617 Textgenerator: output is not empty when using unconfigured properties
• BG-I25703 Belimo Air/Tree: invalid object type in context menu
• BG-I25752 AC Control: disconnect API-connector keeps entries disabled
• Loading of Custom changes from Miniserver fails (resulting in invalid or lost data)
  • Loading is now done via HTTP which is more reliable
• No error message when loading of custom changes from Miniserver fails
• BG-I25931 Periphery tree sorting not correct after insert of Miniserver Compact
• BG-I25834 Miniserver Gen.1: Detection if SD card is broken not reliable
• BG-I25711 Monitor: Device filter not working for all technologies
• Monitor stops when changing device filter
• BG-I24245 Extension learning: Modbus Extension cant be replaced
• Manually editing serial number in extension learning dialog may show ‘Duplicate serial’ error
• BG-I25930 Periphery Tree: Objects disappear after renaming one directly on the page
• BG-I25857 Return client name when web service fails
• Miniserver: Improved startup speed during loading of permission infos
• HomeKit Plugin does not display proper name in property window description
• Insert of objects is slow
• BG-I25805 Daytimer-Dialog: Color-Info text cut off
• AcControl Mel Fanspeeds, DaiS21 Mode Auto, refixed Uart IRQ, communication watchdog time
• BG-I26017 Miniserver fails to load new configuration after update (Config transferred invalid file)
• Control History
  • IRC: duplicate entries if climate controller blocks additional output
  • added entry when additional outputs are enabled
  • LiCo: Added entry when mood is edited
• Adapted RSSI limits for air devices
• BG-I25694 Ac Control: Airflow, Fanspeed not restored after reboot
• AC Control: Added Fan Speed “Silent” for standalone controls
• BG-I26023 Control History: invalid timestamp after web service + additional fixes
• Trust Link: Peers are shown which have not yet joined
• Tree diagnosis slow when there are dummy devices
• BG-I25983 Misleading error message when connection gets lost during saving to Miniserver
• BG-I25997 Program: Increased length limit for PicoC text output to 4096 bytes (from 1023)
• BACnet:
  • Remove High/Low Limit property for analog outputs since its not conform with the standard
  • Fixed change of network port properties
• BG-I25888 Window: Movement by Weather-Protection is not finished
• Ac-Control: Add mode “Silent” for Mitsubishi Electric

Devices & Extensions

• New binary (14.03.08.02) for Modbus Air (Fix Watchdog, Offline blinking)
• New binary (14.03.08.02) for Hörmann Air (Fix Watchdog)
• New binaries (14.03.08.03) for Wallbox Tree/Air (activated HW-Watchdog; removed Modbus debugging feature)
• BG-I24056 Nano IO: Change of usage causing no reaction of relays
• improved performance of access codes in big trust installations
• new binaries for NFC Code Touch Tree (Gen. 1 and Gen. 2) and NFC Code Touch Air (Gen. 2):
  • improved performance in big trust installations
  • improved NFC performance
  • improved firmware update process
• new valve tree binary: fixed valves increasing force slightly after saving into miniserver
• new Touch Pure Flex binary: improved wakeup handling for temperature/humidity measurement
• BG-I20160 NFC Code Touch: NFC Credentials not random

Energy

• BG-I25279 Wallbox: new value on limit input changes manual limit
• Epex Spot: Miniserver thinks data is outdated after day change
• BG-I25678 Wallbox: manual limit not set when started via app
• BG-I25593 Energy Manager: User cant decide manually if the load is analog or digital (added a selection box)
• BG-I25714 Wallbox: charging session-user lost after reboot when connection to input Uid is not remanent
• Wallbox 7.4kW: invalid default values after drag&drop

Shading

• BG-I25950 Automatic Shading: Parameter Dts/Dte handled incorrectly for 2nd shading period of north-oriented windows

Belimo

• BG-I24769 Belimo Addressing: device not assignable
• BG-I25383 Belimo configuration dialog: cursor position not restored

Audio

• BG-I25283 Audio Server: Stereo Outputs cannot be separated if Audioserver was a Compact before
• BG-I24327 Music Zone: UPNP Settings not shown

Lighting

• BG-I24728 Light Controller: incorrect moods when connecting unconfigured lighting group
• BG-I25837 Light Controller: Memory flags with Smart Actuator Type not properly detected
• BG-I25957 Central Light: Unselected Lightcontroller Gen. 1 turned off

Climate

• BG-I24852 Climate Controller Dialog: Roomcontrollers updated without changes
• BG-I24943 Climate Controller not turning on with IRC demand
• BG-I24507 Room Ventilation: percentages shown with three decimal places
• BG-I25401 Invalid default values for Intelligent Temperature Controller / Heat Curve in Fahrenheit
• BG-I24896 Mixing Valve Controller: outputs not updated after OFF
• BG-I24946 Intelligent Room Controller switches rapidly between heating and cooling if temperature is exactly heat protection
• BG-I24633 Intelligent Roomcontroller: wrong target temperature
• BG-I25566 Intelligent Roomcontroller: too many debug-outputs while reset is active
• BG-I25560 Intelligent Roomcontroller: do not cancel timers when
• BG-I25694 AC-Control: negative edge on Input ‘Off’ does not restore last settings
• BG-I25611 Ac-Control: Temperature-outputs not restored after reset

Client-Gateway

• BG-I25193 Gateway/Client: Manual change in Live View does not update IO on page
• Gateway fails to send command to client since its too long (e.g. update of user group)
• Gateway/Client: Update of user from trust spams client connection

Trust

• Trust User Group: Does not contain a user which has been transferred to the local Miniserver
• BG-I25501 Trust Members are displayed offline when online state input is used in project on a gateway/client system
• Trust User/Usergroup suddenly a local object
• All user groups updated when a user is removed from any group
• Miniserver sends hello to each trust member on each reboot
• BG-I25789 Trust IO not properly handled when it comes from a Multiplicator Miniserver (duplicated unique IDs were not distinguished)
• BG-I25663 Trust: changed UserID is not synchronised
• Allow to view user authentication settings when its a trusted user

Multiplicator

• BG-I25338 Multiplicator: Temporarily added users will never get removed
• Conversion to Multiplicator project resets serials of internal devices
• BG-I25169 Trust update in Multiplicator project fails when connected externally
• BG-I25861 Connection references not shown when opening base file out of inheriting project
• BG-I25844 Multiplicator requests timeout and fail when internal address is not reachable
• BG-I25591 Multiplicator: Closing project also closes all child projects

Project Planning

• BG-I23871 Changed Bedroom types in UK default file
• BG-I25583 Audioserver not created anymore
• BG-I24544 Project Planning: US default file contains additional speakers
• Project Planning: Exported file for Schrack also exports unsupported products

Auto Configuration

• BG-I24957 Auto Configuration Dialog: Check/Uncheck via column header always changes all rows including filtered ones

Stability

• BG-I25354 Config crash when moving object on page
• BG-I24753 Miniserver reboot when using Intercom Gen.1 and Gen.2 in the same project in a certain order
• BG-I25277 Config crash when loading icon library
• BG-I25313 Config crash while device search is active and Miniserver connection gets lost
• Miniserver reboot when object is deleted by program change
• BG-I25458 Config crash while using quick search
• Miniserver reboot when using Belimo devices
• BG-I25492 Config crash after deleting wallbox
• BG-I25490 Miniserver reboot when loading custom changes
• Miniserver reboot caused by access function block
• Config crash during startup
• BG-I25811 Config crash when selecting an onlinestate input of an IR module
• BG-I25658 Miniserver reboot when Trust user group or user gets deleted which was directly permitted to rooms on a client gateway
• Race Condition in gateway after saving to Miniserver causes a deadlock
• Miniserver reboot when receiving invalid answer from client
• BG-I25658 Miniserver reboot when loading custom changes
• BG-I25754 Miniserver reboot after learning Aquastar Air
• BG-I25472 Config crash when LiveView button is used in quick access toolbar
• Miniserver reboot when applying out of range values via parameters
• BG-I25969 Config crash when loading from Miniserver
• BG-I25927 Miniserver reboot loop due to missing nfc credentials

Fixed

General

• Plugin webservices not working anymore (causes HomeKit problems in the app)

New

• Modbus Air
• A3D9T1048 User: Add Additional Options
  • UserId, Company, Personal Number,…
  • Custom fields configurable in user-caption
•  Access NFC: added Output Uidla: UserId of last authorised user
•  A3D9T1051 Text Generator Expansion: 
  • Add access to User properties and System Variables
  • Additional inputs and outputs
  • Add parameter for delayed calculation of Text-output
• NFC Code Touch: Fallback for not decryptable tags: If a encrypted tag can not be read, NFC Code Touch will fallback to unencrypted UID
• Multiplicator: Update trust objects in Multiplicator file
• Trust User Transfer: Allow selection of users which should be transferred
• A3D9-T389 added possibility to open properties popup from periphery tree

Fixed

General

• BG-I24723 Ac Control: incorrect mode after reboot
• BG-I24482 added shortcut for search (Ctrl-F) to Project Management view
• BG-I24524 enhanced value input auto correction of Pulse-at-time block
• BG-I24258 fixed possible when closing HTTP VIN learning dialog while fetching of data is still in progress
• BG-I22578 Sauna Controller with Evaporator block SSd output was wrongly set when Ssdt triggered
• BG-I24785 improved Ssdt handling when set to a value of 0 in sauna blocks
• BG-I24230 System Status Config: all active message gets lost after a change of message-state
• BG-I24527 Device Status: room/install place not shown for some device types
• BG-I24558 Device Status: added shortcut for CTRL+F
• BG-I24660 Audioserver: Deleting and re-adding Audioserver/Compact creates Problems with References
• BG-I24158 Sequence Controller: variables get lost when cancelling dialog on first usage
• Emergency file does not contain proper rights
• BG-I24510 Learning dialog: Wrong automatic selection after editing item
• BG-I24563 & BG-I24562 Monitors: Reduce amount of columns which are visible per default to save some space
• BG-I24512 Periphery tree: Multiple objects get suddenly shown when selecting an object which is normally hidden by automatic filtering
• BG-I24520 Periphery tree filter dropdown cant be confirmed with enter
• BG-I24345 Backup creation web service fails on gateway when project name contains spaces
• BG-I24570 Tree to Air bridge renaming contains device count text
• BG-I24573 Links in descriptions shown in Quick Search
• BG-I24273 Analog Multiplexer has statistics option
• BG-I24039 1-Wire: Dont poll dummy device
• BG-I24561 Tree Monitor: Branch column not translated
• BG-I24088 & BG-I24140 Text in tracker for status block has changed (No name and additional text missing)
• BG-I24160 Allow visu icon for virtual text input
• BG-I24228 Ribbon missing separator
• BG-I24627 Energy Flow Monitor shown as unconfigured in quick search
• Touch Flex name not shown in configuration dialog
• BG-I25034 Icon dialog can’t delete more than 1 custom icon
• BG-I24602 Moving average cant handle time intervals greater than 24 days
• BG-I25127 Creating room while searching for stereo extensions breaks project
• BG-I24677 Periphery Tree: Panel text not shown when it occurs in the name of the extension
• BG-I24727 Auto Configuration: PWM output of RGBW dimmer can’t be used for heating
• BG-I24777 Reference not added to periphery tree when object was inserted automatically
• BG-I24288 Network learning dialog: Configure button not available in context menu when there is only one search result
• BG-I25102 LiveView status not updating when switching between projects
• BG-I25095 IRC: Connection reference remain after heating/cooling source was removed
• BG-I25144 When selecting a Nano IO it is identified and clicking when it has a top module
• BG-I14563 Recurring edge of analog outputs which are used on another Miniserver
• BG-I24571 Tokens of disabled user not immediately purged after save to Miniserver
• BG-I24993 Exponent values calculated wrong and not correctly parsed with command recognition
• BG-I25161 Config displays outdated system state of Miniserver
• BG-I24944 System Schematic: Jpeg files not contained in backup
• Schedule: Focus in edit field gets lost
• BG-I24969 Monitor dialog: Extension filter not filled
• Tree Monitor does not show branch anymore
• BG-I24901 AC Control: Value select API commands use wrong initial values
• BG-I20565 Search not immediately working after Config start
• BG-I25259 Touch Pure Flex Configuration Dialog: Selection jumps when moving via keys in table
• BG-I24889 Textgenerator: System Variable set by Weatherserver incorrect
• BG-I24888 Print space instead of empty User-Variables
• BG-I24887 System Status: Dummy Stereo Extension shown as Offline
• BG-I25051 Master-Password-Settings shown at wrong captions
• BG-I24937 Device Status: Invalid Icon for Tree-Link Caption
• BG-I24960 AC control: NewLine Character breaks block
• BG-I25052 Touch & Grill: Invalid Connector-Short Names
• BG-I25023 Operating Modes: Drag & Drop from multiple selections not working
• BG-I24824 Schedule Dialog: time settings is not the same after drag
• BG-I24916 Central Controls ‘DispPc’ does not work for API Flex Toggle Command
• BG-I24841 Fixed crash when reopening automatic designer dialog
• User Management-API: adapt key for UserID, added debitor
• User displayed orange even if it doesn’t need a password
• BG-I24668 Periphery tree jumps when inserting tree device on intercom
• BG-I24316 Dali connector letter does not update when changing group memberships
• BG-I24190 Devices shown as offline in setting dialog when not connected to Miniserver
• BG-I24184 NanoIO: API Actor visible after insert
• BG-I24654 No settings displayed after deleting object
• BG-I24143 Editing Network settings of a Client, which is set to DHCP, shows network settings as static
• BG-I24718 Periphery tree: Text cut off
• BG-I24226 Combining/Separating all selected stereo/mono outputs not possible
• BG-I23975 Voltage input does not show volts as unit on the cover page
• BG-I24721 Air/Tree Text output not reset when output reference gets deleted
• BG-I24332 UDP Template does not contain unit or hint text
• BG-I24248 Touch Nightlight Buzzer still active when disabled in the app
• Reduced memory usage when sending files (e.g. Update) to Miniserver
• BG-I24776 Selected program page not correctly shown after deleting object
• BG-I24780 Page tabs not visible after closing learning dialog
• BG-I24744 Virtual output: Show digital settings only when set as digital output
• BG-I24860 LAN statistics empty in device Info of Miniserver Gen.2
• BG-I24816 ‘Manage users’ button available for trust user groups
• BG-I24864 Some timeobjects show misleading values in LiveView
• Dummy 1-Wire device causes problems
• BG-I24789 Config: Changed compiler settings to get access to more system memory
• BG-I24593 Formula Parser: Removed automatic bracket stripping since it may cause invalid/different formulas
• Monitor Extension Combobox: Better description for device identification
• 1-Wire Monitor: Sensor on Multi Extension not shown with name
• Prevent Document background auto save when config is already using too much memory
• BG-I24715 Miniserver Compact: Audio identify not stopped
• BG-I24932 Serial Auto not working on a Gateway
• Cloud service system message displays the last message url encoded
• BG-I24978 Miniserver configuration out of Miniserver search: Allow edit of serial when no Miniserver is selected
• Air Base encryption key changes after first save to Miniserver

Devices & Extensions

• Room Climate sensor Air: new binary with fix for BG-I23807: Offline after 31 days
• NFC Code Touch Air: fix for slow reaction to NFC after wake up in battery mode (BG-I21729, BG-I23219)
• IR Meter Reader Air: Readout of Logarex meters fails occasionally
• New binary (14.03.07.18) for Wallbox Air/Tree:
  • BG-I24803 WallboxTree Charging error when pausing or changing limits do not react with error status if the vehicle does not respond to the pausing command.
  • added logging feature of the vehicle status
• AIR connectivity problems on RGBW Dimmer AIR
• Presence extension by noise on Presence Sensor Tree
• Hörmann Air: Activated Watchdog
• Wallbox Tree/Air: Activated HW-Watchdog; removed Modbus debugging feature

Energy

• BG-I23962 Energy Manager: Load does not get deactivated when lower prioritised load was activated manually
• BG-I24992 Energy Manager: Load does not get deactivated when lower prioritised load was activated due to minimum runtime or minimum daily runtime
• BG-I25076 Power Supply & Backup shows no statistics in App

Shading

• BG-I24915 Automatic Shading Central Central toggle not synchronised

Belimo

• BG-I24899 Belimo Air: MS Gen 1 crash when alive packet received
• BG-I24853 DataPool device with outputs only goes offline

Audio

• BG-I24670 TTS Audio-Central / Player Group: add support for custom language
• BG-I24501 Audio-Extension: page-reference not shown after drag/drop
• BG-I24502 Audio-Extension-Search:Cannot replace Dummy device if 10 Dummy devices present
• BG-I24513 Stereo Extension identify from within learning dialog not working on client Miniserver Compacts
• BG-I24885 Audioplayer: support drag of multiple audio-channels on same target
• Hidden Audioserver remains when deleting Client Compact

Client-Gateway

• BG-I24367 No information in periphery tree when client is offline
• Client which has never communicated with the gateway since the reboot not reported as offline
• BG-I24369 No error message when starting device search on a extension which is connected to a offline Miniserver
• BG-I23026 Outputs from another Miniserver shown with incorrect values in LiveView

Trust

• Only send NFC data to NFC devices of trust members where users are used
• BG-I24877 Trust User or user group caption missing on member
• BG-I24933 Replace of a Miniserver (change of serial) not forwarded
• Trust Search: No proper error message when trust is not found on remote Miniserver
• Slowed down NFC Credencial sending to lessen load on Tree/Air communication

Multiplicator

• Page transfer setting not available
• Usage shows 0% after load from Miniserver
• Edit of some settings within Multiplicator edit dialog may not properly update everything (e.g. name of a page)
• BG-I23808 Filters for Miniserver status not updating in dialog
• Control preset restore not working
• No message when saving to Miniserver and one is offline
• BG-I25159 Trust join not possible when Manager is only reachable externally
• BG-I25104 Converting project which contains a trust to Multiplicator project does not convert trust members
• BG-I25082 After conversion to Multiplicator already learned devices remain with their serial instead being set only for that specific original Miniserver
• Update retry added
• Ribbon items not updating when switching between two multiplicator projects

App Learning

• BG-I21718 Tree To Air Bridge can not be created
• BG-I24240 No initial search results response
• Tree to Air Bridge can’t be replaced
• BG-I24235 API allows creation of room with existing name
• Invalid number of used devices returned
• Not all web services working on clients (send a get parameter ‘client’ with the client serial to direct the command to a client)
• BG-I24568 No request to get switchboards for wallbox
• BG-I24205 Added web services to obtain switchboards & light groups of all Miniserver with 1 webservice
• BG-I24497 Identify not stopped when switching between devices on different Miniservers

Project Planning

• BG-I24545 Project Planning US: Speakers added twice in default program
• BG-I25140 Invalid room size after duplicating room when using square feet
• BG-I24526 Allow bigger rooms
• BG-I24519 Division units rounded incorrectly
• BG-I24843 Ceiling light Air missing in preselection

Automatic Designer

• BG-I24319 Automatic Designer: invalid rules when using notifications with +/in title
• BG-I24838 Automatic Designer: missing operator for Energymanager in DEU
• BG-I24839 Automatic Designer: inconsistent spaces between conditions and groups
• BG-I16128 Automatic Scene shown for all users after creation

Auto Configuration

• BG-I24640 Page not properly repositioned
• BG-I24467 Device is created in two rooms when a child object is assigned to a different room than the device

Stability

• Config crash when loading from Miniserver
• BG-I24708 Loxone Config runs out of memory space when generating SPS files for Miniserver in a big project
• BG-I24626 Config crash when opening very old project
• Miniserver reboot with invalid file
• BG-I25000 Config crash after editing room
• BG-I25036 Config crash while learning IR commands
• BG-I25111 Config crash when loading from Multiplicator managed Miniserver
• BG-I24805 Watchdog reboot while obtaining current IP address
• BG-I24600 Miniserver reboot when there are percent signs in logger/caller/.. texts
• Miniserver reboot when deleting user while debug monitor is active

New

• AC Control Air
• AC Control function block
• Hörmann Air: Added support to control internal drive light
• Project Planning: Schrack Design file output
• Option to retain last value on receive timeout or out of range error instead of default value
• Meter Reader IR Air: New SML implementation for increased robustness and simplified debugging
• BG-T2802: IR Meter Reader Air: AMIS now informs about wrong AES keys in a system message
• A3D9-T1028 Option to automatically delete user when it expires
• Remember Zoom Position in Config across Config restarts
• Multiplicator: Added reset button that excludes learned devices
• Ceiling Light Air PWM frequency changed to 200Hz
• Import/Export Control preset
• Wallbox: Additional input “charge active”
• Wallbox Tree: Add Switchboard and support for blink-position
• Wallbox Air/Tree: new binaries to support new config features.
• Multiplicator: Only transfer selected user groups to Miniservers
• BG-T2799 Add Master Password-setting for Loxone-Network Devices
• Identify of Dali group actors
• TH1-T177 Gate Controller: Partially open Command
• A3D9-T911 Intelligent Room Controller: defined Manual Temperatures in schedule

Fixed

General

• Updated translations in Husqvarna plugin
• BG-I23903 No small icon in ribbon for link diagnostic button
• IRC API Command: Not actual current temperature used for start value of setting target temperature
• BG-I23929 Device directly starts with update after learning device
• Geiger Remote and Remote Air do not start updates without POR
• Sysmsg prompt for updates is not shown for GeigerRemote
• BG-I11351 wrong timing in the presence block with presence sensor Air/Tree
• BG-I22163 #880897 Flush Presence sensor timeout too long
• BG-I19600 NanoIO topmodule created in wrong order causing problems in IO ordering
• BG-I23488 Page window shows no scrollbar
• BG-I23616 EnumIn web service returns invalid xml due to unescaped characters
• BG-I23666 New created memory flags are not sorted alphabetically in the periphery tree
• Monitors: Initial filter for serial number set to serial without colons
• BG-I22993 Mode via LiveView not switchable in all constellations
• BG-I23703 Dali colour actor has no proper name after learning via search
• BG-I23752 New room dialog not opening when creating room by setting it on a reference
• Monitor dialog: Active/Inactive icons not updated when opening dialog
• Miniserver reboot when token file is too big and takes too long to load
• BG-I23269 DALI colour temperature sometime not sent properly to device in Smart actuator mode
• BG-I23183: Audioserver: commands sent during initialization
• BG-I23573 Newly created devices do not send analog values
• BG-I23598 Device-Status: add padding to header-text
• BG-I23641 Media Control: power off command executed twice
• BG-I23601 Media Control: Digital Virtual outputs not executed for the configured timeout
• BG-I23691 Validated Sensors: prevent check of Receive-Timeout directly after program start
• BG-I23706 Modbus server: remove fast retry for failed sensors when already awaiting pending transactions
• Home Connect: No error message displayed for devices which cant be learned due to wrong state
• BG-I23707 Document title not updated after loading from Miniserver
• Serial Auto: Devices are used multiple times
• Search for Miniserver after update done too early
• BG-I21732 Generic View Tree: scrolling down with arrow keys not working
• BG-I22577 Automatic designer dialog: no information when no rooms/categories exist
• BG-I23756 Undo step after auto configuration
• BG-I23737 HTTP request with special character
• BG-I23532 Replace of user when saving template
• BG-I23633 Room and category cant be edited when selecting multiple different controls on the page
• BG-I23740 Project Validation shows wrong gateway/client intercommunication count
• BG-I23719 Invalid text displayed when deleting project backup
• BG-I23606 Periphery tree filter shows non visualised items when selecting visu filter
• BG-I23742 Text output has no remanence
• BG-I23860 Selection after page rename
• BG-I23785 Wrong or multiple helps are opening
• BG-I23780 Connection references positioned upwards and downwards, causing confusing lines
• Project backups can not be opened
• Installed dlls used for crash dump generation are 64bit
• BG-I23596 EIB-Dimmer: added step-event to loxapp
• BG-I23540 Audio-Zone: No longer operable after performing expert-mode/adopt-ui change
• BG-I23772 Power Supply & Backup: API-Connector not aligned correctly
• BG-I23843 Automatic designer: malformed rule disables executing of all other rules
• BG-I24045 Digital intercommunication input doesn’t have a default value
• Device Learning: Wrong device highlighted with yellow background after learning a device
• Tree device starts update directly after learning
• BG-I23796 Systemmessage not shown in app/config since the control is not found anymore
• BG-I23982 Can’t link controls to another control when its not explicitly used in visualisation and only visible in other controls (e.g. in EFM)
• BG-I23919 Program modified as soon as Touch & Grill gets DC power
• BG-I23792 Air learning via App: No Top modules
• BG-I23908 Loading from Miniserver fails, because Miniserver doesnt know active running program
• View jumps after deleting a control
• BG-I23442 Config fails to transfer update file
• BG-I23504 Config asks to take changes from App when changing access schedules in Config
• BG-I23318 User is authenticated at the Ula output via code although this is inactive on the NFC
• Floating property window comes to the front after closing dialog
• BG-I23916 Tree view jumps when cell is selected with mouse click
• BG-I23946 Setting options sorted alphabetically in Qt views
• BG-I23963 Hostname of network device is reported as not resolvable even if online state is not monitored
• BG-I24078 Object shows assigned/referenced objects which do not exist anymore
• BG-I24047 LiveView/Simulation: Smart Actor shows 0
• BG-I24079 Invalid default Min/Max value for plugin IOs
• BG-I24109 App Learning: Device from client misses information
• BG-I24043 No receive timeout after start
• BG-I24090 Invalid icons for constants
• Find & Replace dialog cant be opened with Ctrl+F/H
• BG-I24144 Memory flag can’t be connected after changing type
• Selected item does not show all siblings when the item is initially filtered
• BG-I24156 Sequence Controller shows active live view but now line marker (it is only done when program is identical)
• BG-I24165 No Miniserver identify from search for clients
• BG-I22976 Automatic Designer: Energy Manager Outputs not visible/selectable
• BG-I23985 Power Supply & Backup: Power-Outputs not selectable in connection-window
• BG-I24046 Clicking show on validation systemmessage does not show item in tree
• BG-I24179 Validation is always active but not shown in settings
• BG-I24043 Switch/Push Button not displayed in liveview when error output is active
• BG-I24007 Inserted references positioned on the other side of the page
• BG-I23804 Monitor: Milliseconds missing after save of Monitor
• BG-I24186 Invalid file times shown in sd management dialog
• BG-I24198 IP not set when adding Client via search
• BG-I24167 Generic Table Filter not properly working (items not shown even if they match the filter)
• BG-I24108 Device Learning dialog: Multiedit row not updated when columns get available afterwards
• BG-I24187 Device-Status: refresh button not disabled on disconnect
• BG-I23819 Changed error message text in MessageCenter when there is no internet connection available
• BG-I23930 Incorrect highlighting in HTTP VIN CmdLearningDialog when content contained mixed line endings
• BG-I23773 Project ‘Last Modification’ timestamp is now stored in UTC and converted to local time when displayed
• BG-I24287 Project ‘Last Modification’ timestamp might be incorrectly read/written to filesystem in rare cases
• BG-I24239 Rating setting (Stars) not intuitive
• BG-I24257 Inserting tree device on compact has problems with selection in periphery tree
• Network Device: Emptying of serial not possible
• Objects which are sorted by switchboard position but don’t have a switchboard are sorted by serial instead of name
• Network Device search: Device cant be replaced when only IP address has changed
• BG-I20745 better automatic name assignment when adding Enocean devices in learn dialog
• BG-I23332 fixed auto scrolling in certain cases in many table views (e.g. device learning dialogs)
• BG-I22832 monitor filter status was not updated upon clearing
• Disabled GPU painting since it is causing issues on some setups
• LoxApp is regenerated after each auto update
• BG-I24325 Custom changes not included in Backup
• BG-I24325 Custom changes break connections to function block and visualisation after an auto update
• BG-I21457 LiveSearch communication started for app learning when starting search via Loxone Config
• BG-I24306 Table View: Edit not started when pressing F2
• BG-I24392 Not working html tags displayed in setting descriptions
• BG-I24341 Link diagnostics and monitor button displayed on every item below the Miniserver
• BG-I24303 Deleting Miniserver compact from Gateway Client project or exporting it keeps hidden Audioservers
• BG-I24393 Parlist: Used audio channels not calculated
• BG-I22958 RS485 Test command opens wrong monitor and always shows ‘timeout’ in the Monitor when no answer is received
• BG-I24408 Hostname not correctly set in project after loading from Miniserver
• BG-I24405 Network intercommunication learning dialog is unresponsive
• BG-I24374 Scrolling through pages while Drag & Drop not working in some cases
• BG-I24308 Learning dialog: Room creation not correctly aborted
• BG-I24391 Cover page title not updated
• BG-I24372 Music Extension Search: Extension Limit not respected
• BG-I24366 Ms Compact Gateway: only create Audioserver if Players or Extensions are used
• BG-I24360 IRC Climate Controllers and Ventilation Controllers not alphabetically sorted
• BG-I24439 Already confirmed systemmessage get confirm action again
• BG-I24373 Ms Compact: fixed dragging multiple audio-players from tree
• BG-I24460 Stereo Extension: not able to delete serial number
• Valve Tree: fixed “maximum” force setting, wasn’t higher than “increased”
• Load speed of sps on big installations
• Wallbox Air/Tree: System-Message “charging error” should be blocking in App
• Modbus-Server: set default timeout to 2s
• BG-I24424 Hörmann Air: Config-Crash when deleting device before referenced control

Devices & Extensions

• AI Extension: 
  • Open wire detection too sensitive
  • Average time was not considered
  • BG-I22125 did not update values
• IR Meter Reader Air:
  • Failed to read power from SML meters
  • BG-I23360 Every second values is wrong
  • BG-I23360 Send interval is ignored
  • BG-I20293 Holley DTZ541-ZDBL can not be read out
• Wallbox Air/Tree:
  • BG-I22695 Modbus NAT Table sync is not working if a sensor is deleted
  • led status is permanently visible
  • changed led status behaviour and brightness
• BG-I16621 Presence/Motion sensors going offline for no apparent reason
• BG-I18806 Interaction Presence Sensor isn’t working in the tree search
• BG-I21375 Presence Sensor: Activates when configuring volume Thresholds
• Valve Tree: increased force at 0% valve position about 7N
• New binaries (14.02.06.06) for Belimo Tree/Air (Fix BG-I23826 and WS for MP-Address check)
• BG-I14503 Wrong state of battery state in Touch & Grill
• BG-I17174 Touch Nightlight Alarm Block Alarm interrupted when As or Asv changes

Lighting

• BG-I23005 Lighting Controller: mode-switch not executed when not using “any mode” option in automatic configuration
• BG-I23763 Lighting Controller: Favourite colour can’t be deleted
• BG-I24452 Lighting Controller: “change to” not switches to “any mode” after all active operating modes go off
• Lighting Controller: Sequence Favourite can’t be deleted

Energy

• Spot Price Optimizer: Enabled visualisation checkbox Preparation for visualisation support
• BG-I23743 EFM: Submeters of a grid meter not possible
• Spot Price Optimizer: Store more future forecasts when in epex mode for display in app
• Epex Spot: Data requested directly after midnight marked as outdated
• BG-I23584 Energy Manager dialog: Invalid minimum size
• BG-I24142 EFM shown as unconfigured after editing via app
• Energy Manager: Not fully configured load sent to app
• Spot Price Optimizer: Finish load cycle early when all needed cycles where done
• BG-I24378 Power Supply & Backup name not shown when adding meter to EFM
• BG-I24211 Energy Manager dialog: Document set to modified even when nothing is changed
• BG-I24232 Wallbox: automatically adapt min/max values when connecting 7,4kW Wallbox device
• Switchboard-Settings for extensions not shown
• BG-I23525 Power Supply Dialog: edit-mode not visible when navigating with tabs

Belimo

• BG-I23696 Belimo Addressing: thread not properly closed
• BG-I23704 Belimo Addressing: Program shown as not identical after closing the dialog
• BG-I23705 Belimo Addressing: enable replace of devices
• BG-I23597 Belimo Device: missing type in device status
• BG-I23695 Belimo device offline message is not removed when device is reverted back to dummy device
• BG-I23829  System Message after addressing device
• BG-I24249 Systemmessage “Device Error” for dummy devices
• BG-I24188 Search started with empty list
• BG-I24223 Addressing: add Multi-Edit-Row
• BG-I24164 Addressing: replacing device does not replace MP-Address
• Belimo Search: Config Crash when showing Report
• BG-I24242 Belimo Search: Messagebox shown during addressing process

Audio

• Stereo Extension still shown offline after replacing it
• Stereo Extension search not constantly running
• Audioserver: Different master system message does not disappear
• BG-I24329 Audioplayer ends active event triggered by Central Music or Player Group

Client-Gateway

• BG-I24369 Gateway/Client: Warning about Miniserver that does not exist anymore when saving to Miniserver

Trust

• BG-I23902 Trust output not sent when it toggles directly after start
• Trust Join: No proper error message when credentials of user have changed
• Trust User not deleted immediately when its deleted from source due to expiration
•  Invalid NFC key sent to trust members when there is no NFC on the gateway
• Manager gets lost from Trust and is not readded
• Trust keeps trying clouddns address even when clouddns resolve fails

Multiplicator

• BG-I23629 Room/Light Groups get duplicate due to program change
• Miniserver is sending trust commands to itself
• BG-I23661 Trust: New users which are in a group can be untrusted via user management
• BG-I23729 Multiedit of password is not allowed
• Backup options not stored
• BG-I23682 Update running message appears twice when closing document
• BG-I23645 Makes a lot of clouddns requests, causing a block by the cloud
• BG-I23852 Missing tree update after control edit
• BG-I23851 Checkboxes not redrawn after edit
• BG-I23777 wrong filter count
• Reset not working when there is a control already modified in source project
• Unreachable Miniservers are retried too fast
• Restore always results that the modification remains
• NFC edit shows wrong parameters
• BG-I23786 No warning/message when trying to overwrite newer changes on a Miniserver with outdated changes
• Monitor online state setting always displayed as modified
• Close warning appears twice
• Edit of Touch Flex configuration setting
• BG-I23739 Transfer setting displayed for objects which don’t support it
• Hostname setting shown
• BG-I23856 Save to all Miniservers not working when 1 Miniserver is not reachable
• BG-I23917 Update of multiple Miniservers at once fails on some Miniservers
• Saving project preselects inheriting project
• Only update Miniservers which need the update
• Connection flags don’t get recreated after reset
• Objects not shown as modified after undo
• No warning when old Multiplicator file gets opened
• Loading from Miniserver show everything modified even after reset
•  Button for opening source Multiplicator file
• Intercommunication outputs are shown as modified after reset
• Connect/Backup/Save/Update multiple Miniserver from tree by selecting them
• Program not identical after save
•  Revert of complete control change while doing some setting changes
• Config crash when resetting
• Added file transfer retry
• Log window not shown
• Improved SPS load speed
• Parallel Update fails sometimes due to access to same file
• Config crash when doing multiple Updates in parallel
• Opening of management dialog slow in big projects

Project Planning

• BG-I23043 Power Supply not adapted, but added in part list
• Invalid Wallbox Type created

Stability

• BG-I23923 Config crash when connection is lost during air search
• BG-I23746 Config crash when saving to Miniserver when there is an old central block on a client
• BG-I23585 Config crash after opening Multiplicator object edit dialog
• BG-I23776 Config crash when joining trust
• BG-I23864 Config crash when starting IR module search
• BG-I23878 Config crash when selecting dimmer outputs
• BG-I23948 Config crash when inserting IR actor/sensor
• BG-I23921 Miniserver reboot when adding 1-wire data received over air to 1-wire monitor
• Config crash when closing config while Multiplicator projects are opened
• BG-I24021 Config crash when loading from Miniserver
• BG-I23725 Miniserver reboot when learning Aquastar Air via App
• Config crash when restoring backup
• BG-I24163 Miniserver reboot when loading trust changes
• BG-I24413 Config crash in Multiplicator deviations dialog
• BG-I24409 Config crash when opening Multiplicator edit dialog twice
• BG-I24401 Config Crash when loading from the Miniserver
• BG-I24457 Miniserver reboot when having a lot of extensions
• NFC Key: Miniserver crash when there are too many trust participants
• Trust: Miniserver reboot when Member is removed
• Config crash after editing control presets
• Config crash when saving to Miniserver