The Tree to Air Bridge is used to integrate various devices that are equipped with the Loxone Air wireless technology. It is connected via the Tree interface and features a compact design with integrated antenna. Due to the limitation of 50 devices per Tree branch, up to 49 Air devices can be paired to the Tree to Air Bridge.
It can be used, for example, in areas where the wireless range of an Air Base Extension is no longer sufficient, but where connection to a Tree Branch is possible.
Table of Contents
Commissioning↑
The Tree to Air Bridge is installed in a suitable enclosure.
Connect the power supply and Tree communication wires.
|
For best signal performance, make sure that the device is not in close range of metal objects. |
The Tree to Air Bridge starts after switching on the power supply, and the status LED will flash orange after a short time when the connection to the Miniserver is established.
Then follow the pairing procedure on the Tree Interface.
Pairing Air Devices↑
Up to 49 Air devices can be paired with a Tree to Air Bridge. Any additional Tree devices on the Tree branch in use reduce the number of possible Air devices. The maximum total number of Tree and Air devices including Tree to Air Bridge on one branch is always 50 devices.
Like the Air Base Extension, the Tree to Air Bridge does not work as a repeater. If Air devices are to communicate with the system via the Tree to Air Bridge, they must be paired with it.
Instructions for pairing Air devices.
Diagnostic Inputs↑
| Summary | Description | Unit | Value Range |
|---|---|---|---|
| Online Status Air Base Extension | Indicates whether the device can be reached by the Miniserver. Diagnostics for Air devices Diagnostics for Tree devices Diagnostics for Extensions |
Digital | 0/1 |
| Channel Free Air Base Extension | Indicates whether the device can be reached by the Miniserver. Diagnostics for Air devices Diagnostics for Tree devices Diagnostics for Extensions |
Digital | 0/1 |
Properties↑
| Summary | Description | Default Value |
|---|---|---|
| Monitor online status | When selected, you will be notified via System Status or the Mailer if the device is no longer available or goes offline. | - |
| Serial number | Specifies the serial number of the device. For Extensions: Enter 'Auto' to automatically pair an extension with unknown serial number. This can only be used if there is only one Extension of the same type. Save into the Miniserver, in order to pair the Extension. Afterwards the program must be loaded from the Miniserver to transfer the actual serial number of the Extension into the program. |
- |
| Device type | Tree device type | - |
| Region (channel) | The selected region affects the operation frequency Please be aware of local government regulations! |
- |
| Run Air Device Update individually | Only one air device is ever updated at the same time, which reduces the utilization of the radio channel. | - |
| Automatic air device pairing until… | Until that date, Air devices added manually with serial number will be paired automatically as soon as they are found. | - |
| Encryption Key | Key for the 128bit AES encryption of Air communication. Hexadecimal, 32 byte length. | - |
| Recreate Encryption Key | Create a new encryption key. Already learned devices need to be relearned! | - |
Safety Instructions↑
Installation must be carried out by a qualified electrician in accordance with the applicable regulations.
This device must be mounted in an electrical enclosure to ensure protection against contact, water and dust.