Multiple function push-button with up to four functions, pulse after click
Table of Contents
Inputs↑
| Abbreviation | Summary | Value Range |
|---|---|---|
| Tr | Trigger | 0/1 |
| R | Reset | 0/1 |
Outputs↑
| Abbreviation | Summary | Value Range |
|---|---|---|
| O1 | Pulse when (Tr) ≤ (TI) | 0/1 |
| O2 | Pulse when (TI) ≤ (Tr) ≤ 2x(TI) | 0/1 |
| O3 | Pulse when 2x(TI) ≤ (Tr) ≤ 3x(TI) | 0/1 |
| O4 | Pulse when 3x(TI) ≤ (Tr) | 0/1 |
| V | Value (V1-4), depending on time of input (Tr) | ∞ |
Parameters↑
| Abbreviation | Summary | Description | Unit | Value Range | Default Value |
|---|---|---|---|---|---|
| Rem | Remanence input | Remanence input: If active, the function block retains its previous state after a Miniserver reboot. The state of the function block is saved: – When saving to the Miniserver – At a planned reboot – Before a backup – Once per hour The data is saved on the SD card. |
- | 0/1 | 0 |
| TI | Interval | s | 0...∞ | 0,35 | |
| D | Duration output pulse | s | 0...∞ | 0,1 | |
| V1 | Value 1 | - | ∞ | 1 | |
| V2 | Value 2 | - | ∞ | 2 | |
| V3 | Value 3 | - | ∞ | 3 | |
| V4 | Value 4 | - | ∞ | 4 |
Timing Diagram↑
