Ramp control using 2 levels
Table of Contents
Inputs↑
| Abbreviation | Summary | Description | Value Range |
|---|---|---|---|
| Off | Off | Pulse: Outputs are reset / switched off. On: Block is locked. Dominating input. |
0/1 |
| S | Step selection - 0 = (L1), 1 = (L2) | 0/1 | |
| St | Stop | When 1 (V) = (Sv) | 0/1 |
Outputs↑
| Abbreviation | Summary | Value Range |
|---|---|---|
| V | Value | ∞ |
Parameters↑
| Abbreviation | Summary | Description | Value Range | Default Value |
|---|---|---|---|---|
| Rem | Remanence input | Remanence input: If active, the function block retains its previous state after a Miniserver reboot. The state of the function block is saved: – When saving to the Miniserver – At a planned reboot – Before a backup – Once per hour The data is saved on the SD card. |
0/1 | 0 |
| Sv | Start value | When 1 (V) = (Sv) | ∞ | 5 |
| Sts | Step size | (V) is changed by this value every 100ms until the target value is reached. | 0...∞ | 1 |
| L1 | Step 1 | ∞ | 7 | |
| L2 | Step 2 | ∞ | 3 |